预应力混凝土箱梁主要裂缝成因和防治措施的探讨

预应力混凝土连续箱梁的裂缝问题一直以来倍受桥梁界专家及技术人员的关注。本文通过对预应力混凝土连续箱梁主要裂缝产生的原因进行了浅析，并提出了相应的防治的措施。     

The use of natural essential oils as antimicrobial solutions in paper packaging. Part II

We have assessed the antimicrobial, vapor-phase activity of the following natural essential oils (EOs) when used in paraffin-based “active coatings” for paper packaging materials intended to come into contact with foods: clove (Sygzium aromaticum), cinnamon (Cinnamomum zeylanicum), and oregano (Origanum vulgare) EOs, and cinnamaldehyde-enriched cinnamon EO. To our knowledge, this is the first time that such an approach has been presented for consideration by the scientific community.     

用高梯度磁场净化轧钢废水

通过用高梯度磁场处理热轧厂废水的试验,得到了在试验条件下浊度(水中不溶物的含量)和铁的去除率,确定了最佳净化条件.在此条件下,能够有效去除废水中的不溶物和铁,经过处理的水质达到了工艺循环水的水质标准.     

Influence of Storage Time and Temperature on Absorption of Flavor Compounds from Solutions by Plastic Packaging Materials

ABSTRACT: Linear low-density polyethylene (LLDPE), oriented polypropylene (OPP), polycarbonate (PC), polyethylene terephthalate (PET film and PET bottle), and polyethylene naphthalate (PEN) were stored in a model solution containing 10 flavor compounds at 4, 20, and 40 °C and flavor absorption by the plastic materials was followed in time. The absorption rate and/or total amount absorbed increased considerably with temperature from 4 to 40 °C. Depending on storage temperature, total flavor absorption by the polyolefins (LLDPE and OPP) was 3 to 2400 times higher than by the polyesters (PC, PET, and PEN). Therefore, in the factor of flavor absorption, polyesters are preferred over polyolefins as packaging material.     

实体造型及其二维图形转换技术在包装机械设计中的应用

介绍运用AutoCAD进行实体造型，再将其转换为二维图形，从而获得零件图的方法，该方法可以显著提高包装机械的设计效率。     

电子封装用金属基复合材料的制备

分析了电子封装用金属基复合材料的性能特点及其对制备工艺的要求，在此基础上论述了该种材料的各种制备工艺的特点及发展现状。     

低碳钢热浸Zn-0.15%Ni合金镀层组织及第二相粒子

采用热浸Zn-Ni合金镀锌方法，在含0.03%-0.36%Si的低碳钢上获得Zn-Ni合金镀层，研究了镀浴中Ni含量和钢中Si含量对镀层中δ相和ζ相生长速率的影响，以及Zn-Ni合金镀层η相中的第二相粒子即Zn-Fe-Ni三元化合物Γ2相粒子的形成和长大过程，结果表明，在Zn-0.15%Ni镀浴中，含硅0.03%-0.215%钢镀层的ζ相明显受到抑制，δ相厚度略有增加，Γ2相粒子的形成和长大过程包括ζ相的溶解，Γ2相的形核和成比例吸收铁，镍而长大。     

1999年三峡大坝混凝土温控防裂研究与实践

1999年，为三峡工程二期施工阶段由开挖为主转入混凝土浇筑高峰期的关键一年，面临混凝土浇筑强度高、进度紧、温控设计要求严、高温季节浇筑基础约束区混凝土和施工设备投产晚的严峻局面。长江委设计院对1999年高温季节浇筑大坝基础约束区混凝土进行了专题研究。通过对大坝温度应力仿真研究和夏季各种温控措施效果分析，提出了夏季浇筑基础约束区混凝土的综合温控防裂措施。通过三峡工程参建各方共同努力，全面实施综合温控防裂措施，达到了预期效果，避免了大坝基础约束区产生危害性贯穿裂缝，并为顺利完成混凝土年度计划和形象面貌创造了有利条件。     

Stability of Standard Electrolytic Conductivity Solutions in Glass Containers

The stability of solutions having an electrolytic conductivity, κ, of 5 μS/cm to 100 000 μS/cm packaged in glass screw-cap bottles, glass serum bottles, and glass ampoules was monitored for 1 year to 2 years. The conductivity was determined by measuring the ac resistance of the solution. Mass loss was also monitored for solutions packaged in bottles. The solutions were prepared using KCl in water (κ ≥100 μS/cm) or KCl in 30 % (by mass) n-propanol 70 % (by mass) water (κ ≤ 15 μS/cm). The conductivity changes were compared by packaging type and by nominal κ. The main causes of the κ changes are evaporation (screw-cap bottles) and leaching (screw-cap bottles, serum bottles, and ampoules). Evaporation is determined from mass loss data; leaching occurs from the glass container with no change in mass. The choice of optimal packaging, which depends on the conductivity level, is the packaging in which κ changes the least with time. Ampoules are the most suitable packaging for standards having nominal κ values of 500 μS/cm to 100 000 μS/cm. Screw-cap bottles are most suitable for standards having a nominal κ of 5 μS/cm to 100 μS/cm.     

多烟管燃气开水炉的结构与应用

小型燃气 (或其它燃料 )开水炉是许多工厂、机关等公共场所必备的饮水设备。目前市场上多数这种类型的炉子热效率较低。根据本单位设计的容水量为 5 0 0kg燃气开水炉的设计测试及使用情况 ,剖析了多烟管开水炉的结构及热工参数。总结了该炉成功的经验及尚需解决的问题 ,对于提高该类型炉子热效率及使用寿命 ,具有一定的借鉴作用