[火用]分析环境模型及其确立原则的研究

对现有的环境模型和有关环境模型的理论进行了评述和分析，指出了确定环境模型的理论以及现有的环境模型中存在的问题，提出了比较系统的确定环境模型的理论原则。     

Adhesive bonding of stainless steel water tubing

The use of an adhesive to bond stainless steel water tubing, allowing stainless steel fittings to be employed, is considered and compared with the more conventional use of compression or capillary copper fittings together with a soft solder. Tests carried out to determine environmental effects on adhesively bonded stainless steel tubing suitable for domestic water supply, and the strengths of these joints, are described. It has been found that acrylic anaerobic adhesives are suitable for bonding tubing carrying cold water, the joints attaining superior strength to the copper-soldered ones; a reasonable degree of flexing can also be tolerated. It would appear that certain selected adhesives may also be used in joints carrying hot water.     

关于控制氯代烃的政策选择

本文分析了氯代烃的生产所引起的环境问题,并提出了减少氯代烃环境影响的政策选择的基本原则。     

The influence of branch length on the deformation and microstructure of polyethylene

The length and number of side chain branches have a profound influence on the microstructure and physical properties of polyethylene (PE). For a series of linear PE copolymers: environmental stress cracking resistance (ESCR), melting points, creep resistance and modulus, and equilibrium spherulite size were all found to increase with increasing branch length (methyl to hexyl) at a given density and molecular weight. It is proposed that (at a fixed molecular weight) branch length and branch concentration determine spherulite size and, consequently, spherulitic boundary areas, in which the dry crazing/voiding occurs during the incubation period of environmental stress cracking (ESC). At a fixed density, decreased spherulite size contributes to greater spherulite boundary slip and increased creep at low (less than 2 MPa) stresses.     

A note on pressure drop for the cross-flow of power-law liquids and air/power law liquid mixtures past a bundle of circular rods

The steady flow of non-Newtonian polymer solutions on their own and together with air transverse to a bundle of circular rods, has been studied experimentally. In particular, the frictional pressure drop has been measured as a function of non-Newtonian power-law constants, flow rates, voidage of bundles and the input fraction of air over wide ranges of conditions as: power-law flow behaviour index, 0.5 to 1; voidage values of 0.78 and 0.87-0.88; air velocity (superficial), 0.09 to 0.28 m/s and liquid velocity (superficial) 0.018 to 0.5 m/s. While the single phase flow results for power-law liquids are in excellent agreement with an existing equation, the two-phase pressure drop results are also in accordance with the form of the well-known Lockhart-Martinelli correlation. Based on these results, it is suggested that a value of 5-10 for the Reynolds number based on rod diameter marks the limit of the laminar flow in such systems.     

鄱阳湖流域生态系统管理框架

鄱阳湖流域内水环境污染、水土流失、土地退化、自然灾害、矿区生态环境破坏等重大生态环境问题,不仅影响长江中下游的生态环境,同时制约流域内社会经济的发展。因此,亟须实行鄱阳湖流域生态系统管理,更好地协调流域内河流上下游、河湖以及行政区域之间的环境保护与社会经济发展关系。在对鄱阳湖流域特征分析和综合管理回顾的基础上,探讨鄱阳湖流域生态系统管理框架,分析鄱阳湖流域生态系统管理的尺度和范围、生态系统服务可持续利用、适应性管理等问题,提出鄱阳湖流域生态系统管理目标,为鄱阳湖生态经济区建设以及流域开发与保护提供理论依据和指导。     

应变空间中一般加载规律的弹塑性本构关系

为了建立多维应力、应变空间的弹塑性本构关系,将一般加载规律一维全量理论的简单弹塑性模型推广到一般加载规律的多维增量理论,并且给出应力空间的加载函数和应变空间的加载函数以及它们之间的正确的变换关系.在此基础上,在应变空间中建立了推导一般加载规律的多维增量理论的本构关系的一种途径.应用这种途径,从应变空间的加载函数出发,推导了等向强化材料的一般加载规律的弹塑性本构关系.理论和实例表明,这种途径对等向强化材料、随动强化材料、理想弹塑性材料和热弹塑性问题都适用.     

A new model for evaluating the electrical conductivity of nonferrous slag

Electrical conductivity of molten slag is an important physicochemical property for designing the refining process in electric smelting furnaces.Though conductivities of many slag systems have been measured,the quantitative relationships of conductivity with slag composition and temperature are still very limited.In this article,the Arrhenius law was used to describe the experimental data of conductivities for CaO-MgO-Al2O3-SiO2,CaO-Al2O3-SiO2,CaO-MnO-Al2O3-SiO2,as well as CaO-MgO-MnO-Al2O3-SiO2 systems,and...     

Average cluster sizes and cluster size distributions of superfine nickel particles in light media

Effects of shear rates on average cluster sizes (ACSs) and cluster size distributions (CSDs) in uni- and bi-systems of partly charged superfine nickel particles were investigated by Brownian dynamics, and clustering properties in these systems were compared with those in non-polar systems. The results show that the ACSs in bi-polar systems are larger than those in the non-polar systems. In uni-polar systems the behavior of clustering property differs: at the lower ionic concentration (10%), repulsive force is not strong enough to break clusters, but may greatly weaken them. The clusters are eventually cracked into smaller ones only when concentration of uni-polar charged particles is large enough. In this work, the ionic concentration is 20%. The relationship between ACS and shear rates follows power law in a exponent range of 0.176–0.276. This range is in a good agreement with the range of experimental data, but it is biased towards the lower limit slightly. Foundation item: Projects(50474037, 50874087) supported by the National Natural Science Foundation of China; Project (BK2006078) supported by the Natural Scientific Funds of Jiangsu Province, China     

考虑冷变形加工硬化的翻边力理论计算

在分析现有计算公式存在不足的基础上,根据翻边变形区材料的应力应变特点,考虑了冷变形加工硬化(取幂函数硬化规律)和变形区材料厚度变化(翻边为变薄)两个因素的影响,利用金属塑性成形问题求解理论中的主应力法,推导和提出了圆孔翻边力计算的一个新公式.通过用钢板(SPCC)和铜板(T1)进行了翻边工艺试验的验证,并与经验公式和现有理论公式的计算结果进行了比较,表明新公式计算结果能接近于实际,且原理上更为科学合理.