PVA基活性碳纤维的研制

探索了由民用大丝束聚乙烯醇纤维(PVAF)试制活性碳纤维(ACF)的可能性,以开辟新的原料路线,降低产品成本。PVAF首先用脱水剂处理,脱水剂浓度为10%(质量),然后在200—300℃进行热处理,处理后的纤维再经预氧化和碳化活化转化为ACF,ACF的收率为37.7%,比表面积为1050m~2/g。此外,还探索了用O_3处理PVAF。用差热、热失重和红外等手段对产物进行了表征,推论了相应的反应机理。结果表明:经适当处理的PVAF可制得具有较好吸附性能的ACF。     

UHMWPE混炼接枝马来酸酐研究

讨论了超高相对分子质量聚乙烯(UHMWPE)混炼接枝马来酸酐(MAH)过程中，单体MAH用量、引发剂DCP用量、交联抑制剂己内酰胺(CAILA)用量、流动改性剂硬脂酸钙(CaSt2)用量及混炼温度、时间等工艺条件对UHMWPE接枝率和凝胶含量的影响。用红外光谱表征了接枝物的存在。并用滴定分析法和重量分析法测定了接枝物UHMWPE～g～MAH的接枝率和凝胶含量。实验表明，MAH用量为5份、DCP为0．15份、CALA为0．1份、CaSt2为1份时。混炼温度175∽180℃。混炼时间14min时，可得到接枝率0．75％、凝胶含量1．48%的UHMWPE接枝物。     

宁波市蛇蟠岛应急水源地建设与环境效应

在评价宁波市蛇蟠岛淡水资源量的基础上,估算其应急供水规模。通过构建地下水数值模型,预测在应急开采条件下地下水位恢复能力,并对应急开采产生的地下水降落漏斗、地面沉降和咸水入侵等环境效应进行了评价。结果表明,蛇蟠岛地下淡水具有应急水源地建设可行性,为该地区进一步勘查应急水源地提供了依据。     

流域一体化下的生态文明先行示范区建设探索

以抚仙湖流域为研究区域,通过系统收集分析流域多年水量水质监测数据,诊断流域保护与发展面临的主要矛盾,并基于流域一体化管理思想,提出了流域保护与发展的可能路径:1创新抚仙湖流域生态文明示范区行政管理体制,从发展思路确立抚仙湖流域实施"严格环境保护、创新生态发展"的转型战略,真正树立和实现"大景区"环境保护和"大旅游"产业发展的生态文明建设理念;2在全面实现生态发展战略的前提下,建议将流域实施分区管控,调减农业用地面积,积极发展现代观光农业和旅游业;3通过生态搬迁,优化城乡布局,实施抚仙湖流域全域"大旅游景区"战略,实现生态资源-资产-资本的良性转化。     

粘土结合耐火浇注料的研制

选用山东特级焦宝石、贵州焦宝石、河南三级高铝矾土熟料和山西阳泉特级高铝矾土熟料为骨料 ,河南三级高铝矾土熟料和山西阳泉特级高铝矾土熟料的球磨粉为基质 ,广西软质粘土为结合粘土 ,三聚磷酸钠、六偏磷酸钠、柠檬酸钠、酒石酸钠、酒石酸钾钠、碳酸钠 6种钠盐作分散剂 ,铝 60高铝水泥作促凝剂 ,配制了 4种不同组成的粘土结合耐火浇注料。在试验研究的基础上 ,分析了不同分散剂对广西软质粘土的分散效果 ,分散剂在粘土 -水体系中的分散机理和不同骨料对粘土结合耐火浇注料性能的影响。结果表明 :分散剂的分散效果以六偏磷酸钠为最好 ;以广西软质粘土作结合剂 ,用烧结良好的特级高铝矾土熟料作耐火骨料研制的粘土结合耐火浇注料 ,用水量少 ,气孔率低 ,结构致密 ,强度高     

管材超声波分层缺陷检测中盲区的构成探析

管材超声波分层检测作为控制产品质量的关键步骤,必须引起相关从业人员的重视,特别是要重点分析分层缺陷检测中盲区的构成原因和分布特征。只有这样,才能切实保证检测结果的准确性,更好地控制管材质量。通过对超声波分层缺陷检测的重要性进行阐释,分析了其中盲区的构成和分布等问题。     

