Preparation of (S)‐ibuprofen‐imprinted polymer and its molecular recognition study

Two molecularly imprinted polymers (MIPs) were prepared using (S)‐ibuprofen as the template molecule as well as methacrylic acid (MAA) or 4‐vinylpyridine and ethylene glycol dimethacrylate (EGDMA) as the functional monomer and crosslinker, respectively. Free radical polymerization was carried out at 4°C under ultraviolet (UV) radiation. The MIPs thus obtained were ground into 25–44 μm, which were slurry packed into analytical columns. The template molecules were removed by acetic acid/methanol solution (1:9, v/v). high‐performance liquid chromatography (HPLC), with UV detection, was used to evaluate the binding performance of the MIP for the template. The selectivity of (S)‐ibuprofen and naproxen on the host–guest system were assessed using acetonitrile‐based mobile phases. The limits of detection of ibuprofen and naproxen were found to be 0.1844 mmol/L and 0.3264 mmol/L, while the limits of quantitation were 0.6262 mmol/L and 1.0909 mmol/L, respectively. The stationary phase was applied successfully to the commercial tablet analysis. Ibuprofen and naproxen were extracted from tablets with acetonitrile; analysis results showed a good relative standard deviation (RSD) of 0.81–1.24% and accuracy from ?4.01 to +2.98% for ibuprofen as well as an RSD of 0.59–0.86% and accuracy from ?4.01 to ?2.01% for naproxen. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2972–2979, 2006     

Using an experimental design to identify and quantify the effects of environment related test parameters on the in vitro mucoadhesivity testing of a propanolol buccal tablet

This study sought to identify and quantify the effects of environmental test parameters on the mucoadhesivity of a propranolol tablet. Their effects on Maximum Detachment Force (MDF) measurements were evaluated using a Box-Behnken design matrix. Prehydration time (PT) had a statistically significant negative main effect while contact force (CF) had no significant effect on in vitro MDF measurements. While contact time (CT) had no significant main or quadratic effects, it had a positive interaction effect with PT. The mathematical model was statistically validated and a PT of 3.5 min and a CT of 5 min was proposed for mucoadhesion testing by the tensile method during formulation optimization.     

Water Soluble Cellulose Acetate: A Versatile Polymer for Film Coating

ABSTRACT

The objective of this study was to investigate the use of water soluble cellulose acetate (WSCA) as a film coating material for tablets. Aspirin (ASA) tablets were prepared by direct compression and coated with either WSCA or HPMC (hydroxypropyl methylcellulose) dispersions. Coatings of 1–3%, depending on the intended application, were applied to the model drug (ASA) tablets employing a side-vented coating pan. Free films of WSCA, prepared by cast method, are crystal clear and, depending on the viscosity grade, are flexible, strong and durable. WSCA has the capability of forming free films without plasticizers and the films dry at room temperature. Glass transition temperature, Tg, was determined by differential scanning calorimetry. The Tg of WSCA is significantly higher relative to HPMC. Inclusion of plasticizer lowers the Tg of WSCA and effective plasticizers were PEG 400 and glycerin. Low viscosity WSCA was more soluble in water (25–30%) relative to medium viscosity WSCA (10–15%). WSCA solutions exhibited no increase in viscosity with an increase in temperature. Samples of coated (WSCA and HPMC) tablets and uncoated ASA cores were packaged for stability studies at room and elevated temperature storage. Physical stability of ASA tablets coated with 2:1 LV: MV (low viscosity: medium viscosity) WSCA formulations was better when compared to tablets coated with HPMC. Dissolution stability of WSCA coated ASA was similar to the physical stability results. After three months at elevated temperature (35 and 45°C), the WSCA coated tablets complied with USP dissolution requirements for ASA, while the HPMC coated tablets did not. There was no difference in moisture (weight) gain of ASA tablets coated with either WSCA or HPMC. The WSCA coated tablets were not sticky or tacky, while the HPMC coated tablets were tacky and stuck together.     

