二维圆环结构中弹性波传播的谱单元分析

为研究弹性波在结构中的波场特征,推导建立一种任意四边形二维谱单元,将其应用于二维圆环结构中的波传播行为模拟.以矩形平板结构中弹性导波传播分析为例,通过与传统有限元分析结果对比,验证所建立谱单元的有效性.有裂纹和无裂纹二维圆环结构谱单元模拟结果表明:弹性波在圆环结构中传播会发生频散;圆环结构表面的裂纹对瑞利波的传播影响最大;根据其反射波包位置可以确定损伤位置.     

浅谈葛铺矿综合自动化环网平台建设和使用情况

根据我国当前工业自动化的发展成果、葛铺矿工业环网的建设需求、矿井井下巷道的分布结构和矿井未来发展的需要,从MACH-4002核心交换机的选取到系统VLAN划分方式等方面,综述了葛铺矿综合自动化环网平台的建设方案,并阐述了环网平台的使用情况。     

逆M序列在机抖激光陀螺消除动态闭锁中的应用

对逆M序列在消除激光陀螺动态闭锁误差中的应用进行了研究和验证.目前多采用M序列对抖动的幅度进行调制来消除激光陀螺动态闭锁误差,而逆M序列与M序列相比不仅满足注入到激光陀螺抖动中的要求,且比M序列有其性质等方面优势.通过理论分析及M序列和逆M序列在消除机抖激光陀螺动态闭锁中实验中的应用对比,实验数据表明逆M序列在消除动态闭锁中的作用要优于M序列.     

结合简短可链接环签名的智能合约选举方案

目前一些电子选举协议利用可链接环签名或一次性环签名来保护投票者的隐私,并防止重复投票的情况发生,但签名大小随投票人数的增大而增大,而简短可链接环签名大小始终固定不变,但已有简短可链接环签名算法效率较低。针对这些问题,利用累加器和基于知识证明的签名,构造新的高效的简短可链接环签名,结合匿名地址及星际文件系统,提出一种新的智能合约选举方案,分别设计了选举的创建、投票、计票等阶段的操作。对方案的不可伪造性、可链接性、匿名性、隐私性、公开验证性以及运行效率进行了证明和分析。最后进行了实验仿真评估,结果显示,随着投票者人数的增大,该方案选票的签名大小及Gas消耗保持不变且较少,生成时间及验证时间增长缓慢且较少。     

Deformation due to expanding ring load in modified couple stress thermoelastic diffusion in time and frequency domain

The two-dimensional problem of expanding ring load in a modified couple stress theory of thermoelastic diffusion with heat sources in time and frequency domains is investigated. The mathematical formulation prepared for thermoelastic diffusion solids with one and two relaxation times using Laplace and Hankel transforms. The displacements, stress components, temperature change, and chemical potential are obtained in a transformed domain. Numerical computation is performed for these quantities and the resulting quantities are shown graphically for the time and frequency domains. Comparisons are made with the results predicted by the two theories and different values of time and frequency. Particular cases of interest are also deduced.     

冷拉减面率对C形环用Inconel X-750丝材组织性能的影响

文章通过冷拉拔加工制备减面率为0%、30%、60%的Inconel X-750丝材,分别在650℃、730℃、810℃下时效处理16h,研究冷拉减面率对X-750合金组织性能的影响,特别是减面率对γ′相形状、分布、数量及尺寸的影响。经定量分析,增大冷拉减面率除了有细化晶粒的作用外,还能一定程度地增加γ′相析出的颗粒数量及体积分数,减小γ′相尺寸,进一步加强沉淀强化的作用。时效温度对X-750丝材的晶粒尺寸没有明显影响,对γ′相的数量、尺寸及形状影响较大。采用730℃时效处理16h的标准工艺制备的X-750丝材,经加工为弹簧后制造成金属C形密封环,其回弹量及泄漏率均满足要求,实验条件下密封性能良好。     

Large‐Stroke Electrochemical Carbon Nanotube/Graphene Hybrid Yarn Muscles

Artificial muscles are reported in which reduced graphene oxide (rGO) is trapped in the helical corridors of a carbon nanotube (CNT) yarn. When electrochemically driven in aqueous electrolytes, these coiled CNT/rGO yarn muscles can contract by 8.1%, which is over six times that of the previous results for CNT yarn muscles driven in an inorganic electrolyte (1.3%). They can contract to provide a final stress of over 14 MPa, which is about 40 times that of natural muscles. The hybrid yarn muscle shows a unique catch state, in which 95% of the contraction is retained for 1000 s following charging and subsequent disconnection from the power supply. Hence, they are unlike thermal muscles and natural muscles, which need to consume energy to maintain contraction. Additionally, these muscles can be reversibly cycled while lifting heavy loads.     

Hilbert‐shaped complementary ring resonator and application to enhanced‐performance low pass filter with high selectivity

In this article, a novel single negative metamaterial (MTM) transmission line (TL) consisting of a Hilbert‐shaped complementary ring resonator (H‐CRR) on the ground plane is initially presented and studied in depth. Then based on the proposed MTM TL, a novel six‐section Hi‐Lo microstrip low‐pass filter (LPF) with a cut‐off frequency 2.5 GHz is developed, fabricated, and measured. Measurement results indicate that: by integrating H‐CRR, the selectivity has been significantly improved which is 77.3 dB/GHz due to the single negative permittivity; by etching a crown square on low‐impedance section, the bandwidth characterized by 20 dB return loss was obviously enhanced by 26.2% and the maximal sidelobe level of in‐band return loss was reduced from 22 to 24.6 dB. What' more, the developed LPF achieved a 36.3% size reduction with respect to its conventional counterpart. The design concept, which was confirmed by the measurement data, is of practical value and can be popularized in other microwave devices where high selectivity is requested. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

A current‐mode tunable low‐supply‐voltage ring oscillator

A new circuit topology using a current‐mode low‐pass filter for sinusoids has been presented. The technique is relatively simple, in the proposed circuit, only three identical current‐mode low‐pass filters are connected to each other to realize the small signal path. No external passive components are required except for three capacitors. When compared with LC oscillators, the die area of this work, without inductors, is much smaller. When compared with voltage‐mode ring oscillators, the supply voltage of this work is much lower. As a particular example, a 2.4 GHz, 1.2‐V power supply, 5‐mW sinusoidal oscillator is demonstrated. The oscillation frequency is tuned by the value of that three capacitors, over ～900 MHz, and the tuning range is 37.5%. The phase noise results in ?94 and ?120 dBc/Hz at 1 and 10 MHz from the carrier, respectively. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.