酸、碱溶液对脱脂蚕蛹的解剖结构影响

将脱脂蚕蛹分别置于清水、1%盐酸溶液和1%氢氧化钠溶液中,100℃浸泡处理20 min,采用电子光学显微分析技术观察脱脂蚕蛹的解剖结构。结果表明:①清水浸泡,蛋白质、甲壳素膨胀;②盐酸溶液浸泡,在蛋白质、甲壳素膨胀的同时,有蛋白的部分分解;③氢氧化钠溶液浸泡,蛋白质、甲壳素膨胀,蛋白质溶解,并伴有部分蛋白的分解。碱对蛋白层与甲壳层的层间有劈开作用。碱液能实现蛋白层与甲壳层的剥离。     

Association of seed size with genotypic variation in the chemical constituents of soybeans

Ten soybean genotypes grown in 1992 with seed size ranging from 7.6 to 30.3 g/100 seeds and maturity group V or VI were selected and tested for oil and protein content and for fatty acid composition. In these germplasm, protein varied from 39.5 to 50.2%, oil, 16.3 to 21.6%, and protein plus oil, 59.7 to 67.5%. Percentages of individual fatty acids relative to total fatty acids varied as follows: palmitic, 11.0 to 12.8; stearic, 3.2 to 4.7; oleic, 17.6 to 24.2; linoleic, 51.1 to 56.3 and linolenic, 6.9 to 10.0. Seed size showed no significant correlations with individual saturated fatty acids, protein or oil content. However, significant correlations were found between seed size and individual unsaturated fatty acids: positive with oleic, and negative with linoleic and linolenic. Oil and protein content were negatively correlated with each other. Among the major fatty acids, only the unsaturated were significantly correlated with each other: negative between oleic and linoleic or linolenic, and positive between linoleic and linolenic. A subsequent study with soybeans grown in 1993 generally confirmed these findings. Variation in relative percentages of unsaturated fatty acids andr values for most pairs of relationships were even higher than those obtained from the 1992 crop. Presented at the 85th AOCS Annual Meeting and Expo, Atlanta, Georgia, May 8–12, 1994.     

长春新碱治疗糖尿病肾病大鼠的实验研究

目的验证长春新碱对糖尿病肾病大鼠的治疗作用。方法用链脲佐菌素(STZ)诱导大鼠糖尿病模型。将模型大鼠分为治疗组与非治疗组,治疗组给予长春新碱(VCR)0.2 mg/kg,尾静脉注射,每周2次,观察给药后大鼠血糖、尿蛋白、肾功能、肾重,体重等值的改变以及肾脏病理的改善情况。结果 治疗组大鼠尿蛋白明显减少,肾重/体重低于非治疗组。光镜下观察治疗组肾脏病理学变化情况有明显改善。结论长春新碱可降低糖尿病肾病大鼠的尿蛋白并改善糖尿病肾病早期病理损害。     

The influence of Glu44 and Glu56 of cytochrome b5 on the protein structure and interaction with cytochrome c

The gene encoding trypsin-solubilized bovine liver microsomalcytochrome b₅ (82 residues in length) has been mutated, in whichthe codons of Glu44 and Glu56 were changed to those of Ala.The mutated genes were expressed in Escherichia coli successfullyand three mutant proteins (E44A, E56A and E44/56A) were obtained.The UV-visible, CD and ¹H NMR spectra of proteins have beenstudied. The results show that the mutagenesis at surface residuesdoes not alter the secondary and tertiary structures of cytochromeb₅ significantly. The interactions between recombinant cytochromeb₅ and its mutants with cytochrome c were studied by using opticaldifference spectra. The results demonstrated that both Glu44and Glu56 of cytochrome b₅ participate in the formation of acomplex between cytochrome b₅ and cytochrome c.     