Corrosion and mechanical behavior of fusion bonded epoxy (FBE) in aqueous media

In recent years there have been many reported cases of corrosion failure in cement concrete pipelines. In the majority of cases, the failures have been attributed to rebar corrosion which is caused by the permeability of chloride from low resistivity soil and subsequent attack on a passive layer on an iron bar in the structure. As a possible alternative to cementitious materials, some organic coatings based on olefin, vinyl or epoxy-based polymers have been considered. However, due to a paucity of data on the behavior of these coatings in aqueous media— particularly product water—the possibility of their application in water transmission systems in the Kingdom has not been fully exploited. This paper deals with the studies carried out on the corrosion and mechanical behavior of fusion bonded epoxy (FBE) coating on steel in aqueous media which include product water, distilled water and saline water. The mechanical testings on coating include adhesion, bending and cathodic disbondment testings. The corrosion studies include immersion testing under static and dynamic conditions, autoclave tests and accelerated (salt-fog) tests. The analysis of results indicates chemical inertness of FBE coating in either of the aforementioned water used during testing, good adhesion and no damage to the coating during bending. Cathodic disbondment tests indicate that FBE coating sustains under cathodic protection (CP) conditions. In general, the results of mechanical and corrosion tests indicate that FBE is a promising material for internal coating on steel in water transmission systems.     

Preparation and characterization of trilobal activated carbon fibers

The objective of this research was to evaluate the effectiveness of several different methods for controlling the pore size and pore size distribution in activated carbon fibers. Variables studied included fiber shape, activation time, and the addition of small amounts of silver nitrate. Pure isotropic pitch and the same isotropic pitch containing 1 wt.% silver were melt spun to form fibers with round and trilobal cross sections. These fibers were then stabilized, carbonized, and activated in carbon dioxide. Field emission scanning electron microscopy (FE SEM), electron dispersive spectra (EDS), and wavelength dispersive spectra (WDS) were used to monitor the size and distribution of the silver particles in the fibers before and after activation. Each of these analyses showed that the distribution of silver particles was extremely uniform before and after activation. The fibers were also weighed before and after activation to determine the percent burn-off. The BET specific surface areas of the activated fibers were determined from N₂ adsorption isotherms measured at −196 °C. The results showed that round and trilobal fibers with equivalent cross-sectional areas yielded similar burn-off values and specific surface areas after activation. Also, activation rates were found to be independent of CO₂ flow rate. The porosity of the activated fibers depended on the total time of activation and the cross-sectional area of fibers. The N₂ adsorption measurements showed that the activated fibers had extremely high specific surface areas (greater than 3000 m²/g) and high degrees of meso- and macro-porosity. FE SEM was also used to investigate surface texture and size of pore openings on the surfaces of the activated fibers. The photos showed that silver particles generated surface macro- and mesopores, in agreement with the inferences from N₂ adsorption measurements.     

带未知干扰的模块化航天器系统相对轨道的队形控制

基于多智能体系统一致性理论,在有向拓扑结构中对模块化航天器相对轨道的队形控制问题进行研究.考虑与状态相关的未知外部干扰,在存在模块质量不确定性的情形下,基于自适应增益技术,设计仅依赖模块自身及其邻近模块信息的分布式控制算法,并通过Lyapunov稳定性方法证明闭环系统是渐近稳定的.最后在Matlab/Simulink中对6个模块组成的模块化航天器系统的队形进行仿真分析,仿真结果表明所设计的控制律是有效且可行的.     

Stabilized heteropolyacid/Nafion composite membranes for elevated temperature/low relative humidity PEFC operation

Organic/inorganic composite membranes with different inorganic heteropolyacid (HPA) additives maintain sufficient proton conductivities for atmospheric pressure elevated temperature (>100 °C) polymer electrolyte fuel cell (PEFC) operation. However, membrane and membrane electrode assembly (MEA) processing is severely curtailed because of the solubility of the HPA additives in aqueous media. Composite membranes with the HPA (phosphotungstic acid; PTA) additive rendered insoluble by ion exchanging protons with larger cations such as Cs⁺, NH₄⁺, Rb⁺ and Tl⁺ were fabricated. The additive loss in aqueous media was lowered from nearly 100% (unmodified HPA) to about 5% (modified HPA). The membranes were robust, and demonstrated low H₂ crossover currents of around 2 mA/cm² for a 28 μm thick membrane. All membranes were evaluated at high temperatures and low relative humidities in an operating fuel cell. The conductivities of the composite membranes at 120 °C and 35% relative humidity were on the order of 1.6 × 10⁻² S/cm.