Investigations of a Novel Self-Emulsifying Osmotic Pump Tablet Containing Carvedilol

Carvedilol has been made into a novel osmotic pump tablet which includes Gelucire 44/14, Lutrol F68, Transcutol P, silicon dioxide, mannitol, citric acid, and sodium hydrogen carbonate. The Self-emulsifying osmotic pump tablet (SEOPT) has two outstanding features. It could improve the bioavailability of carvedilol by self-emulsifying drug delivery system (SEDDS), control the release rate and make the plasma concentrations more stable by elementary osmotic pump tablet. The results of transmission electron microscope (TEM) and particle size assessment showed that the shape of the resultant emulsion was round and regular, the average diameter of the particles was 246 nm. Since the solubility of carvedilol was improved by the emulsion, the elementary SEOPT could guarantee a complete release of carvedilol under the osmotic pressure of mannitol. The cumulative release at 12 hr was 85.18%. Therefore the disadvantage that lipophilic drugs can not be released completely when prepared into elementary osmotic pump tablet was resolved. The results of Differential scanning calorimetry (DSC), Infrared spectroscopy (IR) and X-ray diffraction diffraction (XRD) proved that carvedilol was amorphous in the preparation. The relative bioavailability of carvedilol in beagle dogs was 156.78%. The plasma concentrations were more stable compared with that of commercially available tablet (Luode®). And the in vitro and in vivo correlation was good (r = 0.9725). Therefore, the elementary SEOPT developed in this paper might provide a new idea for preparing lipophilic drugs into osmotic pump tablet conveniently.     

Fabrication and in vitro evaluation of bidirectional release and stability studies of mucoadhesive donut-shaped captopril tablets

Objective: To obtain controlled release of captopril in the stomach, coated, mucoadhesive donut-shaped tablets were designed.

Materials and methods: Donut-shaped tablet were made of different ratios of diluents to polymer or combination of polymers by direct compression method. Top and bottom portions of the tablet were coated with water-insoluble polymer followed by mucoadhesive coating. Time of water penetration, measurement of tensile strength, mucoadhesion studies (static ex vivo and ex vivo wash-off) were taken into account for characterization of respective films. In vitro study has been performed at different dissolution mediums. Optimized batches were also prepared by wet granulation. Stability studies of optimized batches have been performed.

Results: The results of time of water penetration and tensile strength indicated positive response against water impermeation. Mucoadhesive studies showed that film thickness of 0.12?mm was good for retention of tablet at stomach. At pH 1.2, optimized batch of tablet made with hydroxypropyl methyl cellulose (HPMC) E15 as binder showed 80% w/w drug release within 4–5?h with maximum average release of 97.49% w/w. Similarly, maximum average releases of 96.36% w/w and 95.47% w/w were obtained with nearly same dissolution patterns using combination of HPMC E5 and HPMC E50 and sodium salt of carboxy methyl cellulose (NaCMC) 500–600 cPs instead of HPMC E15. The release profiles in the distilled water and pH 4.5 followed the above pattern except deviation at pH 6.8. Stability studies were not positive for all combinations.

Conclusion: Coated, mucoadhesive donut-shaped tablet is good for controlled release of drug in the stomach.     

Evaluation of Monolithic Osmotic Tablet System for Nifedipine Delivery In Vitro and In Vivo

Abstract

The aim of this study was to evaluate the monolithic osmotic tablet system (MOTS) containing a solid dispersion with the practically water-insoluble drug nifedipine in vitro and in vivo. In the drug release study in vitro, the release profiles of this system had almost zero-order kinetics. The influences of tablet formulation variables, sizes of the delivery orifice, membrane variables, and values of pH in the dissolution medium on nifedipine release from MOTS have been investigated. The results provided evidence that the tablet core played an important role in MOTS. While orifice sizes and membrane variables affected the nifedipine release rate, MOTS was independent of the dissolution medium. The appropriate orifice size was found to be in the range of 0.5–1.0 mm. The coating membrane incorporating hydrophilic polyethylene glycol (PEG) formed a porous structure. The human pharmacokinetics and relative bioavailability of MOTS containing nifedipine were compared with a commercial Adalat® osmotic tablet system containing an equivalent dose of nifedipine following an oral single dose of 30 mg given to each of 11 healthy volunteers in an open, randomized crossover study in vivo. The relative bioavailability for MOTS was 112%. There was no statistically significant difference in the pharmacokinetic parameters between two dosage forms. It is concluded that the monolithic osmotic tablet controlled release system is feasible for a long-acting preparation as a once-daily treatment.     

