从氯化铅渣中回收铅铋的研究

本文以柿竹园有色金属矿粗铋火法精炼、气化除铅产出的铅渣为原料，在常压下采用氯化钠水溶液进行浸出处理，有效地分离了铅和铋，并将铅制成了化工产品黄丹及硫酸铅     

Solubilization of unilamellar liposomes by betaine-type zwitterionic/anionic surfactant systems

The mechanisms governing the solubilizing interactions between zwitterionic/anionic mixed surfactant systems at different molar fractions of the zwitterionic surfactant (X_zwitter) and neutral or electrically charged unilamellar liposomes were investigated. The mixed systems were formed by N-dodecyl-N,N-dimethylbetaine and sodium dodecyl sulfate in the presence of piperazine-1,4-bis-(2-ethanesulfonic acid) buffer at pH 7.20. Unilamellar liposomes formed by egg phosphatidylcholine, in some cases together with stearylamine or phosphatidic acid, were used. Solubilization was detected as a decrease in static light-scattering of liposomes. Two parameters were regarded as corresponding to the effective surfactant/lipid molar ratios (Re) at which the surfactant system (i) saturated the liposomes, Re_sat, and (ii) led to a total solubilization of liposomes, Re_sol. From these parameters the bilayer/aqueous medium surfactant partition coefficients for the saturation (K_sat) and complete bilayer solubilization (K_sol) were determined. When X_zwitter was 0.40, The Re and K parameters showed a maximum, whereas the critical micellar concentration (CMC) of these systems exhibited a minimum, regardless of the electrical charge of bilayers. Given that the ability of the surfactant systems to saturate or solubilize liposomes is inversely related to the Re_sat and Re_sol parameters, these capacities appear to be directly correlated with the CMC of the mixed systems. The similarity of both K_sat and K_sol (particularly for X_zwitter=0.2–0.8) suggests that a similar partition equilibrium governs both the saturation and the complete solubilization of bilayers, the free surfactant concentration (S_a,S_b), remaining almost constant with similar values to the CMC for each mixed system studied.     

微量Si在W—7Ni—3Fe重合金中的行为

研究了掺到原料Ｗ粉中微量Ｓｉ（４００ｐｐｍ）在Ｗ－７Ｎｉ－３Ｆｅ重合金中的分布及在液相烧结过程中的行为。结果表明，Ｓｉ主要以固溶形式分布在Ｗ晶粒中。Ｘ射线光电子能谱（ＸＰＳ）分析发现，在掺杂Ｓｉ的Ｗ－Ｗ及Ｗ－基体相界面富集ＳｉＯ２和Ｎａ２ＳｉＯ３在未掺杂试样的断口表面发现了较弱的ＷＯ２的ＸＰＳ谱，而在掺杂合金中未发现ＷＯ２。     

Effects of SO2 and SO3 on the Na2SO4 induced corrosion of nickel

The effects of SO₂ and SO₃ in the environment on the hot corrosion behavior of Ni in the temperature range 750–950°C has been studied. Below the melting point of Na₂SO₄ (884°C), rapid corrosion takes place by formation of a Na₂SO₄-NiSO₄ melt, which can penetrate the porous oxide scale and give rise to sulfide information by coming in contact with the metal. The distribution of the sulfides depends on the SO₂ level in the ambient gas. Continued corrosion occurs by a sulfidation-oxidation mechanism. At temperatures above the melting point of Na₂SO₄, accelerated degradation occurs via dissolution of the surface scale, followed by reprecipitation of the oxide in a nonprotective form.Deceased     

大气电场倒转与突发钠层及突发E层的相关性

突发钠层(Sporadic Sodium Layer, Na_S)是中高层大气金属层最为显著的一种现象,其发生机制目前尚无定论。突发E层(Sporadic E layer, E_S)是等离子体密度异常增大的薄层,被认为与Na_S密切相关。为进一步研究Na_S及E_S事件之间相关性及影响因素,利用中国科学院“子午工程”2010～2018年合肥科大站宽带钠荧光共振激光雷达观测结果,并结合武汉左岭镇站数字测高仪及九峰站大气电场仪数据,分析大气电场倒转(即北向电场)对Na_S以及E_S事件的影响。在统计的91例Na_S事件中,发生于大气电场倒转时的比例为20/91; 同时,在发生Na_S事件的事例中,E_S消失或中断的比例较大(14/20),表明E_S可能以提供钠源的形式转化为Na_S。此外,在分析武汉左岭镇站数字测高仪数据的同时进行概率统计,结果表明:当大气电场倒转时,E_S临界频率减小甚至消失的概率较大(187/242),少数情况下可能造成临界频率增大甚至激发E_S生成(55/242); E_S虚高消失比例为179/242,E_S不变比例为27/242,E_S上升比例为23/242。综上所述,大气北向电场在一定程度上对E_S事件的发生有抑制作用,并对E_S事件的发生高度有明显影响。最后,对一种与电场倒转相关的突发钠层机制也进行了讨论。     

