提高中高含水期油井压裂经济效益的方法

为提高葡北油田中高含水期油井压裂经济效益，合理选择压裂井层尤为重要。应用水驱特征曲线预测出油井压裂前可采储量，从而计算出剩余可采储量及可采储量采出程度，通过绘制油井压裂前剩余可采储量及可采储量采出程度与油井压裂后所创经济效益之间关系曲线，寻找出相关规律，进行优选压裂井，再根据精细地质研究成果，在剩余油富集区选择具体压裂层位。经实际应用，取得了较好效果，提高了油井压裂方案符合率，提高了经济效益，进而总结出一套适合葡北油田中高含水期油井压裂选井选层方法，对今后进一步搞好油井压裂增产工作具有指导意义。     

日产1000t水泥熟料生产线的提产措施

通过对五级旋风筒下料管、回转窑转速、配料方案、物料稳定等四方面进行改进,达到提产目的。     

安钢高线粗中轧机导卫设计特点

介绍了安钢自行设计的高线粗中轧机导卫装置的设计原则和特点。     

1270轧机弹性曲线的回归及参数估计

首先介绍了轧机弹性曲线的基础知识及 1 2 70轧机AGC系统的基本结构 ,然后论述了数据采集的方法 ,最后根据最小二乘法得到轧机弹性曲线的回归模型及刚度系数的实验结果。     

Performance variability is related to change in cognition: Evidence from the Victoria Longitudinal Study.

Performance variability across repeated task administrations may be an important indicator of age-related cognitive functioning. In the present investigation, the authors examined whether age differences and change in inconsistency were related to 6-year (3 occasion) cognitive change. Inconsistency scores were computed from 4 reaction time tasks performed by 446 older adults (54-89 years). Replicating previous cross-sectional results, greater inconsistency was observed for older participants even after controlling for differences in response speed. New longitudinal results demonstrated (a) associations between inconsistency at baseline measurement and 6-year change in cognitive performance; (b) longitudinal change in inconsistency; and (c) intraindividual covariation between 6-year change in inconsistency and 6-year change in level of cognitive function. These findings support the view that performance variability serves as a marker of cognitive aging. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Step response classification for model-based autotuning via polygonal curve approximation

A model-based autotuning method consists of an identification and a regulator tuning phase. To achieve satisfactory performance and robustness, it is advisable that both phases be tailored a priori to the characteristics of the observed process dynamics. Such characteristics include, but are not limited to, the model structure. For example, overdamped and underdamped models with the same pole-zero structure are parametrised and controlled in different ways. Step response data, that are typically used for the identification phase in the autotuning context, can also be pre-processed to reveal those characteristics. This paper presents a step response classification method suitable for the above purpose. The method is based on a polygonal curve approximation technique for data pre-processing, followed by a neural network classifier. Only normalised I/O data are employed, so that the neural network can be trained off-line with simulated data. Simulation results are reported to show the effectiveness of the proposed classification method in terms of the achievable tuning results.     

误读与纠正

分析材料试验机度盘偏转角度小 (准确度低 )、试样打滑、定义 (上屈服强度 -下屈服强度 -屈服强度 )模糊、不同应力速率等导致误读 ,并针对误读原因提出纠正方法。     

高精度智能转速测量模板的设计

介绍了一种利用高性能的16位单片机80C196KC进行转速实时高精度的测量方法，阐述了如何通过CAN总线实现与微机通讯；详细描述了硬件电路的设计，并给出了软件程序框图。     

砼受压损伤力学本构模型的研究

本文利用ＭＴＳ公司８１５．０２型电液伺服试验系统对砼进行了等应变速率加载控制的应力一应变全曲线试验，应用不可逆热力学和内变量理论的成果建立了砼损伤力学模型，并用概率统计的观点分析了损伤的演化规律。由于考虑了不可逆变形的影响，本文所建本构模型与实验吻合较好。     

高速转镜相机中倾斜光束的成象

本文通过建立几何模型 ,讨论了高速转镜相机光束倾斜入口的成象原理。证实了倾斜光束入口在转镜旋转时成象点的扫描轨迹是在以入射点为顶点 ,以成象点和入射点的连线为母线扫出的正圆锥底面的平面内 ,从而把空间光学的复杂设计问题简化成平面上的设计。此原理已用于 PDF- 2 0 0型平面转镜等待式分幅相机的设计