Dynamic response of Kevlar®29/epoxy laminates under projectile impact-experimental investigation

This authors of this article investigated the dynamic response of woven Kevlar®29/epoxy laminates subjected to the impact loading. The cylindrical aluminum foam projectile and steel projectile were used to exert the impulse on the laminates. Deformation/failure modes, deflections, strain histories, and failure mechanisms were obtained and discussed. The results showed that with the high toughness of Kevlar fiber, the deformation modes of the laminates exhibited some characteristics similar to the metal panel, such as large global deformation. The failure mechanisms like matrix failure, fiber splitting, and fibrillation were observed. These micron failures led to the macroscopic delamination and fracture of the laminates.     

具有保温性能的电纺LA/PET纳米纤维复合织物的制备与表征

本文制备了电纺月桂酸(LA)/聚对苯二甲酸乙二醇酯(PET)纳米纤维/机织物的复合织物,并对其进行了表征.选用纯棉纱线、毛纱线、涤棉纱线、腈纶纱线和涤纶纱线分别作为经纬纱线,在实验室制备机织物小样,同时,通过静电纺丝法制备LA/PET纳米纤维,将LA包裹在PET基材之中.之后通过缝合的方式,将电纺LA/PET纳米纤维和机织物构造成三明治结构的复合织物.对纳米纤维的形貌和热性能进行了表征,并分别探究了LA/PET的质量比,机织物组织结构和机织物材料对复合织物保温性能的影响.结果表明:LA/PET纳米纤维呈圆柱形,具有光滑表面,LA和PET展现出良好的相容性,热焓值略低于理论值,但相变温度改变不大.复合织物的热保温性能测试表明,复合织物的保温性能都优于未加入相变材料的织物,同时展现出良好的热循环稳定性.     

碳纳米管-玻璃纤维织物增强环氧复合材料的结构与性能

通过物理沉积法和静电吸附法在玻璃纤维织物(GF)表面包覆多壁碳纳米管(MWCNTs),制备GF-d-CNTs和GF-a-CNTs两种多尺度增强体,采用真空灌注工艺制备MWCNTs-GF增强环氧复合材料。采用静态、动态力学法、扫描电镜、红外光谱等分析手段,对复合材料的拉伸、弯曲、层间剪切、黏弹性和微观组成结构表征。结果表明:MWCNTs包覆于GF表面形成"倒刺"结构,并通过啮合作用增强了复合材料界面的强度和树脂韧性,提高了复合材料的玻璃化温度(Tg)等;与纯GF复合材料相比,GF-d-CNTs复合材料的拉伸强度和模量分别提高14.5%和37.9%,弯曲强度和模量分别提高26.2%和36.6%,层间剪切强度提高31.5%;GF-a-CNTs复合材料的Tg提高了8.9℃。     

中空涤纶/不锈钢/竹炭保温透湿材料的开发及性能研究

通过花式捻线方法将中空涤纶、不锈钢长丝和竹炭纤维三种功能性纤维并捻获得复合纱线,利用纱线强度、毛羽和实际捻度测试,得到最佳的纱线纺制参数。并采用最佳工艺参数纺制的包绕纱线进行平纹织物织造,对其织物透湿性、远红外发射率以及保温性能进行测试表征,最终制备一种可用于防寒服的新型保温透湿织物。结果表明,缠绕捻度为上捻度200,下捻度0时,纺制的包芯纱具有最佳捻度。中空涤纶/不锈钢/竹炭织物透湿率为5 184g/(m2·24h),达到透湿织物透湿要求的2倍以上。一至四层织物的远红外发射率均在70%及以上,符合远红外发射率具有功能性结果的范围。织物克罗值达到7.355clo,高于极低温作业穿着克罗值51.6%,可满足极低温环境下的织物保温要求。织物保温率为62.43%,相比于棉、毛等传统纺织原料,织物保温率可以提升2倍以上。     

Novel transcatheter aortic heart valves exhibiting excellent hemodynamic performance and low-fouling property

