SiO_2/Al_2O_3 RATIO OF HYDRATED SODIUM ALUMINOSILICATE IN ALUMINA PRODUCTION

ＳｉＯ２／Ａｌ２Ｏ３ＲＡＴＩＯＯＦＨＹＤＲＡＴＥＤＳＯＤＩＵＭＡＬＵＭＩＮＯＳＩＬＩＣＡＴＥＩＮＡＬＵＭＩＮＡＰＲＯＤＵＣＴＩＯＮ①ＤｅｎｇＨｏｎｇｍｅｉ，ＺｅｎｇＷｅｎｍｉｎｇ，ＣｈｅｎＮｉａｎｙｉＳｈａｎｇｈａｉＩｎｓｔｉｔｕｔｅｏｆＭｅｔａｌｕ...     

环氧乙烷于控制保险粉合成中的副反应

采用密度泛函理论B3LYP法及自恰等密度PCM模型,在6-311G(d)基组条件中研究环氧乙烷在保险粉生产中参加的主要反应,系统论证环氧乙烷的去向.本文首先分析环氧乙烷于控制硫代硫酸钠含量的热力学、动力学基础及体系中各亲核试剂的反应活性,然后分析环氧乙烷各主要反应的比例关系.理论计算结果与实验结论一致,即硫代硫酸钠消耗的环氧乙烷最多(71.5%),其次是水(17.5%),甲醇(5.0%),亚硫酸氢钠(1.3%).     

An overview on microwave processing of material: A special emphasis on glass melting

Material processing adopting microwave heating has emerged as an alternative tool owing to faster processing, a cleaner environment, and several other advantages. This review provides a summary of recent reports of microwave synthesis of materials. This study reviews the use of microwave energy for application in several material processing technologies apart from food processing. A special emphasis has been made in the processing of glass adopting microwave energy. Melting of glass comprising SiO₂, P₂O₅, B₂O₃ as the main building block has been discussed. It has been revealed that silica, a microwave transparent material as reported earlier, can be heated under microwave heating directly. Microwave absorption of raw materials and different glass system has been discussed. Dielectric properties, particularly loss tangent or loss factor, are presented for some glass composition. Less evaporation of ingredient and low contamination from the crucible wall are noticed during glass melting using microwave heating. Enhanced iron redox ratio (Fe⁺²/∑Fe) in microwave processing may be considered an advantage in the preparation of heat absorbing filter glass. Small-scale glass melting using the microwave heating has a significant impact on energy and time saving. However, the challenges associated with the upscaling glass melting with microwave heating and future scope have been talked about.     

Mesoporous NiS2 Nanospheres Anode with Pseudocapacitance for High‐Rate and Long‐Life Sodium‐Ion Battery

It is of great importance to exploit electrode materials for sodium‐ion batteries (SIBs) with low cost, long life, and high‐rate capability. However, achieving quick charge and high power density is still a major challenge for most SIBs electrodes because of the sluggish sodiation kinetics. Herein, uniform and mesoporous NiS₂ nanospheres are synthesized via a facile one‐step polyvinylpyrrolidone assisted method. By controlling the voltage window, the mesoporous NiS₂ nanospheres present excellent electrochemical performance in SIBs. It delivers a high reversible specific capacity of 692 mA h g^?1. The NiS₂ anode also exhibits excellent high‐rate capability (253 mA h g^?1 at 5 A g^?1) and long‐term cycling performance (319 mA h g^?1 capacity remained even after 1000 cycles at 0.5 A g^?1). A dominant pseudocapacitance contribution is identified and verified by kinetics analysis. In addition, the amorphization and conversion reactions during the electrochemical process of the mesoporous NiS₂ nanospheres is also investigated by in situ X‐ray diffraction. The impressive electrochemical performance reveals that the NiS₂ offers great potential toward the development of next generation large scale energy storage.     

