Adsorption of aroma chemicals on cotton fabric from aqueous systems

The adsorption of aroma chemicals on cotton fabric was studied relative to the surfactant concentration, surfactant type, water solubility, and fiber morphology. The adsorption increased with increasing surfactant concentration to a maximum near the critical micelle concentration, then decreased with further increases in surfactant concentration. The adsorption also was found to be highly dependent on the fiber surface area and pore structure; dramatic differences were observed between untreated and mercerized cotton fabric and are believed to be due to morphological differences. Cationic and anionic surfactants increased the aroma chemical adsorption, which varied with surfactant type, with cetyltrimethylammonium chloride (CTAC)>sodium dodecyl sulfate (SDS)>H₂O. Water solubility also influenced adsorption; in most cases, adsorption increased with water solubility. In addition, adsorption was also influenced by chemical structure and hydrophobic interactions. The adsorption of aroma chemicals on cotton fabric can be attributed to the aqueous solution being physically held in capillaries and pore structures within the fibular structure of cotton fiber and also to molecular interactions among the aroma chemical molecules, surfactants, and cotton substrate.     

毛细管气相色谱法同时测定三磷酸胞苷二钠中5种有机溶剂残留量

研究建立了同时测定三磷酸胞苷二钠中乙醇、丙酮、氯甲醚、甲苯、苯乙烯5种有机溶剂残留量的毛细管气相色谱法。样品以乙腈为溶剂,经DB-FFAP(30 m×0.32 mm×0.25μm)毛细管柱分离,氢火焰离子化检测器检测,这5种有机溶剂呈良好的线性响应,平均回收率在98.3%~99.5%,精密度RSD在0.21%~1.92%,最低检出限可达5.0~7.5 mg/kg。本方法简单、灵敏、准确,完全能满足药品中所述有机溶剂残留量的测定要求。     

Graft copolymerization of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid onto carboxymethylcellulose (sodium salt) by H2O2/Fe+2 redox pair

The effect of the reaction conditions on the grafting parameters during grafting of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid onto sodium carboxymethylcellulose using H₂O₂/Fe⁺² redox pair are studied at 30°C. The grafting ratio, add on, and conversion initially increase with the H₂O₂ concentration in the range of (10.0–15.0) × 10^?2 mol dm^?3. Thereafter, these parameters decrease with the H₂O₂ concentration. The grafting ratio, add on, and conversion increase when increasing the ferrous ion concentration from (0.5 to 4.0) × 10^?2 mol dm^?3 and decrease with a further increase in the concentration. It is observed that the grafting ratio and add on increase with the monomer concentration, whereas the conversion decrease. The hydrogen ions seem to be facilitating the grafting reaction up to a certain concentration and after this concentration seem to be retarding the process. The grafting ratio, add on, and conversion decrease with the sodium carboxymethylcellulose concentration. When increasing the time period from 60 to 90 min, the grafting parameters increase but decrease thereafter. Similarly, when increasing the temperature from 25 to 30°C, the grafting parameters increase and decrease thereafter. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4819–4825, 2006     

氟硅酸钠生产实践

氟硅酸钠主要用于其他氟硅酸盐及氟化物、玻璃、陶瓷等行业的生产，针对国内氟硅酸钠生产企业普遍存在技术停滞不前的现状，从工艺角度对云南三环化工股份有限公司的氟硅酸钠生产进行了总结，介绍了氟硅酸钠的主要化学性质和用途；原料氟硅酸和氯化钠的适宜浓度和预处理方法；控制钠离子过量系数使产率稳定在92％以上；改变投料顺序生产不同粒度产品以满足用户需求；适宜的搅拌功率和干燥方式，以及废水的综合利用与处理方法，均给出了理论说明。对新建项目技术路线的选择亦提出了建议。     

