面粉质量指标体系的聚类分析

引进聚类分析方法对面粉质量指标体系进行研究讨论。借助对一组测试数据的分析处理，介绍了用聚类分析方法研究面粉质量指标体系的详尽过程，并证实了这种方法的适用性。其中得到的重要结论为：与面粉烘焙品质极为相关的物理指标是３项“时间”指标，成份指标是“剩余蛋白含量     

Characterisation of chickpea flour‐based gluten‐free batters and muffins with added biopolymers: rheological,physical and sensory properties

Chickpea flour (CF)‐based muffin formulations were made with CF alone and with added biopolymers [whey protein (WP), xanthan gum (XG) and inulin (INL)] to evaluate their suitability to be a wheat flour (WF) substitute in muffins. Structural characteristics of the batters and muffins were studied by means of rheometry, microscopy, physicochemical properties, and texture and sensory analysis. Partial replacement of CF with XG, alone (at 0.5 and 1%) or blended with either WP or INL, significantly increased the batter viscoelasticity as denser matrices developed; moreover, the muffins with XG added at 1% had similar hardness to wheat gluten muffins. The replacement of WF decreased the springiness, cohesiveness, chewiness, resilience and specific volume of the muffin. However, baked muffins with added XG also showed higher sensory sponginess and moisture associated with numerous air bubbles in the batter and were perceived to be easier to swallow and to have better general appearance.     

Influence of konjac flour on foaming properties of milk protein concentrate and quality characteristics of gluten‐free cookie

The effects of konjac flour (KF) for modifying the foaming properties of milk protein concentrate (MPC) and characteristics of gluten‐free rice cookies were investigated. The three variables of konjac concentration (0.1–0.4%), pH (pH 5–9) and NaCl concentration (0.2–0.6 м) were studied. Both KF and pH had considerable effects on the foaming capacity (FC) and foaming stability (FS) of MPC. The NaCl had a negligible effect. Lowered FC and FS observed at pH 9 and pH 5 were increased with the increase in KF addition. Batter characteristics (flowability and consistency), cookie quality (moisture, yield, spread ratio, specific volume, hardness and colour) and sensory acceptance were evaluated in gluten‐free cookies with 0%, 0.25% and 0.4% KF. Konjac supplementation increased batter characteristics, yield, specific volume and hardness, but decreased lightness. Panellist acceptance, especially regarding texture and overall acceptability, increased in gluten‐free cookies with 0.4% KF. A higher purchasing decision was found for cookies with added KF.     

Physicochemical property changes in germinated brown rice flour from different storage periods of paddy rice

This study revealed that the storage duration (2, 4, 6, 8, 10 and 12 months) of paddy rice and pH (3 and 6.8) of steeping water during germination were significantly influenced the physicochemical properties of germinated brown rice flour (GBRF). GBRF obtained at pH 3 vs. 6.8 provided the highest both reducing sugar content and free gamma‐aminobutyric acid (GABA) content (99.8 vs. 54.2 mg per 100 g flour respectively) as the paddy rice was stored for 8 months. The peak viscosity of GBRF obtained at pH 3 and 6.8 exhibited the lower values than that of non‐GBRF throughout the storage. From the principal component analysis, reducing sugar had a positive correlation with α‐amylase activity whereas a negative correlation was found with peak viscosity. GBRF from paddy rice stored for 8 months and germinated at pH 3 possessed the highest free GABA content, 50 times of the non‐GBRF, which can be further utilised in functional and healthy foods.     

体外消化/Caco-2细胞模型分析发酵对面粉铁生物利用率的影响

中国居民膳食以谷物为主食,谷物中铁吸收率低是造成营养性贫血的主要原因,适当的加工方式可缓解谷物中植酸、多酚等物质对铁生物利用率(Fe bioavailability,FeBV)的影响。为考察酵母发酵对面粉FeBV的影响,采用体外消化/Caco-2细胞模型。结果表明,面团在发酵后pH值呈下降趋势,酸度呈上升趋势;多酚、植酸含量降低,植酸酶活性升高,以上各指标在发酵前后差异均具有统计学意义(P0.05)。发酵后面粉样品的FeBV增加约5%~38%,大多数面粉FeBV发酵前后比较,差异具有统计学意义(P0.05)。结论:发酵可降低面粉的pH值,增加酸度,有利于面粉多酚和植酸的降解以及植酸酶活力的升高,可有效提高面粉FeBV。     

Fermentation and heat-moisture treatment induced changes on the physicochemical properties of foxtail millet (Setaria italica) flour

This research intends to verify the effect of Lactobacillus paracasei Fn032 fermentation and heat-moisture treatment (HMT) on the physicochemical properties of foxtail millet (Setaria italica) flour. The results obtained showed a significant (P < 0.05) increase in protein content (12.02–20.54%), total starch (15.78–51.01%) and starch fractions after fermentation and HMT. Differential scanning calorimetry (DSC) analysis showed high decomposition temperature (T_d) trend of 180.59 and 189.82 °C after HMT. However, there was significant (P < 0.05) enthalpy (ΔH) decrease. Flour digestion resulted in variation of slow digestible starch (SDS) and resistant starch (RS) count from 6.83 to 18.42% and 7.61 to 22.68% respectively, after fermentation and HTM. Following this observation, it was ascertained that in X-ray diffraction; pasting viscosity and fluorescence spectrophotometry show greater HMT influenced on the flour components. Findings from the scanning electron microscopy (SEM) analysis showed microstructure differences of the flours samples. Fermentation and heat moisture treatment methods present a possible way of changing or improving the physicochemical properties and add nutritional value to foxtail millet meal.     

