高炉鼓风机就地扩容改造方案及经济效益

介绍了利用高炉鼓风机基础实施不易地扩容改造的设计工艺方法，该方法不仅降低了设计、施工、安装费用，而且缩短了施工周期，降低了固定资产投资。     

Recent developments of high-performance NEOMAX magnets

For further improvement in achieving extremely high magnetic properties of Nd- Fe- B sintered magnets, extensive investigation has been done to densify the magnet up to the theoretical value, to increase the volume fraction of the Nd ₂Fe₁₄B matrix phase, and to achieve a high degree of alignment. By controlling chemical composition and the amount of constituent phases,improving particle size distribution, and adopting the isostatic pressing method to get better alignment of fine particles, we have succeeded in obtaining a high-performance magnet having residual flux density (B_r) of 1.495 T (14.95 kG), maximum energy product [(BH)_max] of 431 kj/m³ (54.2 MGOe), and intrinsic coercivity (iH_c) of 845 kA/m (10.62 kOe).     

Influence of melt superheat on breakup process of close-coupled gas atomization

In close-coupled gas atomization（CCGA）, the influences of melt superheat on breakup process are fundamental to obtain desired or finer powder. Based on a series of Cu atomization experiment under different superheating conditions, the influences of melt superheat on breakup process were studied. Experimental results indicate that as the melt superheat is increased to 150, 200, 250 and 300 K, the mean particle size （D50） decreases consequently to 34.9, 32.3, 30.9 and 19.7 μm. Theoretical analysis reveals that the primary breakup and secondary breakup processes are close coupled, and the melt superheat radically influences the melt properties, and plays a crucial role on governing the filming process of primary breakup and the atomization modes of secondary breakup. There exists a strong nonlinear decrease of contact angle of melt to nozzle orifice wall when the superheat is increased fi＇om 250 K to 300 K, leading to a marked fall of the film thickness formed in primary breakup, and D50 of copper powders is therefore sharply reduced. However, the log-normal distribution feature of particle size has not been substantially improved.     

A new method of characterization for stratified thermal energy stores

A new method for characterization of stratified thermal energy stores (TES) that integrates both the first law and the second law concerns is presented here. The first law concern is incorporated into a quantity called energy response factor and the second law concern into an entropy generation ratio. A product of these two quantities is at the heart of the TES efficiency definitions. This approach removes the overemphasis of the existing methods either on the first or the second law of thermodynamics which often biases the characterization results. The information about the evolution of the temperature field of the system in time is the prerequisite of the new method. It may be obtained from experiments or from suitable numerical simulations. The current method can be easily integrated into computational fluid dynamic (CFD) simulations and thus facilitate CFD-based design analysis. As an example of such CFD-integrated analysis, a large-scale hot water seasonal heat store is numerically studied to identify the effects of aspect ratio, containment shape, internal structures, and containment size on their efficiency. The results suggest the effectiveness of the new method in deriving useful design insights.     

THE RELATIONSHIP BETWEEN HAZE AND THE SIZE OF PARTICLES IN BEER

Haze measurements have been obtained for suspensions of polystyrenelatex particles of known diameter using two light scattering instruments which measure at angles of 90° and 13° respectively. The results agree well with the theory of light scattering and demonstrate the significant effects of particle size and angle of detection upon the instrumental values for haze. This information has been used to correlate the particle size distributions of a number of beers, as measured by Coulter Counter, with the corresponding, measured haze values.     

Breaking of structural dormancy in seeds of Tetrapleura tetraptera by Aspergillus niger

Aspergillus niger (strain UUF9202) significantly reduced the dormancy period and boosted aggregate germination percentage (AGP) in seeds of Tetrapleura tetraptera. A net reduction in mean germination time (MGT) to 12 days and an increase from 0 to 42% AGP were obtained in 32 days. The optimal spore inoculum of the fungus was 8.5 × 10≥10 ml^?1 per 100 seeds in 96 h pregermination incubation. The potential of some physical factors in combination with this fungal concentration in enhancing AGP was evaluated. The treatments were as follows: (i) hot water scarification at 30°C, 50°C, 80°C and 100°C plus A niger; and (ii) nicking by decoating at either the micropylar or chalazal ends plus A niger. Micropylar scarification plus A niger gave the highest AGP (94%) followed by chalazal scarification plus A niger (86%) and hot water dip at 80°C + A niger (82%). The control seeds which were soaked in presterilised (by autoclaving at 121°C for 15 min) A niger spore suspension at 30°C gave zero germination.     

回转体拉深件毛坯直径的简捷计算及误差分析

通用的回转体拉深件毛坯直径的计算公式繁琐，不蝗记忆，特别是利用中线尺寸常出现小数点使计算复杂，本文针对此问题分别推导出了利用中线尺寸和不用中线尺寸时，毛坯直径的简捷计算公式。并进行了误差分析，最后用实例对简捷计算方法的正确性给予了验证。     

线性联合检测算法在TD-SCDMA系统中的性能分析与比较

时分、同步码分多址（TD－SCDMA）系统是基于时分双工（TDD）的块传输系统，它使用了联合检测这项关键技术来抵抗符号间干扰（ISI）和多址干扰（MAI）。以上行链路为例，本文分析了三种线性联合检测算法－－匹配滤波块均衡器（MF－BLE）、迫零块均衡器（ZF－BLE）和最小均方误差块均衡器（MMSE－BLE）。从理论上，我们描述了这三种线性联合检测算法的基本原理，并对它们进行了比较（包括抗干扰性能和计算量）。随后，我们模拟了不同参数条件下（信道模型、码道数目、天线数目）这几种算法的性能，并与理论分析进行对照，得出一定结论。     

大中型风力发电机组可靠性研究

研究了大中型风力发电机组的可靠性，讨论了可靠性指标的分配，可靠性设计的四个重要方面、可靠性试验计算机模拟。     

一种快速中值滤波算法在集装箱检查系统中的应用

讨论了一种新的中值滤波算法，有效地降低了传统中值滤波算法的时间复杂度，提高了计算效率和运算速度。该算法在大型集装箱检查图像处理中的应用，取得了良好的效果，提高了图像处理的速度，增强了图像处理的实时性。