有机硅氧烷对硅丙微乳液的影响(英文)

采用种子乳液聚合法引入乙烯基三异丙氧基硅烷(C-1706)改性丙烯酸酯乳液来制备高性能硅丙微乳液。着重探讨了有机硅氧烷单体及其滴加方式对乳液性能的影响,发现引入1.5%的C-1706可将乳液涂膜的硬度提高到7.3,并将其吸水率降低到4.2;且当采用硅氧烷的后滴加方式时,可有效抑制乳液聚合过程中硅氧烷的水解和缩合反应。此外,借助扫描电镜和透射电镜分析聚合产物涂膜形态和共聚乳液的粒径及其分布,结果表明改性后的硅丙微乳液的粒径可控制在50~70 nm之间,C-1706的引入可有效提高微乳液的综合性能。     

The effect of H2 treatment on the activity of activated carbon for the oxidation of organic contaminants in water and the H2O2 decomposition

In this work, hydrogen peroxide reactions, i.e. H₂O₂ decomposition and oxidation of organics in aqueous medium, were studied in the presence of activated carbon. It was observed that the carbon pre-treatment with H₂ at 300, 500, 700 and 800 °C resulted in an increase in activity for both reactions. The carbons were characterized by BET nitrogen adsorption, thermogravimetric analyses (TG), temperature programmed reduction (TPR), electron paramagnetic resonance (EPR), iodometric titration and determination of the acid/basic sites. TPR experiments showed that activated carbon reacts with H₂ at temperatures higher than 400 °C. The treatment produces a slight increase in the surface area. EPR analyses indicate the absence of unpaired electrons in the carbon. Iodometric titrations and TG analyses suggested that the treatment with H₂ generates reduction sites in the carbon structure, with concentration of approximately 0.33, 0.53, 0.59, 0.65 and 0.60 mmol/g for carbons treated at 25, 300, 500, 700 and 800 °C, respectively. It was also observed the appearance of basic sites which might be related to the reduction sites. It is proposed that these reducing sites in the carbon can activate H₂O₂ to generate HO^* radicals which can lead to two competitive reactions, i.e. the hydrogen peroxide decomposition or the oxidation of organics in water.     

聚丙烯球形高效催化剂的工业应用研究

介绍了DQ-2型球形高效催化剂在间歇式液相本体法聚丙烯生产装置上进行工业应用的试验研究，试验证明，该催化剂具有节水、节电、反应平稳且操作时间短等聚合反应特性，催化剂活性平均为42kgPP／(gCat)，一级品率达90％，并与非球型高效催化剂进行了比较。     

经孔板形成旋转流的管壳式换热器壳程传热及流阻的研究

对螺旋折流孔板管壳式换热器壳程的传热与流体阻力做了研究 ,给出换热器壳程传热与流阻的计算关联式 ,并采用实验模型对换热器壳程流体旋转流的阻力系数与传热管的局部传热系数做了测试 ,且对光滑和菱形翅片两种管型作了对比     

Semi‐interpenetrating polymer networks based on polyurethane and polyvinylpyrrolidone. II. Dielectric relaxation and thermal behaviour

