Trade-offs for conflicting social objectives in the extraction of finite energy resources

Three social objectives figure prominently in the extraction of finite energy resources, namely income maximization, environmental quality, and inter-generational concern. Owing to lack of complementarity, the pursuit of these objectives often results in conflicts. As a result, extraction strategies should be based on the determination of trade-offs between the objectives. The paper deals with the formulation and illustration of a systems model to determine these trade-offs. The recognition of such trade-offs results in a greater conservation of the finite energy resource, and hence could act as an incentive for the development of alternative energy sources.     

Paste Residence Time in a Spouted Bed Dryer. III: Effect of Paste Properties and Quality Interactions

The aim of this study was to evaluate the effects of paste properties on residence time during drying in a spouted bed dryer with inert bodies. The effect of paste solids content, surface tension, and viscosity on the residence time distribution and the mean residence times were studied using factorial experimental designs. The inert bodies used were glass and polyethylene beads. The mean residence times varied from 13.6 to 16.3 and 12.2 to 17.7 min for drying on glass and polyethylene beads, respectively. The analysis of variance showed that mean residence times significantly depended on solids content and surface tension for glass beads and also on viscosity for polyethylene beads. The residence time distributions for all conditions studied fitted well to the perfect mixing cell when applying the continuous stirred vessels in series model analysis. The powder density, flowability, and particle size depended on paste properties and inert type.     

简易高性能纳秒脉冲发生器

为了实现电子散射飞行时间谱仪电子束的脉冲化及产生时一幅变换器的启动或停止信号。我们利用开关晶体管的雪崩特性研制了一个性能好，成本低的纳秒脉冲发生器。该发生器输出上升时间好于Ｉｎｓ，幅度达１０Ｖ的负尖脉冲，用作时一幅变换器的启动或停止信号；也输出上升时间约３ｎｓ，幅度５－３０Ｖ连续可调和宽度５－２３０ｎｓ可调的正脉冲，用作电子束脉冲化的调制信号，脉冲重复率为１５０×１０＾３ｓ＾－１。它可广泛用于类似     

Use of ultrafiltration for preparing improved tomato pulp

The characteristics of high-quality tomato pulp (commercial def.: crushed or diced tomatoes with about 30% tomato juice as packing medium) canned with tomato juice pulp enriched by ultrafiltration as packing medium were compared with those covered with conventional vacuum-concentrated juice.
Both hot- and cold-break products were prepared and those containing 20% serum-reduced packing juice proved to be the best, showing no signs of syneresis on storage and with improvements in sensory properties, colour and non-enzymatic browning; some volatile components were reduced.     

Dough mixing and breadmaking properties of quinoa-wheat flour blends

Flour blends of quinoa-wheat containing 0, 5, 10, 15, and 20% of manually dehulled quinoa meal or flour were evaluated for dough mixing and breadmaking properties and liking of the bread by a small panel. Increasing amounts of quinoa meal or flour increased farinograph absorption and dislike of bread for most of the panel. Dough development time increased with increase in meal but decreased with increase in quinoa flour. At 10% inclusion levels differences in liking from control 100% wheat flour bread were smaller for flour or water extracted meal to most of the panel, than with 10% non-extracted meal. This suggests that 10% inclusion of flour or water extracted meal may have potential for further investigation.     

隧道工程施工中应注意的问题

通过对海南省东线高速公路大茅山隧道施工的全程监理,阐明了在施工中应重点注意的几个问题,在此基础上,总结出隧道工程质量监督中必须做到的几点,以确保隧道工程施工安全及工程质量.     

Evaluation of capital cost data. part 7: Liquid waste disposal with emphasis on physical treatment

Capital cost correlations are given for oil-water separators, equalization basins, primary clarifiers, clarifiers and clarifier mechanisms, reverse osmosis unit, ultrafiltration units, gravity filters and miroscreens. Data are included for raw sewage, intermediate and recirculation pumping stations and for preliminary treatment (or bar screens, grit removal, overflow and bypass chamber and Parshall flume), for grit removal, comminution and gas stripping. The correlations are accurate to ± 30%, expressed in Canadian dollars and adjusted to a Marshall and Swift value of 1000. Details as to what components are included in the cost are given. Data are given for the labour and material costs to create a working process module. For inflation indices, a critique of the Engineering News Record, EPA small city, Marshall and Swift, Chemical Engineering and Southam inflation indices suggested that the Marshall and Swift index is most appropriate for the construction and process equipment studied here. Concerning the currency exchange, for the equipment and processes in this study, equipment costs the same whether expressed directly in US or Canadian dollars. To put the current data into perspective, several hundred sources of cost data were analyzed. The major correlations are compared, on a consistent basis, with current data.     

Design and Characterization of the CLIMPAQ,Chamber for Laboratory Investigations of Materials,Pollution and Air Quality*

A test chamber has been developed in order to provide a small and simple emission testing facility capable of testing construction products in a climate where the important climatic parameters such as temperature, ventilation rate and air velocity can be varied independently around typical indoor values. The test chamber CLIMPAQ is made of panes of window glass. Other main surface materials are stainless steel and eloxated aluminium. The chamber has a volume of 50.9 litres and is designed to meet the requirements for quantifying air pollution. In this investigation human subjects acted as air pollution judges, and chemical characterization of the air pollution was carried out. Carpet, linoleum, wall paint and seal- ant were tested simultaneously in the CLIMPAQ and in four other chambers ranging from a full-scale chamber of 28 m³ to a field and laboratory emission cell of 3.5· 10^?5m³. Product ranking is the same in all chambers for the sensory measurements. Emission rates based on sensory measurements differ for all products less than 100 % except for tests in a 3-litre chamber where emission rates were higher. Chemical measurements differ up to approximately 10 times for the same product in different chambers. Deviations appear to be the result of different environmental parameters in the various chambers. Low air concentrations or high specific ventilation rates seem to increase emissions, while differences in air velocities and sink properties may also be the cause of differences in emission rates.     

Hydrogen and Calcium Ion Concentrations Affect Volume of CO2 Puffed Diced Green Bell Peppers

Diced green bell peppers were soaked in a solution of hydrochloric acid or calcium chloride, air-dried to 50% moisture, held in CO₂ at 5.8 MPa for 1, 3 or 5 min, and puffed by abruptly releasing the CO₂ pressure. Treatment with 1% CaCl₂ increased the size of puffed-dried products as compared to a control; however, HCl treatments did not. The treatment with 1 or 2% CaCl₂ reduced shrinkage as compared to the control. The 1% CaCl₂ treatment may have increased the CO₂ saturation rate.