离子交换膜间水的电离及其应用

本文通过分析纯水的电离,讨论了普通电渗析(ED)和填充床电渗析(EDI)中水的电离现象及其相关 机理。EDI过程中水电离产生的H+和OH-离子可以自再生离子交换树脂。文中简单介绍了已得到产业化的EDI 技术和正在推广中的离子交换树脂的电再生技术。     

水泥棒磨机预粉磨技术的增产节能效果

随着水泥工业结构调整，传统的一级圈流短磨水泥粉磨系统已经难以满足高产、优质、低耗的产业政策要求，必须进行必要的技术改造。文章分析了一级圈流磨存在的技术问题及其产生原因，介绍了对其实施增产节能改造的系统工艺技术方案和主机设备的内部结构改造方案。从两个厂的改造实施情况看，技改效果显著。     

Moisture Distribution and Dewatering Efficiency for Wet Materials

This review paper summarizes current research efforts toward a comprehensive view of wet material dewatering, considering the binding energy as the strength to hold water, and rupture energy given to remove moisture from materials.     

Controlled release of insecticide carbaryl from sodium alginate,sodium alginate/gelatin,and sodium alginate/sodium carboxymethyl cellulose blend beads crosslinked with glutaraldehyde

Interpenetrating network polymeric beads of sodium alginate (NaAlg) and its blend with gelatin (gels) or sodium carboxymethyl cellulose (NaCMC) have been prepared by crosslinking with a common crosslinking agent, glutaraldehyde (GA), for the release of insecticide carbaryl (Carb). The prepared beads were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Scanning electron microscopy confirmed the spherical nature and surface morphology of the particles. Bead characteristics, such as carbaryl entrapment efficiency, particle size, equilibrium swelling degree, and carbaryl release kinetics, were determined. The effects of the preparation conditions, such as Carb/NaAlg ratio, time of exposure to GA, blend ratio, and temperature of release medium on the carbaryl release, were investigated for 25 days at 25°C. It was observed that the carbaryl release decreased with increase in crosslinking of network, while it increased with increase in Carb/NaAlg ratio and temperature. The release of carbaryl also increased with increase in Gel or NaCMC content in the blend beads. The highest carbaryl release was found to be 100%, for the beads that were prepared with 1 : 1 NaAlg/Gel at 16 days. The diffusion coefficients have been calculated for the transport of insecticide through the polymeric beads, using initial time approximation method. These values were also consistent with the carbaryl release data. The carbaryl release from most of the bead formulations followed the Fickian trend. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1310–1319, 2006     

Hygrothermal aging of rubber‐modified and mineral‐filled dicyandiamide‐cured DGEBA epoxy resin. III. Dielectric spectroscopy investigation

The effects of moisture absorption on the dielectric properties of a rubber‐modified, mineral‐filled, epoxy resin based on the diglycidyl ether of bisphenol A cured with dicyandiamide are reported. Samples of the resin were aged by immersing in deionized water, or 5% w/w NaCl solution, at elevated temperatures. Dielectric measurements were carried out over the frequency range 10^?1 to 6 × 10⁵ Hz. A featureless dielectric spectrum was observed with both real and imaginary dielectric permittivity increasing with the amount of absorbed water. The change in the dielectric properties with absorption of water was independent of presence of salt, temperature of exposure, and aging history, although a hysteresis of the hydration–dehydration process was observed at low frequencies. Two types of absorbed water were observed—water molecularly dispersed within the epoxy matrix and clustered water in spherical microcavities. The time dependence of the real dielectric permittivity measured at 10 kHz was found to closely resemble that of the water absorption, which allowed the activation energy of diffusion to be calculated from both dielectric and gravimetric data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1011–1024, 2002; DOI 10.1002/app.10368     

