15万t/a双甲氨合成联合装置设计

从工艺路线的比较、压力等级的选择、主要设备的选型等方面阐述了双甲氨合成联合装置的设计特点。结合生产运行实践,分析了双甲氨合成工艺路线的运行参数,与采用不同工艺的生产消耗和产品成本进行了对比。结果表明,该工艺吨氨节约成本80元,精醇成本为1112.6元/t,经济效益显著且生产运行稳定。     

离子选择电极法测定陶瓷工业废水的含氟量

本文采用氟离子选择电极法,该法具有测定简便、快速、灵敏、选择性好、可测定浑浊、有色样品等优点,最低检出浓度为0.05mg/L,适用浓度范围宽,在测定含陶瓷工业废水氟量中取得良好效果。     

Potential of microbial growth control in water hydraulic systems by UV‐irradiation and filtration

Water hydraulic systems use water as a pressure medium and, thus, do not pose such adverse environmental impacts as oil hydraulics. Microbial deterioration of the pressure medium and biofouling of the surfaces restrict the applicability of the water‐based technology. The potential of microbial growth control by UV‐irradiation and filtration was studied in a pilot‐scale water hydraulic system. The UV‐irradiation (25 m Ws cm^?2) of the pressure medium reduced the total viable counts of bacteria by 1–2 log₁₀ cfu cm^?3, whereas the total microbial cell numbers and the numbers of surface‐attached microorganisms remained unaffected. Prefiltration (1.2 µm, absolute) of the pressure medium decreased the total microbial cell number in the water phase and retarded the attachment of bacteria. The filtration during the operation (2 µm, absolute) decreased the total numbers of microbial cells and the total viable counts in the pressure medium, and microbial attachment on the surfaces. Microbial attachment was not prevented by filtration. The microbial water quality obtained by pre‐ and on‐line filtration of the pressure medium was sufficient to ensure the long‐term operation of the water hydraulic system assuming that clean work practices are complied with in assembly and during the operation. © 2002 Society of Chemical Industry     

裂缝-溶洞型碳酸盐岩水驱油机理研究现状

裂缝-溶洞型碳酸盐岩的油水两相流动形态复杂,本文针对此类油藏水驱油机理研究做了大量的文献调研,阐述了此类油藏的水驱油机理研究现状,并提出新的试验研究方法和建议,以进一步加深对这类油藏驱油理论的认识。     

全自动污泥脱水离心机的电气控制系统

介绍了采用恒差速恒力矩控制方案克服卧螺离心机处理城市污泥时容易产生的堵料问题,介绍了絮凝剂自动制备和添加装置。     

Reactive surfactants in heterophase polymerization. XVII. Influence of the surfactant on the mechanical properties and hydration of the films

In the context of a European union‐supported network on “Reactive Surfactants for Heterophase Polymerization,” different polymerizable surfactants (surfmers) have been synthesized and engaged in the emulsion polymerization of styrene, butyl acrylate, and acrylic acid. The thermomechanical properties of films cast from these different latices are reported in this article. The evolution of the mechanical properties with temperature and the effect of water molecules on these properties are studied. We observed that the studied surfactants do not influence the properties of the dry films. However, some differences due to grafting of reactive surfactants appeared when the films were wet. The amount of water uptake is drastically decreased when only reactive surfactants are present in the film. Concerning the mechanical behavior of the wet films, a decrease of the plastic flow stress is observed for all the samples whatever the nature of the surfactant (reactive or conventional). Hence, calorimetric measurements and dynamic mechanical analysis are used to identify the possible mechanisms that induce the change in the mechanical behavior of the latex films. In the case of reactive surfactant grafted to the polymer, the very low value of water uptake is accompanied by a plasticization of the polymer. In contrast, no plasticizing effect is observed in the case of nonreactive surfactant, even if the amount of water is very large. Finally, the tensile behavior of the styrene–butyl acrylate copolymer versus temperature is analyzed in the frame of the quasi point defects (qpd) model. Both rubber elasticity and chain orientation effects are taken into account to describe the behavior laws at large extensions (i.e., ? ≈ 1.2). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1686–1700, 2002; DOI 10.1002/app.10548     

淮河流域水资源短缺风险评估与时空分析

根据2003-2013年淮河流域五省的降水量、径流系数、人均水资源量、人均GDP、人口密度等相关数据,构建水资源短缺风险评价体系,用熵权法对指标赋值,运用可变模糊模型对淮河流域及各省的水资源短缺风险进行评估和时空差异分析。结果表明:2003-2013年间淮河流域水资源短缺风险值总体较高,且呈缓慢的增长趋势,2004年降水较少,风险值达到最高;十年间河南省风险增加最为明显,而山东省较为稳定,风险增加也最低;在淮河流域五个区域中,河南省的风险程度最高,达到3.52;江苏省、山东省次之;安徽省和湖北省相对较低,达到2.86和2.51。水资源短缺风险二级指标分析发现,危险性最强的是河南省,安徽省最小;水资源短缺易损性最强的是山东省,湖北省最小;水资源短缺暴露性最强的是江苏省,山东省最小;水资源短缺可恢复性最好的是湖北省,河南省最差。同时,所有评价指标中人口密度、人均GDP、降水量对水资源短缺风险的影响较大。     

基于DPSIR和主成分分析的阜康市水资源承载力评价

针对新疆自治区阜康市水资源日益短缺及生态环境逐渐恶化的现实情况,根据DPSIR框架展开水资源承载力因子分析,构建了水资源承载力多因素基础指标体系;应用主成分分析法筛选出主要指标,采用熵权法进行赋权;构建综合评价模型对水资源承载力进行计算。研究表明:筛选出的4个主成分累计贡献率为92.016%,能充分代表多因素基础指标体系;阜康市九年间(2006年-2014年)水资源承载力综合评分值在0.498~0.531之间波动,下降速率缓慢且波动幅度减小,整体上处于开发饱和阶段。社会和经济发展的压力带来的农业用水的增加是导致水资源承载力下降的主要指标,扩大地下水开采和推行的节水灌溉等压采措施则在很大程度上缓解了下降的趋势。     

利用南水北调工程改善济宁水生态环境的措施

通过对济宁市防治水污染技术研究, 提出水污染防治在政策措施上实施治污抓源头, 杜绝不达标排放; 在城市 建设规划上, 把河湖生态湿地建设、 改善居住生活环境与城市建设有机结合; 在河湖治理上, 坚持工程、 生物措施并 举; 在工程管护上, 坚持依法治水。利用南水北调东线工程建设, 实施水污染防治建设, 通过对济宁市水污染防治成 果的阐释, 为今后水污染治理提供成功的经验和做法。     

许昌市水资源多模式联合调度与合理配置

水资源短缺是制约城市经济社会发展的重要因素,合理配置和有效利用有限的水资源是解决水资源供需矛盾的有效途径。以许昌市国家水生态文明试点城市建设为例,在分析水资源开发利用现状的基础上,运用定额法对需水量进行预测。以多年平均水资源量为基础,2011年作为研究基准年,根据水资源取用方式、工程方案及各种水量需求等,利用MIKE BASIN建立水资源配置模型,对许昌市水资源供需平衡进行模拟,通过三次供需平衡分析,得到不同规划水平年水资源供需配置方案,最终达到水资源供需平衡,使有限的水资源发挥最大效益。研究结果表明,本地水资源结合南水北调、引黄调蓄、中水回用等多模式联合调度,可以满足许昌市中长期经济社会可持续发展用水需求,对未来许昌市水资源可持续利用具有重要的指导意义。