Preparation and in vivo evaluation of spray dried matrix type controlled-release microparticles of tamsulosin hydrochloride for orally disintegrating tablet

The objective of this study was to achieve an optimal formulation of spray dried matrix type controlled-release (MTCR) microparticles containing tamsulosin hydrochloride for orally disintegrating tablet. To control the release rate of tamsulosin hydrochloride, Acrylate-methacrylate copolymer (Eudragit^® L-100 or Eudragit^® S-100) and ethylcellulose were employed on the composition of MTCR microparticles. Physicochemical properties of MTCR microparticles such as particle size and SEM were characterized. Pharmacokinetic parameters of tamsulosin hydrochloride were evaluated in the rats after oral administration. MTCR microparticles were spherical microparticles of around 10 µm diameter with a corrugated surface. ODTs containing MTCR microparticles were disintegrated within 30 s and MTCR microparticles were able to control the release rate of tamsulosin hydrochloride following Fickian diffusion mechanism. The in vitro release rates of tamsulosin hydrochloride from MTCR microparticles were proportional to the ratio of Acrylate-methacrylate copolymer to ethylcellulose. Moreover, MTCR microparticles retarded the in vivo release rate of tamsulosin hydrochloride without reducing the bioavailability. Our results suggest that MTCR microparticles may be potential oral dosage forms to control the release and to improve the bioavailability of tamsulosin hydrochloride.     

Pilot Study of Relative Bioavailability of Two Oral Formulations of Ketoprofen 25 mg in Healthy Subjects. A Fast-Dissolving Lyophilized Tablet as Compared to Immediate Release Tablet

ABSTRACT

The pharmacokinetics of ketoprofen from a fast-dissolving lyophilized tablet (LT), which need not be swallowed, as compared to an immediate release (IR) tablet as reference after single oral dose (25 mg) administration was determined in six healthy subjects aged between 25–40 years using a randomized crossover design. In this study, the rate and extent of absorption of ketoprofen were found to be very different after administration of the LT and the IR tablet. The rate of absorption of ketoprofen from LT was significantly faster than that of IR tablet and had significantly higher C_max (by about 50%) and earlier t_max (by 15 min), whereas the extent of absorption expressed by AUC was about 68% higher as compared to the IR tablet. The relative bioavailability (f_rel) of the LT compared with the IR tablet was 168%. The difference between the two formulations for half-life and MRT were statistically significant (p < 0.05). The tolerance of the two tested formulations was excellent. Ketoprofen LT remained physically and chemically stable for 12 months at 25°C and 60% relative humidity.     

Preparation and In Vitro Evaluation of Controlled Release Hydrophilic Matrix Tablets of Ketorolac Tromethamine Using Factorial Design

Controlled release matrix tablets of ketorolac tromethamine (KT) were prepared by direct compression technique using cellulose derivatives as hydroxypropylmethyl cellulose (HPMC), hydroxyethyl cellulose (HEC), and carboxymethyl cellulose (CMC) in different concentrations (10–20%). The effect of polymer type and concentration was investigated on drug release by 2³ factorial design. For the quality control of matrix tablets, weight deviation, hardness, friability, diameter–height ratio, content uniformity of KT, and in vitro dissolution technique were performed. UV Spectrophotometric method was used to detection of KT in matrix tablets. This method was validated. Dissolution profiles of the formulations were plotted and evaluated kinetically. An increase in polymer content resulted with a slow release rate of drug as was expected. According to the dissolution results, tablets prepared with HPMC + HEC + CMC (F1 and F8) were found to be the most suitable formulation for KT. About 99.27% KT was released from F8 in 7 h.     

Possible Mechanism for Drug Retardation from Glyceryl Monostearate Matrix System

Lipophilicity was evaluated as a possible mechanism for drug retardation from a glyceryl monostearate matrix system. Lipophilicity of the glyceryl monostearate matrix system was studied using contact angle measurement of water droplets on the surface of compressed disks, extrudate ascension of water, and movement of water through a powder mixture packed in a high-performance liquid chromatographic (HPLC) column. Increase in glyceryl monostearate content resulted in an increase in water droplet contact angle, decrease in the rate of water ascending the extrudate, and increase in the pressure values as a function of flow rate of water moving through the powder mixture. These could be due to the increase in lipophilicity of the matrix, rendering the matrix less wettable. As a result, the rate of water penetration into the matrix decreased, and the drug release could be sustained.