凹凸棒粘土用作高水速凝注浆悬浮剂

以凹凸棒粘土作为高水速凝固化充填材料的悬浮稳定剂，考察了不同制浆机械对凹凸棒粘土制浆率的影响。采用高剪切混合乳化机预制的1％凹凸棒粘土浆配制高水速凝固化充填材料甲、已料单浆可获得满意的悬浮稳定效果。其充填体结石抗压强度早期发展迅速，后期持续增长。采用此工艺，注浆料的材料成本仅增加2％。     

Volatile compounds in oils after deep frying or stir frying and subsequent storage

Soybean oil (900 g) was heated by deep frying at 200°C for 1 h with the addition of 0, 50, 100, 150 and 200 mL water, and then stored at 55°C for 26 weeks. Soybean oil, corn oil and lard were heated by stir frying and then stored at 55°C for 30 weeks. The volatiles and peroxide values of these samples were monitored. All samples contained aldehydes as major volatiles. During heating and storage, total volatiles increased 260-1100-fold. However, aldehyde content decreased from 62–87% to 47–67%, while volatile acid content increased from 1–6% to 12–33%; especially hexanoic acid which increased to 26–350 ppm in the oils after the storage period was completed. Water addition to the oils heated by deep frying tended to retard the formation of volatile compounds. The total amount of volatile constituents of lard heated by stir frying increased more during storage than that of corn oil or soybean oil. Peroxide values did not reflect the changes of volatile content in the samples.     

AA-MA共聚物制备工艺对助磨作用影响的研究

采用溶液聚合的方法,制备了丙烯酸(AA)、马来酸酐(MA)聚合物钠盐,系统地研究了单体种类、用量、反应温度、引发剂种类和浓度等助磨剂合成工艺对其助磨效果的影响规律.结果表明:所制备的助磨剂对石英、滑石和锆英石等硬质陶瓷原料具有明显的助磨效果,优于传统的工业助磨剂.较佳的助磨剂制备工艺为:以丙烯酸为单体,过硫酸胺-亚硫酸氢钠为引发剂,MA∶AA=2∶8(wt%);反应温度为65℃;丙烯酸溶液质量百分比浓度为2%;反应时间为4h;引发剂过硫酸胺 亚硫酸氢钠质量百分比为2%.     

On the Predominant Electron-Donicity of Polar Solid Surfaces

The reasons for the predominant electron-donicity of almost all solid polar surfaces and its implications are discussed in this paper. By contact angle or interfacial tension measurements, the electron-accepting as well as the electron-donating properties of polar liquids can be ascertained, through the interplay between their energies of adhesion and cohesion. For the solid-liquid interface, direct interfacial tension measurements are not possible, but indirectly, solid/liquid interfacial tensions of polar systems can be obtained by contact angle measurement. However, as the energy of cohesion of a solid does not influence the contact angle formed by a liquid drop placed upon its surface, one can only measure the solid surface'ks residual polar property, manifested by the energy of adhesion between solid and liquid. This residual polar property is of necessity the dominant component; in most cases this turns out to be its electron donicity. When, by means of contact angle measurements with polar liquids, both electron-accepting and electron-donating potentials are found on a polar solid, it is most likely still partly covered with a polar liquid: usually water. The amount of residual water of hydration of a polar solid follows from its polar (Lewis acid-base) surface tension component (γ^AB). The degree of orientation of the residual water of hydration on a polar solid can be expressed by the ratio of the electron-donating to electron-accepting potentials (γ^⊖/γ^⊕), measured on the hydrated surface.     

聚丙烯酸钾与腐植酸复合高吸水性树脂的合成研究

以腐植酸与丙烯酸聚合制备了高吸水性树脂,讨论了交联剂、引发剂以及KOH用量对聚丙烯酸与腐植酸高吸水性树脂吸水率的影响,结果显示在n(MBA)∶n(AA)=0.0005、n(KPS)∶n(AA)=0.0075、n(KOH)∶n(AA)约为0.70、温度为80℃的条件下合成时,其吸水倍率可达到最优值。而且在接近自然条件下(35℃)失水速度慢,保水时间可达100 h以上,重复吸水性能好。运用红外光谱分析了腐植酸与丙烯酸的反应机理。