Etude electrochimique de differentes ilmenites

The electrochemical behaviour of several natural ilmenites has been studied by cyclic voltammetry. From the analysis of the current-voltage curves it was concluded that the valences of the metal ions in FeTiO₃ are Fe^II and Ti^IV. It was also found that little amounts of Fe^III and excess of Ti^IV (probably TiO₂) can enter into the composition of the ilmenites.     

杀虫植物的研究新进展及应用发展前景

介绍了近几年杀虫植物研究的新进展，主要包括楝科、卫矛科、豆科、菊科、胡椒科、百部科、瑞香科等科杀虫植物的作用方式和部分植物的有效成分与作用机制及杀虫植物的应用概况，并分析了其应用发展前景。     

On the preparation and properties of CuZSM-5 catalysts for NO decomposition

Equilibrium exchange isotherms were determined for the exchange of Cu²⁺ with NaZSM-5 at varying Cu(Ac)₂ concentrations in solutions of constant volume and zeolite weight. At low Cu²⁺ levels the solid scavenged all the copper ions. When copper could be detected in the equilibrated solutions, overexchange was observed. The extent of overexchange was higher at pH 6 than at pH 4. These results were analyzed in relation to catalytic activity.On leave from the Central Institute for Chemistry, Hungarian Academy of Sciences, H1525 Budapest, Hungary.     

SIMULATION AND ESTIMATION OF LONG MEMORY CONTINUOUS TIME MODELS

Abstract. Some general properties of long memory continuous time processes are recalled or proved. Methods of simulation are studied. A comparison with the usual discrete time autoregressive fractionally integrated moving-average filter is made and illustrations are provided. Then, two methods of estimation of the parameters of such a model from a discrete sample are studied, both theoretically and empirically, with Monte Carlo experiments.     

Configurational statistics of copolymers prepared by complex-radical polymerization

Radical copolymerization is considered theoretically taking into account the effect of complexing on the configurational statistics of macromolecules formed. Akinetic model has been developed that considers, apart from the ordinary addition of single monomer units to a propagating chain, the possible addition of monomer unit pairs along with a complexing agent in the form of a ternary complex. Within the framework of this model, the problem of calculating the probabilities of formation of any sequences of monomer units (taking into account their microtacticity) in a macromolecule has been rigorously solved as well as the problem of finding the composition distribution of the copolymer formed. It has been shown that this distribution is described by a conventional Gauss law and the appropriate parameters are given. Possible generalizations of the suggested approach are indicated.     

Slow stable crack growth in high density polyethylenes

The phenomenon of slow stable crack growth in polyethylene is investigated using notched specimens subject to constant load and the concepts of fracture mechanics. The effect of specimen geometry and dimension, the loading and the mode of loading on the applied stress intensity factor versus crack speed ($\text{K}{}_{\mathrm{c}}\text{-}\text{a}\text{?}$) curves has been studied to demonstrate that K_c is the controlling stress parameter for crack growth under suitable conditions. $\text{K}{}_{\mathrm{c}}\text{-}\text{a}\text{?}$ curves are obtained for a high density polyethylene homopolymer in distilled water and in a diluted detergent solution at four different temperatures. Results are also obtained for a much tougher medium density polyethylene copolymer whenever possible. Several mechanisms can be identified from the form of the $\text{K}{}_{\mathrm{c}}\text{-}\text{a}\text{?}$ curves. Two, in particular, have been observed but not explained before: (i) crack growth with a time dependence of 0.25, and (ii) the high $\text{K}{}_{\mathrm{c}}\text{-}\text{a}\text{?}$ slopes for crack growth in a tough copolymer. With the help of scanning electron microscopic studies of the fracture surfaces, (i) is postulated to be due to diffusion controlled void growth process and (ii) is considered to be the result of crack tip blunting effects. From the temperature dependence of crack growth, the activation energy of the diffusion controlled crack growth process is found to coincide with that of the x-relaxation process in polyethylene implying that diffusion controlled crack growth may be related to the motion of main chains in the polymer.     

金安金沙江悬索桥隧道式锚碇变形破坏机制研究

隧道式锚碇的变形破坏机制涉及到结构与围岩的协同作用问题。以华丽高速公路金安金沙江悬索桥两岸隧道锚变形破坏机制为研究对象,利用工程类比法评价了其稳定性控制要素,设计了超载数值试验。根据塑性区的扩展过程确定了施工安全监测和需要采取预加固的重点部位,确定了隧道锚围岩的破坏模式。根据锚面监测点位移由mm到cm量级突变确定的两岸锚岩系统极限荷载均为6~8倍设计缆力,则锚岩系统的设计承载力取3倍设计缆力下变形安全是有保障的。丽江岸塑性区在10 P下贯通;华坪岸塑性区在14 P下贯通。设计缆力作用下,丽江岸锚碇最大位移1.5 mm、围岩1.2 mm、地表0.5 mm;华坪岸锚碇最大位移1.7 mm、围岩1.5 mm、地表0.7 mm,其响应顺序为后锚面监测点前锚面监测点锚碇中间岩体地表点,可作为后期结构及围岩安全监测布点和预警的参考,也证明当前设计缆力下变形和强度均是安全的。     

An analysis of transport phenomena for multi-solid particle systems at higher reynolds numbers by a standard karman—pohlhausen method—I Momentum transfer

Using the concentric spheres free surface model and a standard 4th polynomial Karman—Pohlansen method, the dimensionless tangential stress distribution, and the dimensionless pressure distribution around a solid sphere in a swarm, and the viscous, form and total drag coefficient for multi-solid particle systems were computed numerically at higher Reynolds numbers. The void function obtained from the drag coefficient for multiparticle system was comparative to the experimental data. The friction factor for multi-particle systems so computed agreed with the experimental data of packed and distended beds.     

纳米SiO2粉体的制备与研究

纳米SiO2粉体的制备是以硅酸钠和盐酸为原料，添加适宜的稳定剂(非离子表面活性剂)和分散剂，在适宜的pH值和温度下，采用化学沉淀法合成。研究表明，要得到性能优良纳米的SiO2粉体，最佳工艺条件为：温度20～40℃，pH=6，反应液质量浓度P1=20g／L，P2=1．20g／L，反应时间15min。结果表明：制备的纳米SiO2粒径30～50nm，比表面积大，分散性好，质量优良，可达到产业化的生产。