Semi‐interpenetrating polymer networks (semi‐IPNs) based on crosslinked polyurethane (PU) and linear polyvinylpyrrolidone (PVP) were synthezised, and their thermal and dynamic mechanical properties and dielectric relaxation behavior were studied to provide insight into their structure, especially according to their composition. The differential scanning calorimetry results showed the glass transitions of the pure components: one glass‐transition temperature (T_g) for PU and two transitions for PVP. Such glass transitions were also present in the semi‐IPNs, whatever their composition. The viscoelastic properties of the semi‐IPNs reflected their thermal behavior; it was shown that the semi‐IPNs presented three distinct dynamic mechanical relaxations related to these three T_g values. Although the temperature position of the PU maximum tan δ of the α‐relaxation was invariable, on the contrary the situation for the two maxima observed for PVP was more complex. Only the maximum of the highest temperature relaxation was shifted to lower temperatures with decreasing PVP content in the semi‐IPNs. In this study, we investigated the molecular mobility of the IPNs by means of dielectric relaxation spectroscopy; six relaxation processes were observed and indexed according the increase in the temperature range: the secondary β‐relaxations related to PU and PVP chains, an α‐relaxation due to the glass–rubber transition of the PU component, two α‐relaxations associated to the glass–rubber transitions of the PVP material, and an ionic conductivity relaxation due to the space charge polarization of PU. The temperature position of the α‐relaxation of PU was invariable in semi‐IPNs, as observed dynamic mechanical analysis measurements. However, the upper α‐relaxation process of PVP shifted to higher temperatures with increasing PVP content in the semi‐IPNs. We concluded that the investigated semi‐IPNs were two‐phase systems with incomplete phase separation and that the content of PVP in the IPNs governed the structure and corresponding properties of such systems through physical interactions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1191–1201, 2003     

Influence of untreated and novel electron‐beam‐modified surface‐coated silica filler on the thermorheological properties of ethylene–octene copolymer

We developed surface‐modified silica fillers by coating these with an acrylate monomer, trimethylolpropane triacrylate, or a silane coupling agent, triethoxyvinyl silane, followed by electron‐beam irradiation at room temperature. These were incorporated in an ethylene–octene copolymer rubber. Thermorheological studies of the unvulcanized ethylene–octene copolymer and its untreated and modified silica‐filled composites were done with a shear dynamic oscillating rheometer. Modification of the silica filler, especially via the silanization process followed by electron beam treatment, significantly reduced filler–filler networking as revealed from the log–log plots of storage modulus and complex shear viscosity, and its real component. The rheological complexity of the compositions was analyzed from a double logarithmic plot of the storage modulus and loss modulus. The results obtained from the master curves constructed on the basis of the time–temperature superposition principle and the activation energy calculated from the Arrhenius equation for the flow of above these compounds further supported these findings. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2453–2459, 2003     

Estimating the electrical conductivity of cement paste pore solutions from OH, K and Na concentrations

A proposed method for estimating the electrical conductivity of cement paste pore solution at 25 °C is based on the concentrations of OH⁻, K⁺ and Na⁺. The approach uses an equation that is a function of the solution ionic strength, and requires a single coefficient for each ionic species. To test the method, the conductivity of solutions containing mixtures of potassium hydroxide and sodium hydroxide with molar ratios of 4:1, 2:1 and 1:1, and having ionic strengths varying from 0.15 to 2.00 mol/l were measured in the laboratory and compared to predicted values. The proposed equation predicts the conductivity of the solutions to within 8% over the concentration range investigated. By comparison, the dilute electrolyte assumption that conductivity is linearly proportional to concentration is in error by 36% at 1 mol/l and in error by 55% at 2 mol/l. The significance and utility of the proposed equation is discussed in the context of predicting ionic transport in cement-based systems.     

Empirical equations for the thermodynamic properties of aqueous sodium chloride

Equations for the thermodynamic properties of aqueous sodium chloride near its vapour pressure are presented. The equations are functions of temperature and concentration, and may be used to estimate aqueous sodium chloride's solubility, density, vapour pressure, specific enthalpy and entropy. They are valid for temperatures from 0 to 300°C, and concentrations extending to saturation with suitable accuracy. The thermodynamic equations are represented graphically and compared with published experimental data. These equations should prove to be a useful tool for modeling desalination equipment, particularly distillation processes.     

流变参数对顺序共注成型芯层熔体最大填充量的影响

基于Hele-Shaw模型，采用有限元数值模拟技术，系统研究了壳层熔体流变指数和零切黏度对顺序共注成型芯层熔体最大填充量的影响规律，并基于流变学理论揭示了其影响机理，最终提出了顺序共注成型芯层熔体最大填充量与壳层熔体流变指数和零切黏度经验关系方程。