环流式碳化塔研究与操作实践

遵循过程不冷却,结晶为控制过程等工艺原则、操作理论和技术路线,在 164×3620环流式碳化塔中分别进行了联合制碱法和氨碱法母液的碳酸化重碱结晶过程模拟试验,介绍了主要条件试验和连续运转120h的试验数据,讨论了晶浆浓度、操作过饱和度、液体环流速度、结晶温度和溶液碳化度等结晶过程工艺参数,考察了二氧化碳吸收传质总系数并比较了塔的二氧化碳吸收容积能力和重碱结晶容积能力,测定了碳酸氢钠平均结疤速度。     

Sodium alginate–poly(hydroxyethylmethacrylate) interpenetrating polymeric network membranes for the pervaporation dehydration of ethanol and tetrahydrofuran

Interpenetrating polymeric network (IPN) membranes of sodium alginate (NaAlg) and various amounts of poly(hydroxyethylmethacrylate) (PHEMA) have been prepared and tested for the pervaporation dehydration of ethanol and tetrahydrofuran (THF). The presence of hydrophilic PHEMA in the IPN matrix was found to be responsible for increase in membrane selectivity to water. NaAlg–PHEMA IPN membrane containing 20 wt % of PHEMA exhibited a selectivity of 571 to water for the water–ethanol mixture and 857 for water–THF mixture. These data are much better than those observed for the pristine NaAlg membrane. However, flux of the IPN membranes was smaller than that of pristine NaAlg membrane. Comparatively higher flux values were observed for water–THF mixture than for water–ethanol mixture. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3324–3329, 2006     

含盐次氯酸钠酮连氮法制备水合肼研究

研究了酮连氮法制备水合肼 ,并考察了原料次氯酸钠的质量浓度以及氯化钠的含量对合成的影响。试验结果表明 ,次氯酸钠的质量浓度对合成水合肼影响较大 ,而原料中氯化钠的含量对合成水合肼影响不大 ,但对分离提纯操作工艺有一定影响。     

中国铬盐生产现状与发展建议

较全面地回顾了中国铬盐生产历史和现状，系统总结了铬盐行业发展过程中的经验教训，提出了中国铬盐生产发展的建议，即中国铬盐工业在大型化的同时，应推广采用新工艺、新技术；应开发新品种，进行深加工；应密切注意最新技术动向，并及时跟进。     

水乳剂用壬基酚聚氧乙烯配磷酸酯的合成

以壬基酚聚氧乙烯醚(TX-10)、P2O5为原料,合成了水乳剂壬基酚聚氧乙烯醚磷酸酯。通过对还原剂用量等因素的讨论,确定最佳工艺条件为:次亚磷酸钠用量为TX-10的0.4%,n(TX-10)∶n(P2O5)∶n(H2O)=2∶1∶0.8,反应温度60℃,反应时间5h。在此条件下产品的酯化率为96.84%。     

Empirical equations for the thermodynamic properties of aqueous sodium chloride

Equations for the thermodynamic properties of aqueous sodium chloride near its vapour pressure are presented. The equations are functions of temperature and concentration, and may be used to estimate aqueous sodium chloride's solubility, density, vapour pressure, specific enthalpy and entropy. They are valid for temperatures from 0 to 300°C, and concentrations extending to saturation with suitable accuracy. The thermodynamic equations are represented graphically and compared with published experimental data. These equations should prove to be a useful tool for modeling desalination equipment, particularly distillation processes.     

Adsorption of aroma chemicals on cotton fabric from aqueous systems

The adsorption of aroma chemicals on cotton fabric was studied relative to the surfactant concentration, surfactant type, water solubility, and fiber morphology. The adsorption increased with increasing surfactant concentration to a maximum near the critical micelle concentration, then decreased with further increases in surfactant concentration. The adsorption also was found to be highly dependent on the fiber surface area and pore structure; dramatic differences were observed between untreated and mercerized cotton fabric and are believed to be due to morphological differences. Cationic and anionic surfactants increased the aroma chemical adsorption, which varied with surfactant type, with cetyltrimethylammonium chloride (CTAC)>sodium dodecyl sulfate (SDS)>H₂O. Water solubility also influenced adsorption; in most cases, adsorption increased with water solubility. In addition, adsorption was also influenced by chemical structure and hydrophobic interactions. The adsorption of aroma chemicals on cotton fabric can be attributed to the aqueous solution being physically held in capillaries and pore structures within the fibular structure of cotton fiber and also to molecular interactions among the aroma chemical molecules, surfactants, and cotton substrate.     

毛细管气相色谱法同时测定三磷酸胞苷二钠中5种有机溶剂残留量

研究建立了同时测定三磷酸胞苷二钠中乙醇、丙酮、氯甲醚、甲苯、苯乙烯5种有机溶剂残留量的毛细管气相色谱法。样品以乙腈为溶剂,经DB-FFAP(30 m×0.32 mm×0.25μm)毛细管柱分离,氢火焰离子化检测器检测,这5种有机溶剂呈良好的线性响应,平均回收率在98.3%~99.5%,精密度RSD在0.21%~1.92%,最低检出限可达5.0~7.5 mg/kg。本方法简单、灵敏、准确,完全能满足药品中所述有机溶剂残留量的测定要求。     

Graft copolymerization of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid onto carboxymethylcellulose (sodium salt) by H2O2/Fe+2 redox pair

The effect of the reaction conditions on the grafting parameters during grafting of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid onto sodium carboxymethylcellulose using H₂O₂/Fe⁺² redox pair are studied at 30°C. The grafting ratio, add on, and conversion initially increase with the H₂O₂ concentration in the range of (10.0–15.0) × 10^?2 mol dm^?3. Thereafter, these parameters decrease with the H₂O₂ concentration. The grafting ratio, add on, and conversion increase when increasing the ferrous ion concentration from (0.5 to 4.0) × 10^?2 mol dm^?3 and decrease with a further increase in the concentration. It is observed that the grafting ratio and add on increase with the monomer concentration, whereas the conversion decrease. The hydrogen ions seem to be facilitating the grafting reaction up to a certain concentration and after this concentration seem to be retarding the process. The grafting ratio, add on, and conversion decrease with the sodium carboxymethylcellulose concentration. When increasing the time period from 60 to 90 min, the grafting parameters increase but decrease thereafter. Similarly, when increasing the temperature from 25 to 30°C, the grafting parameters increase and decrease thereafter. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4819–4825, 2006     

水基Fe3O4磁流体的制备工艺研究

用共沉淀法制备Fe3O4磁流体,总结出用十二烷基磺酸钠与聚乙二醇作为表面活性剂制备水基磁流体的合适条件:(1)反应温度为室温或不高于35℃;(2)表面活性剂十二烷基磺酸钠的最佳用量为0.0030～0.0040 g/80 mL;(3)第一次包裹的最佳pH为9～10;(4)聚乙二醇作为第二次包裹的表面活剂时,体系最佳温度为40℃左右;(5)表面活性剂聚乙二醇的最佳用量为0.0050～0.0060 g/80 mL。通过实验制得了能稳定存在180 d的水基磁流体。并用透射电镜、红外光谱、分光光度计、古埃磁天平等进行了初步表征。