液相化学还原法制备不同形貌的多晶纳米镍

采用液相化学还原法,在1,2-丙二醇体系中,分别使用吐温-80（Tween-80）、聚乙二醇-6000（PEG-6000）和十二烷基硫酸钠（SDS）与聚乙二醇-6000（PEG-6000）的混合物作为修饰剂,利用1,2-丙二醇还原相同母体醋酸镍,制备形貌分别为海绵体、纤维状、雪花状的多晶纳米镍;在水体系中,使用SDS为修饰剂,利用水合肼还原相同母体醋酸镍,制备球形多晶纳米镍。通过X射线衍射（XRD）、透射电子显微镜（TEM）、选区电子衍射（SAED）对纳米镍进行表征。利用傅立叶红外（FTIR）分析初步解释不同形貌纳米镍的形成机理。     

铸造用CO2硬化冷芯盒材料及工艺的发展

铸造用CO2硬化粘结剂系统具有气硬冷芯盒的优点,同时又具有环保方面的优势。主要介绍了水玻璃-CO2法、聚丙烯酸钠-CO2法、酚醛树脂-CO2法三种工艺。这些工艺方法近年来国内外研究较多,并且取得了很大进展。     

Hydrogen Sulfide Metabolite,Sodium Thiosulfate: Clinical Applications and Underlying Molecular Mechanisms

Thiosulfate in the form of sodium thiosulfate (STS) is a major oxidation product of hydrogen sulfide (H₂S), an endogenous signaling molecule and the third member of the gasotransmitter family. STS is currently used in the clinical treatment of acute cyanide poisoning, cisplatin toxicities in cancer therapy, and calciphylaxis in dialysis patients. Burgeoning evidence show that STS has antioxidant and anti-inflammatory properties, making it a potential therapeutic candidate molecule that can target multiple molecular pathways in various diseases and drug-induced toxicities. This review discusses the biochemical and molecular pathways in the generation of STS from H₂S, its clinical usefulness, and potential clinical applications, as well as the molecular mechanisms underlying these clinical applications and a future perspective in kidney transplantation.     

高钠煤灰烧结特性研究进展

中国新疆准东煤具有储量巨大、开采成本低、挥发分高、硫含量低等特点,是优质的动力用煤。但准东煤钠含量高,燃烧利用时易在受热面上形成烧结性积灰,产生严重的结渣,极大限制了高钠煤的开发利用。因此,要实现高钠煤的清洁高效利用,需充分认识高钠煤灰的烧结特性。总结了高钠煤积灰结渣机理,概述了高钠煤灰烧结机制,探讨了二者之间的内在关联。高钠煤在燃烧过程中,煤中碱金属(主要为钠)释放并以Na_2SO_4、NaCl及Na的形式存在于烟气中,与受热面接触并于其上冷凝形成黏性内白层,内白层捕获飞灰颗粒后反应生成低熔点化合物,其烧结温度降低,使锅炉受热面上发生沾污增强型的"沾污烧结"过程。高钠煤灰的烧结过程包含固相烧结、液相烧结和气相烧结3种方式,对煤灰烧结过程的影响因素包括反应温度、化学组成、煤灰粒径、反应气氛、添加剂种类、锅炉设计和锅炉运行工况等。其中添加剂按氧化物种类可分为碱性氧化物和酸性氧化物,一般情况下碱性氧化物可以降低煤灰烧结温度,酸性氧化物可提高煤灰烧结温度。未来对于提高高钠煤灰烧结温度的研究方向可从新型添加剂出发,找到既能固定烟气中的钠,又能与灰渣中的低熔点含钠矿物质反应生成高熔点化合物的单一或混合成分的添加剂。同时,关于钠蒸气对积灰结渣在微观层面上的动态特性的影响机制也需进一步研究。概述了煤灰烧结温度的测量方法,热导率分析法、压力测量法、热机械分析法、筛分法和压降法,其中压降法是目前为止测量烧结温度较为准确的方法。介绍了上海理工大学碳基燃料洁净转化实验室在高钠煤灰烧结特性方面的研究方向,以期为解决燃用高钠煤锅炉积灰结渣问题提供参考。     

氟硅酸钾滴定法测定粗制氟化钠中二氧化硅

采用硝酸-氢氟酸混合酸为消解溶剂,通过微波消解技术对粗制氟化钠进行快速消解,并用氟硅酸钾滴定法测定其二氧化硅含量。选择饱和氯化钾溶液替代固体氯化钾作为沉淀剂,考察了消解酸体系、饱和氯化钾溶液用量、沉淀温度、沉淀放置时间、共存元素干扰及指示剂选择等条件对测定结果的影响并进行优化。确定了最优测试条件：以8 mL硝酸+2 mL氢氟酸为消解溶剂,以8 mL饱和氯化钾溶液为沉淀剂,控制沉淀温度为20~25 ℃、沉淀放置时间为15 min,选择50 g/L氯化钾-50%乙醇溶液洗涤沉淀,采用溴麝香草酚蓝-酚红指示剂。该方法应用于回收粗制氟化钠中二氧化硅含量的测定可大幅度缩短分解试样的时间,有效降低检测成本,回收率为99.15%~100.63%,相对标准偏差（RSD,n=8）小于1%,与传统高温碱熔法测定结果相符,方法的准确度和精密度较好。