非AWGN环境下调制类型自动识别

在非AWGN环境下，针对CW，AM，FM，OOK，PSK，QPSK，16QAM，FSK，MSK，SSB十种混合调制信号，对调制类型特征提取方法和自动识别算法进行了分析、综合、设计和计算机仿真。提出了梯层电平分析方法、频率瞬时信号分析、剔除载波的归一化能量分析、平方后信号的频谱分析、四次方后的信号频谱分析等方法。当SNR=10dB时，计算机仿真结果是正确识别率不低于95％，自动识别的平均处理时间为不超过10s。     

优化锰铁高炉配矿结构

介绍了通过优化高炉锰铁烧结矿原料结构，改善了烧结矿性能，使锰铁冶炼取得了增产、节焦、降成本的明显效果。     

工业化陶瓷超滤膜的表征

以液-液排除法测定工业化陶瓷超滤膜的孔径及孔径分布，比较了两种渗透体系对测定结果的影响；用已知分子量标准物质考察了不同膜的截留行为，获得了各膜的切割分子量值，并分析了截留率与孔径的对应关系，为工业化陶瓷膜的开发提供依据。     

Catalyst instabilities during the liquid phase partial oxidation of methane

A promising catalytic system for the low temperature oxidation of methane to a methanol derivative has been investigated under both batch and semi-continuous operation in two different reactor types. The system comprises of a bimetallic palladium and copper(II) chloride catalyst contained in a trifluoroacetic acid (TFA) and an aqueous phase. Methane, oxygen and a co-reductant carbon monoxide constitute the gas phase. Typical operating conditions were a temperature of 85 °C and a pressure of 83 bar.

The yields of the methyl trifluoroacetate product observed in this present work were less than those obtained in other batch autoclave works, which employed only 4 ml of liquid phase, compared with 50 ml in this study. Furthermore, an encouraging initial product formation rate of ca. 40 mol/m³ h, quickly decreased after the first hour, and came to an apparent end after only 2 h. This observation had not been reported previously.

Work performed in a semi-continuous porous tube reactor (300 ml of re-circulating liquid phase) also showed the same reaction characteristics as in the batch reactor. Thus, the deteriorating product formation rate cannot be attributed to gaseous reactant depletion (batch operation). The results suggest problems associated with catalyst instabilities, e.g. with the previously elucidated Wacker chemistry.     

多模复合制导数据融合器性能评估系统方案设计

从构建多模复合制导数据融合器性能评估系统的需求出发，详细介绍了多模复合制导数据融合器性能评估系统的构建方案，并从软硬件两个方面介绍了构建这样一个系统所需要注意的问题和解决办法．     

多组分间歇精馏工艺计算探讨

介绍用“微元时段”计算多组分间歇精馏的方法。     

原料酸卸车系统技术改进分析

分析了酸卸车系统存在的泵与管路的匹配、鹤管真空损失、酸腐蚀等技术问题，提出了鹤管的改进、卸车泵更新、真空系统水封、管路系统改进等保证真空能力的具体措施，实现了全自动、密闭卸车作业，最大限度地满足安全、快卸、底料少的要求。     

实施分销库管理的一些做法

介绍了中国石化山西阳泉石油分公司实施市县石油公司一体化管理体制的工作经验。其具体做法是：采取措施使思想、业务流程和服务与之接轨，开展创省级“青年文明号”活动和加强企业文化建设；实施两级绩效考核，工资与油品吞吐量挂钩；坚持以人为本，长短结合，立足基础，整体提升；用抓好培训、责任和制度的落实及监管，来强化基础管理的效果。     

南水北调中线水源工程的突变多准则评价

应用突变多准则评价法对南水北调中线水源工程项目的多方案比选作出评价决策。该方法为专家决策系统提供一种数学方法 ,以便用计算机实现多目标、多层次、多方案的评价决策。     

超声珩磨在发动机缸套光整加工中的应用研究

本文介绍了发动机缸套的新型加工工艺-功率超声珩磨的原理。特点，装置组成。关键技术，工艺效果以及其应用前景。