化学机械浆废水处理技术现状与发展

本文介绍了化机浆废水的来源及其污染特征,从预处理、生物处理和深度处理技术3方面综述了近年来国内外有关化机浆废水处理技术的研究现状与进展,对现有处理技术的优缺点和存在的问题进行了分析,并展望了化机浆废水处理技术的发展前景.     

光学方法检测牙髓活力

介绍了用光电体积描记器、脉冲血氧定量计、激光多普勒流量计等光电技术检测牙髓活力.对于中老年患者,牙龈中的血管比牙髓中发达,牙龈中产生的信号超过了牙髓,所以建立一种有效的光学探测途径相当困难.     

化学机械浆碱回收苛化绿泥的压榨处理

本文介绍了化机浆碱回收苛化绿泥的处理方法,分析了化学机械法APMP制浆和烧碱法制浆苛化绿泥的不同特点.用板框压滤机代替传统的卧式螺旋离心机处理苛化绿泥,处理后的绿泥干度能提高10％～13％,残碱降低3％～5％,纯固体碱回收量约增加2t/d.解决了绿泥干度低、黏稠等缺点,为绿泥的后续再利用提供了条件.     

小径落叶松材制作空间网架杆件的选择与设计

通过对小径落叶松材的力学性能、与金属套筒连接性能及胶粘剂的选择试验,设计用小径落叶松材制作空间网架,扩大了小径材在建筑领域的使用范围。     

Isolation and identification of high pressure‐resistant bacteria naturally contaminating strawberry pulp

The inactivation of bacteria naturally present in strawberry pulp was investigated after high hydrostatic pressure (HHP) treatment at pressure levels up to 600 MPa at 25 °C for 5 ~ 25 min. Five strains of pressure‐resistant bacteria designated as A, B, C, D and E were isolated and identified. The five strains were gram‐positive, spore‐forming, rods or rod in chains. Growth of the strains was observed at 30 ~ 45 °C, and strain B also grew well at 55 °C. They could produce acid from glucose and were catalase‐positive. Analysis of 16S rRNA gene sequences showed that the five strains belonged to the genus Bacillus. Strain A and D exhibited the greatest 16S rRNA gene sequence similarity of 99% with B. licheniformis and B. firmus, respectively. By combination of phenotypic characteristics and 16S rRNA gene sequences, strain C was B. mycoides and E was B. pumilus. On the basis of physiological and biochemical characteristics, gyrB gene sequences analysis and whole‐cell fatty acids analysis, strain B was B. amyloliquefaciens. Further studies showed that strain B (B. amyloliquefaciens) exhibited the highest pressure resistance, and it was reduced by 4.62‐log after treatment at 600 MPa for 25 min at 25 °C as the most effective observed inactivation.     

落叶松锯材抗弯强度尺寸效应

以兴安落叶松锯材为研究对象,研究了不同目测等级下锯材尺寸与其抗弯强度之间的关系.试验选取1961根6.5、9.0和14.0 cm3种宽度尺寸的目测等级锯材,每个宽度尺寸分为高、低目测等级组,按照每组试件宽度18倍的测试跨度测试锯材的抗弯强度.利用斜率法和形状参数法确定高、低目测等级组抗弯强度5％分位值的长度与宽度的组合尺寸效应.研究结果表明,斜率法获得高、低目测等级组试件抗弯强度5％分位值的组合尺寸效应分别为0.19和0.23.     

纸浆废液接枝共聚脂肪族减水剂的试验研究

对由纸浆废液制备的木质素磺酸盐与脂肪族减水剂接枝共聚合成木聚脂肪族减水剂进行了试验研究.通过红外光谱分析对减水剂分子共聚反应进行表征,按照单因素法进行工艺优化,确定了最佳合成工艺参数.性能测试结果表明,制得的木聚脂肪族减水剂具有良好的分散性和保塑性,综合性能优于脂肪族减水剂和物理复配减水剂.     

Comparative efficiency of maltodextrin and protein in the production of spray-dried tamarind pulp powder

The potential of maltodextrin (DE 20) and soya protein isolate (SPI) in spray drying of tamarind pulp was compared. Powder recovery was zero when the tamarind pulp was spray dried alone. A greater amount of maltodextrin (MD; 55%) was required for successful spray drying of tamarind pulp, whereas a small amount of SPI (20%) was needed for the same purpose. The study revealed that the mechanism for the increase in product recovery with the addition of MD is due to the increase in overall glass transition temperature of tamarind pulp powder. However, using SPI, preferential migration of the protein to the surface of droplets/particles resulting in the formation of a glassy skin was responsible for a reduction in stickiness between the particles and dryer wall and hence increased the powder recovery. The potential of SPI in reducing powder hygroscopicity was almost comparable to that of MD, confirming its efficiency as a drying aid. Tamarind pulp powders produced with SPI had a larger particle size with a wrinkled particle surface morphology and high flowability compared to powders produced with MD. The study showed the excellent potential of SPI as a drying aid in production of quality tamarind pulp powder.     

Selecting the Pre-Hydrolysis Conditions for Eucalyptus Wood in A Fractional Exploitation Biorefining Scheme

The operating conditions for the autohydrolysis of eucalyptus wood were optimized with a view to maximizing hemicellulose extraction while preserving the integrity of glucan. The influence of the operating conditions used in the soda–anthraquinone pulping of the solid phase resulting from the autohydrolysis process was examined. Autohydrolysis of the raw material at a liquid/solid ratio of 8 kg water/kg material at 180°C for 30 min was found to provide a commercially useful liquid phase containing most of the starting hemicellulose. The autohydrolysis treatment allowed the subsequent production of soda–anthraquinone cellulose pulp and paper with properties as good as or even better than those obtained without the pretreatment.     

Organochlorine Formation in Tertiary Amine Catalyzed Pulp Bleaching

An oxygen delignified eucalyptus kraft pulp was bleached by applying a catalytic amount of a tertiary amine, 1,4-diazabicyclo[2,2,2]octane, and hypochlorous acid at varying pH, temperature, and time. The bleaching filtrate was analyzed for chloroform and AOX and the pulp for residual lignin, hexenuronic acid, and OX. In comparison with chlorine dioxide bleaching, the novel catalytic bleaching (pH < 6) generated only traces of chloroform and low contents of AOX and OX. Separate catalytic oxidations of authentic hexenuronic acid showed that it was a major precursor of chloroform. The results demonstrate a practical way to reduce organochlorine formation in pulp bleaching and provide new understanding on the reaction pathways that yield chloroform.