Infrared study of salt free and salt treated cellulose pyrolysis under nitrogen atmosphere

The pyrolysis under nitrogen of salt free and salt treated cellulose was studied by infrared spectroscopy. The results confirm the unzipping mechanism suggested by DTA and TGA studies, and show this mechanism to apply to the untreated and salt treated samples. The results also show the unzipping to stop at the stage of char formation. The onset of this stage was found to occur after the volatilization of only 45–50% of the initial sample of the borax treated cellulose, compared with 65–70% of the KCl treated cellulose and 80–85% of the untreated cellulose.     

Softening and melting mechanisms of polyamides interfering with sliding stability under adhesive conditions

The thermal stability of polymers is a main issue when used as friction elements under dry sliding. Cast polyamide grades processed with either natrium or magnesium catalysors are slid on a small-scale and a large-scale test configuration to reveal the effect of softening or degradation on the sliding stability and to investigate possibilities for extrapolation of friction and wear rates between both testing scales. The combination of softening and afterwards transition into the glassy state is detrimental for the sliding stability of natrium catalysed polyamides, characterised by heavy noise during sliding. A transfer film formed under continuous softening also provides high friction. Melting during initial sliding is necessary for stabilisation in both friction and wear, and eventual softening of a molten film near the end of the test then not deteriorates the sliding stability. Softening of magnesium catalysed polyamides is favourable for the formation of a coherent transfer film resulting in more stable sliding than natrium catalysed polyamides. The differences in softening mechanisms of both polyamide grades is correlated to structural changes investigated by thermal analysis and Raman spectroscopy: the γ crystalline structure prevails in magnesium catalysed samples and the α crystalline structure is predominant in natrium catalysed samples. For internal oil lubricated polyamides, a time dependent degradation of the polyamide bulk deteriorates the supply of internal oil lubricant to the sliding interface, resulting in high friction and wear under overload conditions. As the degradation mechanisms during sliding are strongly correlated to the test set-up, extrapolation is only possible for friction in a limited application range, while wear rates cannot be extrapolated.     

Adhesive Bonding of Oil-Contaminated Steel Substrates

Durability of adhesive bonds formed by curing epoxies against oil-contaminated steel substrates using amidoamine curing agents was determined during exposure to boiling water. The most durable bonds were obtained using amidoamine curing agents with relatively low amine numbers and by blending silane coupling agents such as γ-glycidoxypropyltrimethoxysilane (γ-GPS) and N-(2-aminoethyl)-3-aminopropyltrimethoxy silane (AAMS) into the adhesives. When X-ray photoelectron spectroscopy (XPS) was used to characterize the failure surfaces of the adhesive joints after exposure to boiling water, it was determined that adhesives prepared using amidoamine curing agents with low amine numbers were able to displace the oil from the steel surface but adhesives prepared with amidoamine curing agents with high amine numbers were not. Results obtained from XPS also showed that the amino groups on the substrate fracture surfaces of joints prepared using curing agents with low amine numbers were protonated whereas the amino groups in the bulk adhesive were not, indicating that there was a chemical interaction between the curing agent and the hydrated surface of the substrate. It was also shown using infrared spectroscopy that the amidoamine curing agents formed salts with calcium compounds in the oil.     

Separation and identification of phenolic acids and related compounds by gas chromatography and fourier transform infrared spectroscopy

Phenolic acids and related compounds were separated by gas chromatography using three separate columns. One of these columns was coupled to a Fourier transform infrared spectrometer. The trimethylsilyl derivatives could be separated and identified by comparing the relative retention times of the three different columns. However, where there was overlap, the accompanying infrared data clearly distinguished between the questionable derivatives, thus enabling characterization of all derivatives.The use of trade, firm, or corporation names in this article is for the information and convenience of the reader. Such use does not constitute an official endorsement or approval by the U.S. Department of Agriculture or the Forest Service of any product or service to the exclusion of others that may be suitable.     

All-glass system for preparative gas chromatography using capillary columns

A zero dead-volume all-glass-lined stainless-steel effluent splitter with a modified thermal gradient collector was designed for preparative gas chromatography using glass capillary columns. This system gives efficient collection of extremely pure samples of the 1-ng to 10-g range for spectral analysis and biological testing.Approved as TA 15656 by the director of the Texas Agricultural Experiment Station in cooperation with ARS, USDA. Supported by the Texas Department of Agriculture interagency agreement IAC-0487 (78-79).     