我国氯酸钠生产技术概况及发展前景分析

概述了我国氯酸钠生产技术进展及推广应用情况。综合国内外氯酸钠生产现状分析了国内应用前景。指出我国氯酸钠工业的发展思路应是：合理利用资源，降低生产成本；利用新技术，降低消耗定额；利用自身氢气资源，发展高附加值化工产品和改变消费结构，扩大氯酸钠消费量。     

Aqueous and nonaqueous microemulsion systems with a palm oil-base emollient

Microemulsions with a palm oil-based emollient, i.e., medium-chain triglyceride (MCT), and water or glycerol, stabilized by two oppositely charged ionic surfactants and a medium-chain alcohol, were investigated. The results showed that only the water-in-MCT or the glycerol-in-MCT microemulsions were prominent. The maximum solubilization of the MCT emollient was higher in cetyltrimethyl ammonium bromide, i.e., the positively charged surfactant that contained a nitrogen atom, than the negatively charged surfactant sodium dodecyl sulfate. However, the results did not lend themselves for selecting any decisive factor that would explain the different solubilization behavior encountered in the investigated aqueous and nonaqueous systems.     

水基Fe3O4磁流体的制备工艺研究

用共沉淀法制备Fe3O4磁流体,总结出用十二烷基磺酸钠与聚乙二醇作为表面活性剂制备水基磁流体的合适条件:(1)反应温度为室温或不高于35℃;(2)表面活性剂十二烷基磺酸钠的最佳用量为0.0030～0.0040 g/80 mL;(3)第一次包裹的最佳pH为9～10;(4)聚乙二醇作为第二次包裹的表面活剂时,体系最佳温度为40℃左右;(5)表面活性剂聚乙二醇的最佳用量为0.0050～0.0060 g/80 mL。通过实验制得了能稳定存在180 d的水基磁流体。并用透射电镜、红外光谱、分光光度计、古埃磁天平等进行了初步表征。     

醇醚羧酸盐在日化产品中的应用性能研究

考察了脂肪醇聚氧乙烯醚乙酸钠(AE9C Na)的生物降解性和酸、碱水解稳定性,研究了AE9C Na在洗衣粉、肥皂及香波中的应用性能。结果表明,AE9C Na易生物降解,在整个pH值范围内具有良好的酸、碱水解稳定性;在普通肥皂中添加AE9C Na作钙皂分散剂,大大提高了其去污力、抗硬水性,在冷水中的溶解性及织物洗后纤维表面的光滑柔软性;与洗衣粉各助剂及常用各类型表面活性剂配伍性能良好,特别在高硬度水中显示出强大的去污力和钙皂分散能力;在香波中表现出强的起泡、稳泡能力和良好的增调作用。     

Structure and properties of collagen‐konjac glucomannan‐sodium alginate blend films

A new kind of blend film was made by mixing the solutions of collagen, konjac glucommnnan (KGM), and sodium alginate. The structure of the blend film was characterized by FTIR, XRD, atomic absorption spectrophotometer, and SEM, respectively. The effects of weight ratio between the polymers on light transmittance, tensile strength, elongation at break, water permeability, and water absorption of the film were studied. The results showed that there were strong interactions and good compatibility between collagen, KGM, and sodium alginate in the film. The film possesses good mechanical properties. Therefore, it can be applied in biomedicine as a new type of biomaterial. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Na_2O-TeO_2系统玻璃形成液体脆性的研究

通过测量Na2 O -TeO2 系统玻璃转化区的热容曲线 ,对该系统不同成分玻璃形成液体的热力学和动力学脆性进行研究。结果表明 :该系统玻璃形成液体从热力学和动力学综合看脆性程度介于强弱之间 ,为中性偏脆性。随着氧化钠含量的升高 ,玻璃形成液体的脆性增强。用Kissinger方程和Ritland -Bartanev方程 ,得到的在玻璃转变区的结构松弛激活能十分接近。对该系统玻璃形成液体脆性参数的计算也得到该玻璃形成液体脆性分类的相同结果