MoS_2-LaF_3共溅膜潮湿贮存后的摩擦学性能

本文考察了 MoS_2-LaF_3共溅膜在潮湿空气中贮存后结构及摩擦学性能的变化。结果表明,少量稀土化合物使共溅膜组织更加致密,防止了底材腐蚀,稳定了薄膜结构,MoS_2-LaF_3共溅膜经潮湿贮存后仍具有长的耐磨寿命和稳定的摩擦系数。     

2,5-二巯基-1,3,4-噻二唑的电化学性能

以二硫化碳和水合肼为原料合成了2,5-二巯基-1,3,4-噻二唑(DMcT),并通过元素分析、Raman光谱和红外(IR)光谱对DMcT的结构进行了表征。DMcT的两对氧化还原峰电位差分别为0.96V和1.33V,这表明在室温下氧化还原反应速度很慢。酸碱对DMcT氧化还原反应有很大的影响:加入三乙胺之后,DMcT的氧化反应更加容易,还原峰电流增加,但对还原峰电位影响不大;相反,甲磺酸存在时,DMcT的氧化反应更难进行,而还原反应变得更加容易。     

Thickening and Rheological Properties of Crystalline Polyester Used in Low Pressure Sheet Molding Compounds

Low pressure sheet molding compound (LPMC,1.0-3.0 MPa,95-103 ℃) is a new kind of thermosetting material with crystalline polyester as a physical thickenner.LPMC is different from conventional SMC using an earth oxide thickening agent (e.g.MgO) as chemical thickenner,it relies on the physical thickening of crystalline polyester.Crystalline polyester resin is the key material to mold LPMC parts.Currently there was no report about the thickening mechanism of crystalline polyester in LPMC.In this article,crystalline polyester resins,whose melting points were between 45 ℃ and 89 ℃,were synthesized by a two-step esterification.The melt points of crystalline polyesters are controlled by regulating the mol ratio of the two glycols and the two acids.And by means of varying the content of crystalline polyester resin,the thickening effect on resin paste is investigated.In addition,the thickening mechanism of crystalline polyester in LPMC was investigated by FTIR and DSC analysis.The effects of the diameters and viscosity of crystalline polyester on the rheological property and fiber distribution of LPMC sheets were studied,too.Results show that the thickening effect is excellent when the weight content of crystalline polyester resin is 3%.And there exists three kinds of functions acting in the process of thickening:swelling,hydrogen bonds and induction crystallization.During the preparing process of resin paste in LPMC,the temperature of resin paste must be kept at 90 ℃.In addition,crystalline polyester make LPMC have a perfect fluid property.When the viscosity of LPMC sheet is beyond 1 kPa s,the fiber orientation is not obvious.But when the viscosity of LPMC sheet is about 500 Pa s,the fiber shows a certain degree of orientation.Moreover the study of physical and chemical thickening mechanism of crystalline polyester and the rheological discipline of LPMC sheets in the hot mould will provide the researchers and enterprises with theory guidance.     

Europe should stop taxing innovation

After nearly 48 years of failure to create the EU patent, language issues and the design of a centralised patent-litigation court still dominate headlines. But behind these issues there are high financial stakes and control power to play for. The recent EU Council deal on an ‘enhanced’ European patent system does not solve the above problems, and has not eliminated lingering governance issues. The risk for Europe is that a final patent agreement might be reached that does not cure the system of its major ills, and thus does not bring about any significant improvement for those that need it most: entrepreneurs and innovative companies starting out on the innovation process. The creation of an effective single EU patent requires (i) English-only post-grant translation, (ii) the end of nationally granted patents, (iii) phasing-out of the current ‘European patent’, (iv) lower fees for young innovative companies, and (v) a radical shake-up of the governance of the European Patent Office.     

厚度方向性能Q345EZ35中厚板的开发

介绍了厚度方向性能Q345EZ35中厚板开发的主要技术和关键环节,该中厚板的实物质量符合国家标准要求。     

氧化芋头淀粉理化性质研究

以芋头淀粉为原料、过氧化氢为氧化剂,在碱性介质中制备了低氧化度芋头淀粉。经扫描电镜分析,氧化芋头淀粉颗粒呈多角状,平均颗粒直径18.09μm。X-射线衍射确定其晶体形貌为A型结构。流变学分析其糊化温度为79.5℃、特性粘度为2.505 Pa.s,粘弹性曲线显示其粘性大于弹性。其塑性测定结果符合Croass模型,稠度指数为85.56 s。     

煤制乙二醇技术进展

综述了目前乙二醇生产工艺技术的现状和发展动向,指出了石油乙烯路线是目前乙二醇工业生产的主要工艺。同时,着重介绍了中国科学院福建物质结构研究所与企业合作,率先在国内外实现工业化的煤制乙二醇的成套技术。该技术符合我国缺油、少气、煤炭资源相对丰富的资源特点,可利用煤炭资源生产乙二醇,代替目前的石油乙烯路线,将有效缓解我国乙二醇产品供需矛盾,逐步实现我国以煤代油生产乙二醇的战略目标,节省大量石油资源,对国家的能源和化工产业产生重要积极影响,代表了当今煤化工领域的前沿发展方向之一。     

碳纤维热氧化行为及其机理

对聚丙烯腈(PAN)基碳纤维进行热氧化处理,借助扫描电子显微镜、X射线光电子能谱,拉曼光谱等手段表征了PAN基碳纤维的热氧化行为,研究了其热氧化机理。结果表明:热氧化使PAN基碳纤维表面氧元素含量大幅升高,碳含量下降,氧以C—OH或C—O—C基团的形式吸附到表面、在550℃左右以C=O基团大量分解的形式腐蚀纤维,破坏纤维形貌;同时热氧化腐蚀纤维中的非石墨碳,使得有序的石墨结构向非石墨无序结构转变,破坏碳纤维的晶体结构。     

PP/PA6/APP/OMMT复合材料的湿热老化性能研究

采用熔融挤出插层制备聚丙烯(PP)/尼龙6(PA6)/聚磷酸铵(APP)/有机蒙脱土(OMMT)阻燃复合材料,研究温度80℃、湿度93.1%的湿热老化条件对复合材料性能的影响.结果表明,随着湿热老化时间的延长,复合材料的表面形貌变得很差,产生大量的粗糙白斑.当OMMT含量较低时,复合材料的拉伸强度随湿热老化时间的延长先上升后下降.而当OMMT含量较高时,复合材料的拉伸强度随着湿热老化时间的延长而下降.弯曲强度的变化规律与拉伸强度相似.缺口冲击强度则随着老化时间的延长而提高.引起复合材料破坏的主要原因并非是湿热老化反应导致的分子链断裂,而是复合材料内积聚的水泡和水分子渗入到各相界面引起界面粘结强度下降导致的结果.     

载银/铜NaA分子筛的制备及抗菌性能研究

探讨了液相离子交换法制备载银/铜NaA分子筛抗菌剂的实验条件,并对载银/铜NaA分子筛样品中载银、铜的含量,抗变色性能及对大肠杆菌、金黄葡萄球菌的抗菌性进行检测。结果表明,与单独载银的NaA分子筛相比,载银/铜NaA分子筛中银和铜含量分别达到5.5%和1.6%,色差更小,抗菌性显著提高。