压力条件下淀粉合成甲基葡萄糖苷

以淀粉、甲醇为原料 ,以酸为催化剂 ,在压力条件下合成甲基葡萄糖苷 (简称甲苷 ) ,得出最佳催化剂是浓硫酸。通过正交实验 ,考察了糖醇比、反应压力、催化剂用量及反应时间对合成甲苷的影响 ,得到合成甲苷的最佳条件为n(淀粉 )∶n(甲醇 ) =1∶30 ,压力 0 5MPa ,催化剂用量为淀粉质量的 5 % ,反应时间 12 0min ,收率达 98 9%。     

Graft polymerization of vinyl acetate onto granular starch: Comparison on the potassium persulfate and ceric ammonium nitrate initiated system

This work was undertaken to discuss in depth the vital differences in the morphological development during synthesis, and properties of starch‐g‐poly‐(vinyl acetate) copolymers using two different initiators, potassium persulfate (KPS) and ceric ammonium nitrate (CAN). KPS‐initiated system gave relatively low values of grafting ratio and grafting efficiency, indicating a great tendency for the formation of poly(vinyl acetate) homopolymer (PVAc). Yet, higher values were seen for the CAN‐initiated system. Transmission electron microscope observations indicated a relatively broad distribution of latex particles for the KPS‐initiated system. The surface potential of latex particles was about ?3.5 mV, which turned out to be insufficient to maintain stability of latex particles. On the other hand, a uniform particle size distribution was found for the CAN‐initiated system, as the surface potential of latex particles was 21.5 mV. Moreover, radicals on starch molecules were generated directly through a redox reaction with positively charged ceric ion. The hydrophobic PVAc chains were thus grafted on starch, resulting in an amphiphilic graft copolymer, which provides a sufficient stabilization degree as a role of surfactant to render a relatively uniform distribution of latex particles. The synthesized starch‐g‐poly(vinyl acetate) copolymers were further converted to starch‐g‐poly(vinyl alcohol) through saponification, which were subjected to evaluations regarding the biodegradation and cell culture capability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3017–3027, 2006     

Anisotropy of X-ray structural parameters of the three phase model in cellulose I

Anisotropy of X-ray structural parameters of the three phase model proposed by Mitra and Mukherjee (ref.2), has been investigated in the case of cellulose fibres of ramie, hemp and jute. The structural parameters have been determined separately from each of the observable equatorial reflections. It has been found that the parameter degree of crystallinity as defined in the model is in fact anisotropic at least in the samples studied. The parameter degree of paracrystallinity introduced by Mitra and Mukherjee was also found to be anisotropic. Several important correlations between the structural parameters have been drawn. It has been observed, in agreement with the recent findings of Hosemann and Balta Calleja (ref.10) that the greater the paracrystalline distortion, the smaller the ‘paracrystallite size’.     

羧甲基淀粉研究进展

介绍了羧甲基淀粉的合成原理和方法，综述了淀粉的种类、溶剂、醚化剂、催化剂、反应时间和反应温度等因素对制备羧甲基淀粉的影响及最新的研究进展情况。     

冷冻交联制备ZM-CSt-PVA复合凝胶及吸附Cu2+性能

以两性离子单体二甲氨基丙基丙烯酰胺-1-羧酸(ZM)、木薯淀粉(CSt)和聚乙烯醇(PVA)为主要原料,采用"一锅法",通过冷冻交联制备ZM接枝共聚CSt-PVA互穿网络复合凝胶(ZPG2)。使用FTIR、TGA、POM、SEM-EDS对ZPG2进行了表征,评价了ZPG2对Cu~(2+)的静态吸附效果。结果表明:300℃以下,ZPG2的热稳定性良好;ZM的存在可产生反聚电解质效应和化学配位效应,显著提高凝胶吸附能力;在吸附温度25℃、ZPG20.1 g、Cu~(2+)质量浓度2×10~3 mg/L、溶液体积100 mL时,饱和吸附量为199 mg/g;吸附过程符合Langmuir等温吸附模型和准二级动力学模型。     

氧化淀粉变性基团的分析方法

介绍了淀粉工业中氧化淀粉变性基团羧基和羰基的测定方法     

尿素－双醛淀粉胶粘剂的制备

将改性淀粉代替甲醛与尿素进行缩合反应 ,合成出全新无毒的尿素 双醛淀粉胶粘剂。讨论了双醛淀粉与尿素的反应机理 ,并对二者反应的影响因素进行概括分析     

热塑性淀粉／聚己内酯共混物的制备和性能的初步研究

利用热塑性淀粉（TPS）与聚己内酯（PCL）熔融共混并挤出可用来制备完全可生物降解的塑料，研究表明，组分PCL以及增塑剂水和甘油的含量对体系的力学性能和耐水性有显著的影响。     

淀粉化工新进展

本文综述了国内外淀粉化工的发展概况，从氨基酸和有机酸、螯合物、羧甲基淀粉、淀粉塑料、淀粉基表面活性剂和淀粉粘合剂等６个方面评述了淀粉化工的新进展。提出以淀粉及水解产物、衍生物为原料，进行深度加工，开发一系列化工产品，是发展我国淀粉化工的重要途径之一。     

淀粉-聚乙烯醇可生物降解塑料研究进展

本文详细综述了近年来国内外淀粉基聚乙烯醇塑料的研究进展。