Exploring single electrode reactions in polymer electrolyte fuel cells

Utilising a pseudo-reference electrode in polymer electrolyte fuel cells allows for the separation of anodic and cathodic contributions to the entire cell impedance. Modelling the impedance responses by using equivalent circuits inhibits the investigation of kinetic parameters of the basic electrochemical reactions, which take place at single electrode-electrolyte interfaces. Therefore, we evaluate single electrode impedance measurements by a kinetic model, which is based on specific reaction pathways, either for the oxygen reduction reaction (ORR) or the hydrogen oxidation reaction (HOR). As a consequence, it is possible to obtain kinetic parameters for the specific reaction of interest. Furthermore, the information gained from the single electrode impedance measurements and the kinetic model can give insight into single reactions steps. In particular, the ORR has to include a chemical step in the reaction pathway.     

Raman spectroscopic study of conformational changes in the amorphous phase of poly(lactic acid) during deformation

The conformational distribution change of amorphous poly(lactic acid) (PLA) induced by deformation has been studied using Raman spectroscopy. Spectroscopic features associated with the rotational isomeric states (ttt, ttg′, tg′t, tg′g′) have been established experimentally and supported by normal coordinate analysis. Deformation induced a significant increase in the most favorable tg′t conformation. Based on the relative intensities of Raman-active skeletal modes, a quantitative method has been developed that can be used to elucidate structural changes in a variety of deformed polymer samples. For biaxially oriented PLA films, the overall tg′t conformation increased from the 76% in undeformed sample to a value as high as 92%. The change in conformational distribution in the amorphous phase follows a different trend (76-88%) as compared to the increase in sample crystallinity (0-43%). A large change in amorphous chain conformation occurred at relatively low draw ratios. In contrast, the large change in the degree of crystallinity occurred at higher draw ratios.     

Orientation and relaxation in uniaxially-stretched poly(2,6-dimethyl 1,4-phenylene oxide) — atactic polystyrene blends

Infra-red measurements of the dichroic ratio of atactic polystyrene and poly(2,6-dimethyl 1,4-phenylene oxide) absorption bands provide a valuable method for the determination of orientation as well as relaxation of chains of both polymers during stretching of their compatible blends. Influence of strain rate, temperature of stretching, and molecular weight of the polymers on orientation of both polymer chains in blends containing up to 35% PPO has been studied. Orientation relaxation for both polymers has been analysed using Lodge's constitutive equation. Master curves have been obtained for PPO and PS in the blends at a reference temperature T₀ = T_g + 10°C. Results are interpreted in terms of an hindrance of relaxation of PS chains induced by interaction with a highly-oriented PPO network which slowly relaxes.     

On the nature of the active state of silver during catalytic oxidation of methanol

Under the applied high reaction temperatures (900 K) the Ag surface is restructured and a tightly held oxygen species is formed on the surface (O) apart from O atoms dissolved in the bulk (O). Methanol oxidation to formaldehyde proceeds through this O species as demonstrated by application of a variety of spectroscopic techniques.     

Polyaniline for corrosion prevention of mild steel coupled with copper

Polyaniline emeraldine base/epoxy resin (EB/ER) coating was investigated for corrosion protection of mild steel coupled with copper in 3.5% NaCl solution. EB/ER coating with 5-10 wt% EB had long-term corrosion resistance on both uncoupled steel and copper due to the passivation effect of EB on the metal surfaces. During the 150 immersion days, the impedance at 0.1 Hz for the coating increased in the first 1-40 days and subsequently remained constant above 10⁹ Ω cm², whereas that for pure ER coating fell below 10⁶ Ω cm² after only 30 or 40 days. Immersion tests on coated steel-copper galvanic couple showed that EB/ER coating offered 100 times more protection than ER coating against steel dissolution and coating delamination on copper, which was mainly attributed to the passive metal oxide films formed by EB blocking both the anodic and cathodic reactions. Salt spray tests showed that 100 μm EB/ER coating protected steel-copper couple for at least 2000 h.