Preparation and optimization of soy protein isolate–high methoxy pectin microcapsules loaded with Lactobacillus delbrueckii

This study was aimed to use soy protein isolate (SPI) and high methoxy pectin (HMP) as encapsulating materials for probiotic bacterial (Lactobacillus delbrueckii) delivery systems. The encapsulation conditions were optimised, and scanning electron microscopy (SEM) was used to characterise the microstructural changes of the microcapsule. The results showed that the optimal conditions for microcapsule preparation were 90 mg mL^?1 SPI and 1 mg mL^?1 HMP, with a SPI/HMP ratio of 7:1 (v/v), and a L. delbrueckii suspension to SPI–HMP complex ratio of 1:1 (v/v). The viability of the probiotics in the microcapsules reaching the small intestine was 3 log CFU mL^?1 higher than that of naked bacteria. SEM showed that the surface of the SPI–HMP compound microcapsules was smooth and that a large number of L. delbrueckii could be seen in cross‐sections of the microcapsules.     

Partially Hydrolyzed Soy Protein Shows Enhanced Transport of Amino Acids Compared to Nonhydrolyzed Protein across an Intestinal Epithelial Cell Monolayer

Consumption of protein hydrolysates has been proposed to stimulate muscle anabolism more than intact (nonhydrolyzed) proteins via accelerated delivery of amino acids for muscle protein synthesis (MPS). We evaluated whether the rate of amino acid uptake and transport across intestinal cells was enhanced for soy protein hydrolysates versus nonhydrolyzed soy protein. Intact and partially hydrolyzed proteins were subject to simulated gut digestion and applied to the apical surface of Caco‐2 monolayers. Basolateral media was harvested after 3 h and quantitatively analyzed for free amino acids using ion‐exchange chromatography and comparison to an included reference standard. Basolateral concentrations of all amino acids were higher (mean 32%) for hydrolyzed versus nonhydrolyzed protein with the greatest differences in histidine, lysine, and valine. Scale‐up production of the soy protein hydrolysate did not diminish its enhanced absorption properties. These data support the hypothesis that hydrolyzed soy protein may provide dietary amino acids that are more rapidly transported across the intestinal epithelium versus intact soy protein. This would be important under conditions where rapid and increased levels of amino acids are needed such as in the stimulation of MPS.     

A bench-scale high-shear wet-milling test for wheat flour

Bench-scale wet-milling tests for wheat flour are available for the traditional processes of Martin and Batter, but tests for the high-shear processes of Alfa-Laval/Raisio, Hydrocyclone, and High-Pressure Disintegration are few in number. In this study, critical processing parameters of a high-shear wet-milling process, namely high-shear mixing, gluten-aging, and gluten-washing steps, were investigated using response surface methodology, and those parameters led to a bench-scale wet-milling test starting with a “highly sheared flour–water dispersion” (HS-FWD). Optimum conditions for the test were: a water–flour ratio (db) of 1.7, water temperature of 35 °C, and homogenizer speed of 6000 rpm for 2.0 min in the high-shear mixing step, a temperature of 40 °C for 20 min in the gluten-aging step, and gluten-washing of 2.0 min in the Glutomatic system. The HS-FWD wet-milling test with high level of repeatability was capable of discriminating wet-milling qualities of several hard, soft, and coarsely ground wheat flours.     

Influence of temperature and application rate on efficacy of a diatomaceous earth formulation against Tribolium castaneum adults

Unsanitary storage bins can harbor grain-infesting insects, including the red flour beetle, Tribolium castaneum (Herbst). In a previous study involving heat treatment of empty bins, temperatures in the range of 50–55 °C for 2–4 h were effective in completely killing stored-product insects. Previous research in flour mills showed improved efficacy in killing stored-product insects by using diatomaceous earth (DE) dusts at temperatures below 50 °C. In the current study, the efficacy of a diatomaceous earth formulation (DiaFil^® 610) applied to concrete arenas, to simulate floor of empty bins, was examined at three application rates (0, 2.5 and 5.0 g/m²) to control T. castaneum adults at five constant temperatures (28, 36, 42, 44, and 46 °C). Ten adults of T. castaneum were placed on individual untreated and DE-treated concrete arenas for 4, 8, 12, and 24 h at each of the five temperatures. The efficacy of DE against T. castaneum adults increased with an increase in temperature and exposure time. Generally more adults died at 5.0 g/m² when compared with 2.5 g/m². In 2.5 and 5.0 g/m² DE treatments, exposure for 12 h at a temperature of 42 °C resulted in 73–77% mortality of adults with 100% mortality observed after 24 h. At 44 and 46 °C, 100% mortality of adults was observed after 24 h of exposure at both DE rates. At these two temperatures, the high mortality in untreated arenas (controls) at 8, 12, and 24 h exposures ranged from 27 to 100% confounding the true effects of DE. Our results suggest that combined use of DE and temperatures below 50 °C can be used as an integrated approach for controlling insects in empty bins prior to storage of newly-harvested grain.