聚丙烯塑料中二叔丁基过氧化物的测定

研究了在冰醋酸－盐酸介质中，以ＮａＩ作还原剂，Ｆｅ３＋作催化剂，测定二叔丁基过氧化物的条件，建立了在１００℃条件下催化碘量法测定二叔丁基过氧化物的新方法。该法用于聚丙烯塑料中微量过氧化物的测定，准确、可靠、方便。回收率为９８．７％，相对标准偏差为０．６４％。     

PET工程塑料概况

综述了PET工程塑料合金化方面的主要研究开发情况，就PET／PBT、PET／PC、PET／聚酯聚醚、PET／尼龙、PET／PE等合金的研究及应用情况作了简单介绍。     

可发泡性酚醛树脂的合成研究

考查了可发泡性酚醛树脂的合成条件,如反应时间、温度和催化剂用量等对树脂活性、物理以及酚醛泡沫塑料容重和表观品质的影响,结果表明:催化剂用量越大,树脂粘度越大,泡沫固化时间越长;反应时间介于65～95min,泡沫塑料容重和表观品质较好;用加热板测定了合成的可发泡性树脂的固化速度,并求出固化反应活化能。     

Epoxy-Polysulfone Networks as Advanced Matrices for Composite Materials

Compatibility between polysulfone (PSF) and epoxy oligomers in the melt state as well as the morphology and properties of alloys obtained were studied as a function of composition. The compatibility depends on the length and structure of epoxy molecules, and is best in the case of epoxysulfone oligomers (ESO).

The properties of hybrid matrices are determined by their composition and morphology. The most pronounced effects are observed in the regions of small concentrations of either component. A small quantity of PSF significantly improves thermal stability and heat resistance of the epoxy resin as well as its impact strength. On the other hand, on addition to PSF of small amounts of epoxysulfone oligomers, the processability of the matrix can be substantially improved. In particular, the melt viscosity decreases, and wetting and impregnation of fibrous reinforcement is facilitated. Besides, the matrix adhesion to fibers is increased.

Powdered PSF/ESO/curing agent mixtures are good for application in solvent-free technological processes of fibrous composites production, e.g. in electrostatic deposition of matrix particles onto a reinforcing fabric. Plastics based on hybrid matrices are distinguished by improved strength.     

泡沫塑料主要力学性能及其力学模型

描述发泡塑料力学性能的模型,讨论了普通发泡塑料的力学性能以及它和发泡塑料密度的关系。并且比较了硬质聚氨酯(RPUR)和聚氯乙烯(PVC)泡沫塑料的主要力学性能随密度的变化。最后介绍了微孔发泡塑料的几项优良的力学性能。     

Effect of coal filler on the properties of soy protein plastics

The influence of ultrafine coal filler (UFC) content on tensile properties, water absorption, and biodegradability of soy protein plastics were investigated. The addition of UFC in the soy protein plastics, with different content of glycerol as a plasticizer, was at different ratio varying from 10:0 to 6:4. Blend sheets of the soy protein composites were prepared by the compression molding processing. The results show that, with 23.08 wt % glycerol, the tensile strength and elongation at break for the soy protein sheet with coal filler (range from 5 to 30 parts) can be enhanced as compared with nonfilled soy protein plastics. Water resistance of the soy protein plastics improves with the increase in UFC content. The derivative thermogravimetry (DTG) curves indicate a double‐stage degradation process for defatted soy flour (SPF), while three‐stage degradation process for soy plastics and the soy protein composites. FT‐IR, XPS, and SEM were applied to study the interfacial interaction between coal macromolecules and soy protein molecules in UFC filled soy protein plastics. The results demonstrated that there is strong interfacial interaction in the soy protein plastics caused by the compression molding processing. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3134–3143, 2006     

塑料挤出成型模具流道优化设计

本文依据流变学理论，采用优化方法进行挤出成型模具（即机头）流道设计，探讨了建立流道优化数学模型的有关问题。     

1991—1992国外工程塑料进展

介绍了1991～1992年国外工程塑料研究和生产概况。论述了通用工程塑料、特种工程塑料和聚合物合金的研究开发、改性和应用方面的进展。且指出工程塑料发展趋势和特点;对复合材料技术进展作了较详尽的分析与阐述。     

淀粉-聚乙烯醇可生物降解塑料研究进展

本文详细综述了近年来国内外淀粉基聚乙烯醇塑料的研究进展。     

再生混凝土力学性能提升技术与应用

针对大量混凝土废弃物造成生态环境日益恶化及天然骨料资源日益缺乏的问题,通过配制不同强度等级和不同再生骨料掺量的再生混凝土,并结合锡澄运河三级航道整治工程对再生混凝土力学性能及其提升技术进行试验研究。结果表明:再生骨料的掺量对C35及以下中低强度混凝土力学性能影响较小,而对C40及以上中高强度混凝土有较大影响,随再生骨料掺量的增加,再生混凝土力学性能降低;通过合理选用再生骨料级配、与天然骨料复掺、对再生骨料进行强化以及优化配合比参数等措施能提升混凝土力学性能;锡澄运河三级航道整治工程实际应用取得了很好的技术经济效益。