Transcatheter aortic heart valves (TAHVs) have been widely used for aortic valve replacements, with less trauma and lower clinical risk compared with traditional surgical heart valve replacements. In the present study, composites of poly(ethylene glycol) diacrylate (PEGDA) hydrogels and anisotropic high-shrinkage polyethylene terephthalate/polyamide6 (PET-PA6) fabric (PEGDA/PET-PA6) were fabricated as artificial heart valve leaflets. Dynamic mechanical analyses (DMA) indicated that PEGDA/PET-PA6 composites possessed anisotropic mechanical properties (i.e., storage moduli ～23.30 ± 1.36 MPa parallel to the aligned fabric fibers and ～9.68 ± 0.90 MPa perpendicular to the aligned fibers at 1 Hz) that were comparable to aortic valve leaflets. The PEGDA/PET-PA6 composites with smooth surfaces were highly hydrophilic (contact angle ～41.6° ± 3.8°) and had low-fouling properties without platelet adhesion, suggesting a low risk of thrombogenicity when they interacted with blood. Furthermore, transcatheter aortic heart valves were fabricated using nitinol self-expanding frames and PEGDA/PET-PA6 composites as artificial leaflets, which presented excellent hemodynamic performance with a large orifice area (1.75 cm²) and low regurgitation (3.41%), thus meeting the requirements of ISO 5840-3 standard. Therefore, PEGDA/PET-PA6 composites had suitable mechanical properties, good biocompatibility, and low-fouling properties, indicating that they might be used for TAHVs in the future.     

A DLT-based framework for secure IoT infrastructure in smart communities

In the field of smart communities, significant progress has been made in recent years. The objective of constructing smart communities is to improve the quality of life of their inhabitants. To accomplish this objective, technologies such as Internet of Things (IoT) and Artificial Intelligence (AI) were deployed. The data gathered and processed by IoT devices, particularly those with centralized control, are however susceptible to availability, integrity, and privacy risks. Due to its inherent properties of transparency, immutability, and underlying secure-by-design architecture, Distributed Ledger Technology (DLT) and Smart Contracts enable distributed, decentralized, automated workflows that can be incorporated to automate the management of the next generation of IoT networks. Using a potential use case, a conceptual architecture for securing smart communities with DLT is developed and explained. In this paper, a framework for IoT eco-systems is proposed that provides seamless integration between IoT and DLT to create a decentralized trusted architecture that ensures the trustworthiness of IoT eco-systems at design time and a trust reputation model based on the architecture to protect it at run-time. In addition, the initial implementation steps are described for this framework.     

确定垫片设计系数的简化方法及应用

基于螺栓法兰连接系统的载荷变形关系分析提出了确定垫片设计系数的简化方法,以不锈钢缠绕柔性石墨垫片实验结果计算绘制的ｙ ｐ图设计法兰,算例表明,按文中方法较现行规范更为合理和经济。     

我国童装设计的现状分析及应对策略初探

儿童的问题已经引起国人的日益关注,而我国童装业起步较晚,存在着各种问题,文章分析了我国童装设计中存在的主要问题及原因,在此基础上,结合童装的特点,提出了若干应对策略。     

典型ATM交换结构分析与交换机设计分类

目前的通信网正逐步向宽带化、综合化和智能化方向发展,为了传送高清晰度电视(HDTV)图像及高速数据,要求通信网高速宽带化。高速宽带通信与现有的电话及数据通信相比,应具有极宽的通信频带(几十Mbps以上)。另一方面,随着科技的发展,人们对通信的需求不断增加,导致未来通信业务的不确定性。因此,人们致力于研究新的通信方式以适应上述情况,其中,ATM可能是实现宽带ISDN的最佳方式,可以满     

iLQF调度算法及其参数的仿真

文章介绍一种无内部阻塞ATM交换结构的输入缓存模型及其缓存信元的iLQF调度算法(即迭代的最长队列优先调度算法),并具体给出该算法的实现方案。通过仿真,分析和确定了交换结构的输入缓存长度和iLQF调度算法的迭代次数对信元丢失率的影响。