妊娠相关血浆蛋白A的分离及纯化

采用人胎盘血为原料,利用Sephadex G-200,DEAE-Sephadex A-50层析,Sepharose 4B反相免疫亲和层析技术,获得妊娠相关血浆蛋白A(PAPP-A)纯品,经8.0％聚丙烯酰胺凝胶电泳、免疫电泳、双向免疫扩散证明,所提取的PAPP-A纯品为单一成分。免疫家兔获得抗血清,其效价在1:16以上。     

Chromatographic performance of monodisperse–macroporous particles produced by “modified seeded polymerization.” I: Effect of monomer/seed latex ratio

In this study, the monodisperse–macroporous particles produced by a relatively new polymerization protocol, the so‐called, “modified seeded polymerization,” were used as column‐packing material in the reversed phase chromatography (RPC) of proteins. The particles were synthesized in the form of styrene‐divinylbenzene copolymer approximately 7.5 μm in size. In the first stage of the synthesis, the monodisperse polystyrene particles 4.4 μm in size were obtained by dispersion polymerization and used as the “seed latex.” The seed particles were swollen by a low‐molecular‐weight organic agent and then by a monomer mixture. The monodisperse–macroporous particles were obtained by the polymerization of monomer mixture in the seed particles. In the proposed polymerization protocol, the number of successive swelling stages was reduced with respect to the present techniques by the use of sufficiently large particles with an appropriate average molecular weight as the seed latex. A series of particles with different porosity properties was obtained by varying the monomer/seed latex ratio. The separation behavior of HPLC columns including the produced particles as packing material was investigated in the RPC mode using a protein mixture including albumin, lysozyme, cytochrome c, and ribonuclease A. The chromatograms were obtained with different flow rates under an acetonitrile–water gradient. The theoretical plate number increased and chromatograms with higher resolutions were obtained with the particles produced by using a lower monomer/seed latex ratio. The separation ability of the column could be protected over a wide range of flow rates (i.e., 0.5–3 mL/min) with most of the materials tested. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 607–618, 2004     

Polarity as a criterion in protein design

Hypothetical proteins can be tested computationally by determiningwhether or not the designed sequence-structure pair has thecharacteristics of a typical globular protein. We have developedsuch a test by deriving quantities with approximately constantvalue for all globular proteins, based on empirical analysisof the exposed and buried surfaces of 128 structurally knownproteins. The characteristic quantities that best appear tosegregate badly designed or deliberately misfolded proteinsfrom their properly folded natural relatives are the polar fractionof side chains on the protein surface and, independently, inthe protein interior. Three of the seven hypothetical structurestested here can be rejected as having too many polar side-chaingroups in the interior or too few on the protein surface. Inaddition, a recently designed nutritional protein is identifiedas being very much unlike globular proteins. These database-derivedcharacteristic quantities are useful in screening designed proteinsprior to experiment and may be useful in screening experimentallydetermined (X-ray, NMR) protein structures for possible errors.     

An evaluation of the performance of an automated procedure for comparative modelling of protein tertiary structure

A 3-D model of a protein can be constructed from its amino acidsequence and the 3-D structures of one or more homologues byannealing three sets of fragments: the structurally conservedregions, structurally variable regions and the side chains.The method encoded in the computer program COMPOSER was assessedby generating 3-D models of eight proteins whose crystal structuresare already known and for which 3-D structures of homologuesare available. In the structurally conserved regions, differencesbetween modelled and X-ray structures are smaller than the differencesbetween the X-ray structures of the modelled protein and thehomologues used to build the model. When several homologuesare used, the contributions of the known structures are weighted,preferably by the square of sequence similarity; this is especiallyimportant when the similarities of the homologues to the modelledstructure differ greatly. The ‘collar’ extensionapproach, in which a similar region of different length in ahomologue is used to extend the framework, can result in a moreaccurate model. If known homologues comprise more than one relatedgroup of proteins and they are both distantly related to theunknown, then alignment of the sequence to be modelled witheach group of homologues facilitates identification of structurallyconserved regions of the unknown and leads to an improved model.Models have root mean square differences (r.m.s.d.s) with thestructures defined by X-ray analysis of between 0.73 and 1.56Å for all C atoms, for seven of the eight models. Forthe model of mucor pepsin, where the closest homologue has 33%sequence identity and 20% of the residues are in structurallyvariable regions, the r.m.s.d. for the framework region is 1.71Å and the r.m.s.d. for all C atoms is 3.47 Â.     

蛋白质在超滤过程中的膜污染和膜清洗

本文选用四种不同的膜清洗剂对牛血清蛋白溶液超滤后污染的三种超滤膜进行研究，结果表明：在蛋白质的等电点取得在不同ＰＨ值下蛋白质对膜污染的最佳清洗效果，清洗效率与蛋白质的所荷电荷有关。采用适宜的清洗过程将会延长膜使用寿命和增强超滤膜性能。