低渗透油田套管损坏机理分析及防治措施

在注水开发油田,油水井套管损坏是一种极为普遍的现象,但又各具特点.通过对鄯善油田套管损坏井的自身特点进行统计、归纳,深入分析低渗透砂岩油藏套管变形影响因素和作用机理,提出了套管损坏井的预防及相应治理措施.     

A Novel Segmentation and Feedback Model for Resolving Contention in Optical Burst Switching

A novel segmentation and feedback model (SFM) applied to resolve contention is proposed. Simulation and performance analyses show that the SFM effectively avoids contentions in optical burst switching (OBS). The long delay time of deflection routing and the immature technology of wavelength converters and optical buffers are not deployed in the SFM. The SFM does not only realize fast switching but also allows preemption by higher priority bursts.     

Effect of surfactants on phenol removal by the method of polymerization and precipitation catalysed by Coprinus cinereus peroxidase

The removal of phenol by peroxidase‐catalysed polymerization was examined using Coprinus cinereus peroxidase in the presence of surfactants. The non‐ionic surfactants with poly(oxyethene) residues, Triton X‐100, Triton X‐405 and Tween 20, enhanced the phenol removal efficiency at a level similar to high relative molecular mass poly(ethylene glycol) (relative molecular mass 3000). Although the improvement in the removal efficiency was less than that of Triton X‐100, Span 20, sodium lauryl sulfate (SDS) and lauryl trimethylammonium bromide (DTAB) also enhanced the removal efficiency. The requirement of the enzyme for almost 100% removal of 100 mg dm^?3 phenol decreased to one‐fourth by the addition of 30 mg dm^?3 Triton X‐100. Triton X‐100, Triton X‐405, Tween 20 and DTAB could reactivate the enzyme precipitated with the phenol polymer, leading to the restarting of the phenol removal reaction. Copyright © 2003 Society of Chemical Industry     

An investigation of the unstable region for dense phase conveying in sliding bed flow

For fine powdered materials, capable of being conveyed in dense phase, a conveying region exists in which instability in flow and pipeline blockage can occur if the pressure gradient available is insufficient to maintain a minimum value of solids loading ratio. A reduction in material flow rate can also lead to pipeline blockage in this region. Conveying trials under-taken with cement are used to illustrate the nature of the problem.     

华北油田隐蔽油藏勘探实践与认识

随着勘探的不断深入,华北油田富油凹陷构造油藏的勘探程度越来越高,勘探对象日趋复杂,勘探难度越来越大。面临勘探现状,华北油田认真分析勘探形势,立足资源基础,解放思想,积极转变勘探观念,有意识地加强隐蔽油气藏的深入研究与勘探,先后在冀中坳陷的饶阳凹陷、二连盆地的巴音都兰凹陷、乌里雅斯太凹陷等发现了多个规模富集的隐蔽油藏。通过隐蔽油藏的勘探实践,取得了四点主要认识、六点重要启示,对今后深化华北油田隐蔽油藏的勘探具有重要的指导作用。     

安塞低渗油田孔隙结构对渗流特征曲线的影响

渗流曲线的测定是认识油藏流体渗流规律的基础。实验发现安塞油田储集层岩心渗流曲线在低有效净围压下近似表现为两段直线，通过压汞实验和毛管压力曲线数据分析，认为这种特征与储集层孔隙结构有关。在分析渗流特征时应综合考虑孔隙结核特征、流体与孔隙介质的相互作用等因素。     

Possibilities and extension of XRD material response analysis in failure research for the advanced evaluation of the damage level of Hertzian loaded components

Due to clearly distinguishable damage symptoms, it is differentiated between the surface and sub‐surface failure mode of rolling bearings. Material states red out by X‐ray diffraction (XRD) residual stress measurements point to a variety of loading conditions especially at raceway surfaces that are associated with several competing failure mechanisms. The corresponding lifetime reduction can range from the lower fatigue strength region to material ratcheting in extreme cases. Relevant position of the microstructural changes and nature of the failure mechanisms are characterized. The time alteration of the XRD material parameters measured at or near the surface and at the depth of the maximum equivalent stress correlates, in a different manner, with the statistical parameter of the 10 % bearing life. Both failure modes are illustrated by concrete examples. Contaminated lubricant and boundary lubrication, which represent practically important surface‐induced failures, are discussed in more detail. Gray staining, i.e. shallow pitting, often occurs without distinct indication of global material aging by means of XRD characteristics. Here, scanning electron microscopy observations and electron microprobe analyses point to corrosion fatigue as acting surface failure mechanism. The interaction between material and lubricant under complex loading regimes particularly of mixed friction and corrosion opens further failure research areas in the field of tribology.     

矿用立式旋风水膜除尘器除尘性能的试验研究

本文通过对立式旋风水膜除尘器除尘性能的模型试验,揭示了几个主要参数对其除尘性能的影响,确定了合理的取值范围,对该种除尘器的设计和应用提供了依据。     

东海盆地西南部地质特征与油气分布探讨

本文根据近3×10~4km地震和13口探井及其它地球物理、地质等方面资料,综合分析认为:东海盆地西南部与盆地其它部分在发育演化、构造运动、沉积环境等方面差异甚大。 盆地西南部(杭州湾—冲绳岛断裂以南地区)发育演化经历了断陷—坳陷—隆起—铺盖四个阶段。始新世末期的隆起在研究区演化史上有15～20Ma的沉积间断、剥蚀。这段历程,盆地其它部分未曾经历。其次是区内始新世末期抬升运动,致使始新统及以下老地层受剥蚀,仅始新统最大剥蚀量达1000m,这是盆地内绝无仅有的。第三是第三纪以海相沉积环境为主,特别在始新世,为海侵高潮,海城宽阔达8000km~2,这时盆地东北部正接受陆相沉积。研究区中部(北东向)可能存在超压泥岩及多套生油岩系,应为有利生油气区。研究区可能是盆地最有油气远景地区之一。     

20号合成烃航空润滑油应用的研究

对20号合成烃航空润滑油的使用性能，包括粘温性、氧化安定性、金属腐蚀性、金属磨损性以及高空起泡性等进行了研究，表明20号合成烃航空润滑油具有良好的使用性能，聚α-烯烃生产航空润滑油是合理的工艺路线。