Simple synthesis of a porous Sb/Sb2O3 nanocomposite for a high-capacity anode material in Na-ion batteries

High-capacity anode materials are highly desirable for sodium ion batteries.Here,a porous Sb/Sb2O3 nanocomposite is successfully synthesized by the mild oxidization of Sb nanocrystals in air.In the composite,Sb contributes good conductivity and Sb2O3 improves cycling stability,particularly within the voltage window of 0.02-1.5 V.It remains at a reversible capacity of 540 mAh·g-1 after 180 cycles at 0.66 A·g-L Even at 10 A·g-1,the reversible capacity is still preserved at 412 mAh.g-1,equivalent to 71.6％ of that at 0.066 A.g-1.These results are much better than Sb nanocrystals with a similar size and structure.Expanding the voltage window to 0.02-2.5 V includes the conversion reaction between Sb2O3 and Sb into the discharge/charge profiles.This would induce a large volume change and high structure strain/stress,deteriorating the cycling stability.The identification of a proper voltage window for Sb/Sb2O3 paves the way for its development in sodium ion batteries.     

Formulation and development of ophthalmic in situ gel for the treatment ocular inflammation and infection using application of quality by design concept

Context: The conventional liquid ophthalmic delivery systems exhibit short pre-corneal residence time and the relative impermeability to the cornea which leads to poor ocular bioavailability.

Objective: The aim of this study was to apply quality by design (QbD) for development of dexamethasone sodium phosphate (DSP) and tobramycin sulfate (TS)-loaded thermoresponsive ophthalmic in situ gel containing Poloxamer 407 and hydroxyl propyl methyl cellulose (HPMC) K4M for prolonging the pre-corneal residence time, ocular bioavability and decreases the frequency of administration of dosage form. The material attributes and the critical quality attributes (CQA) of the in situ gel were identified. Central composite design (CCD) was adopted to optimize the formulation.

Materials and methods: The ophthalmic in situ forming gels were prepared by cold method. Materials attributes were the amount of Poloxamer 407 and HPMC and CQA identified were Gel strength, mucoadhesive index, gelation temperature and % of drug release of both drug.

Results and discussion: Optimized batch (F*) containing 16.75% poloxamer 407 and 0.54% HPMC K4M were exhibited all results in acceptable limits. Compared with the marketed formulation, optimized in situ gel showed delayed T_max, improved C_max and AUC in rabbit aqueous humor, suggesting the sustained drug release and better corneal penetration and absorption.

Conclusion: According to the study, it could be concluded that DSP and TS would be successfully formulated as in situ gelling mucoadhesive system for the treatment of steroid responsive eye infections with the properties of sustained drug release, prolonged ocular retention and improved corneal penetration.     

海藻酸钠纳米粒制备的研究进展

纳米粒药物载体能帮助药物靶向传输及可控释放,是生物医药领域的重要研究方向。海藻酸钠生物相容性好、易于修饰及加工形成微纳米颗粒,作为药物载体的应用研究日渐增多。综述了制备海藻酸钠纳米粒的4种方法,即离子交联法、乳化法、静电络合法和自组装法,并指出了4种方法的优缺点。     

Tailoring NiO Nanostructured Arrays by Sulfate Anions for Sodium‐Ion Batteries

In this contribution, a novel sulfate‐ion‐controlled synthesis is developed to fabricate freestanding nickel hydroxide nanoarrays on Ni substrate. As an inorganic morphology‐controlled agent, SO₄²⁻ ions play a critical role in controlling the crystal growth and the nanoarray morphologies, by modulating the growth rate of adsorbed crystal facets or inserting into the metal hydroxide interlayers. By controlling the SO₄²⁻ concentration, the nanostructured arrays are tailored from one‐dimensional (1D) Ni(SO₄)_0.3(OH)_1.4 nanobelt arrays to hierarchical β ‐ Ni(OH)₂ nanosheet arrays. With further graphene oxide modification and postheat treatment, the obtained NiO/graphene hybrid nanoarrays show great potential for high‐performance sodium‐ion batteries, which exhibit a cyclability of 380 mAh g⁻¹ after undergoing 100 cycles at 0.5 C and reach a rate capability of 335 mA h g⁻¹ at 10 C.