Optimal task allocation in hypercube multiprocessor ensembles

Criteria are established to determine the optimal policy for allocating a set of uniform tasks onto a multiprocessor hypercube ensemble. It is shown that the optimal policy depends on the ratio of computation to intertask communication required by the distributed program, and that based on this ratio, tasks should be placed either all on one processor or uniformly distributed over the largest possible hypercube.     

Partial scan design and test sequence generation based on reduced scan shift method

This paper presents a partial scan algorithm, calledPARES (PartialscanAlgorithm based onREduced Scan shift), for designing partial scan circuits. PARES is based on the reduced scan shift that has been previously proposed for generating short test sequences for full scan circuits. In the reduced scan shift method, one determines proch FFs must be controlled and observed for each test vector. According to the results of similar analysis, PARES selects these FFs that must be controlled or observed for a large number of test vectors, as scanned FFs. Short test sequences are generated by reducing scan shift operations using a static test compaction method. To minimize the loss of fault coverage, the order of test vectors is so determined that the unscanned FFs are in the state required by the next test vector. If there are any faults undetected yet by a test sequence derived from the test vectors, then PARES uses a sequential circuit test generator to detect the faults. Experimental results for ISCAS'89 benchmark circuits are given to demonstrate the effectiveness of PARES.     

集群移动通信系统的组网设计

本文对集群移动通信系统在组网设计时应考虑的问题进行了分析，并提出了具体步骤和方法，可供集群系统组网设计时参考。     

锥形有源条半导体光放大器增益和饱和特性分析

以行波半导体光放大器速度方程为基础，采用传输矩阵方法，对锥形结构半导体光放大器的增益和饱和特性进行理论研究。讨论了不同锥形长度，不同结构时的增益和饱和特性差异。理论研究表明，锥形结构能改善半导体光放大器的偏振灵敏度。在同一锥度下，长锥形长度能提高饱和增益，降低偏振度。在进行半导体光放大器有源条结构设计时要综合考虑锥度及锥形长度的影响，以实现结构优化 。     

面向大规模定制的虚拟设计研究

综述了大规模定制的范围经济性和面向大规模定制的基本设计方法，并提出了一个虚拟设计框架，该框架改变了传统的设计模式，利用先进的设计方法学和仿真支撑技术为产品开发提供了最大柔性和敏捷性。同时，它提供了一个多学科合作的设计环境，用户直接参与进设计循环中。最后，结合新型剑杆织机的开发，展示了一个能够支持新产品快速成功开发的虚拟设计环境。     

Optoelectronics in satellite designs

Design of artificial satellites for communication, remote sensing and scientific investigations follows, at present, a fixed pattern based on existing and proven technologies and the requirements of payload or experiment within the constraints of weight, volume and power available. The advances in optoelectronic components and systems have opened up a new dimension in designing satellites of the future, incorporating new technologies. This paper deals with general satellite design concepts based on optoelectronic systems wherever applicable.     

多功能键盘设计

文中讨论的是多功能键盘，它是以ＡＴ８９Ｃ２０５１单片机为控制器，带有本地键盘和远程无线遥控键盘，适用于特殊场合的一种微机系统智能键盘。文中较详细地介绍了多功能键盘的设计思想、工作原理及软件控制过程等。     

Rank order filters and priority queues

Summary A derivation of a parallel algorithm for rank order filtering is presented. Both derivation and result differ from earlier designs: the derivations are less complicated and the result allows a number of different implementations. The same derivation is used to design a collection of priority queues. Both filters and priority queues are highly efficient: they have constant response time and small latency. Anne Kaldewaij received an M.Sc. degree in Mathematics from the University of Utrecht (The Netherlands) and a Ph.D. degree in Computing Science from the Eindhoven University of Technology. Currently, he is associate professor in Computing Science at Eindhoven University. His research includes parallel programming and the design of algorithms and data structures. He enjoys teaching and he has written a number of textbooks on mathematics and programming. Jan Tijmen Udding received an M.Sc. degree in Mathematics in 1980 and a Ph.D. degree in Computing Science in 1984 from Eindhoven University of Technology. Currently, he is associate professor at Groningen University. His main research interests are mathematical aspects of VLSI, program derivation and correctness, and functional programming.     

层状催化剂颗粒的优化设计——双组分等温平行反应体系

针对双组分等温平行反应体系,分析讨论了以提高催化剂活性和选择性为目标时催化剂活性组分的最优分布形式(为δ-函数分布),并给出了确定这种反应体系的催化剂的最佳活性层位置的计算方法。结果表明:以提高选择性为目标的最佳活性层位置比以提高活性为目标的要更靠近催化剂核心,实用的最优位置应介于二者之间。最后,本文还研究了反应动力学级数、本性选择性以及内扩散模数(Thiele 模数)等因素对最佳活性层位置的影响。     

Formal methods: The next generation of system design tools

Because of the growing demand for increasingly complex computer-based systems there is now an urgent need to provide tools to assist during the design of such systems. Formal specifications and formal methods provide such assistance but their widespread adoption has been hindered by the so-called ‘math fear’ and the perception that the tools are too difficult, too time consuming and too costly to use in a commercial environment. The aim of this article is to dispel the mystery surrounding the topic and to explain what formal methods are, how and why they are used, the benefits that accrue and why the technology should be accepted on a broader front. The application of formal methods to the design of computer-based systems will be discussed without resorting to jargon or mathematics. The discussion will concentrate more on the software content of systems but the arguments apply equally well to hardware. Some of the available tools will also be introduced.