抗缺氧中藏药微量元素的对应分析

应用对应分析研究抗缺氧中藏药中微量元素Co、Cr、Cu、Fe、Mg、Mn、Ni and Zn的分布特征。该方法可用于直接处理抗缺氧中藏药样品元素分析的数据,以研究地奥心血康、红景天胶囊、安神散、五味石榴散、章松八味沉香散、十六味杜鹃散、二十五味余甘子丸、二十五味竹黄胶囊、十五味龙胆丸、秘诀清凉散、七十味珍珠丸、八味沉香散、六味丁香散、七味葡萄散等中藏药的品质与它们的微量元素组成和样品来源的关系。将样品点和微量元素变量反映到同一因子轴的图形上,并且分类,能够揭露出样品来源与变量之间的内在联系,中藏药中人体必需的微量元素Fe、Mg、Co、Cu、Mn和Ni等含量比较高,与药物疗效密切相关,为研制新型的具有微量元素优势的药物提供科学的依据。     

用地震速度反演重建声波曲线

由于受地震仪器观测精度及计算机处理能力的限制,地震反演的速度曲线所能达到的分辨率能力,不能满足勘探目标的需要（例如,１０ｍ以内的薄互层反演）。现设想地层沉积结构分形的特征,则可通过分形计算求得速度变化细节,尽可能地逼近实测的声波曲线。我们将这种由地震速度反演曲线进行分形计算的结果称为“重建的声波曲线”。通过对实际资料的试算表明,在声测资料较理想的情况下,重建的声波曲线与实测的声波测井曲线有很好的相     

基于自适应方向模板搜索的 FPC 走线薄浆检测

本文薄浆是柔性印刷电路板(FPC)导电涂层的一种缺陷,为避免其对电路性能产生不良影响而造成经济损失,将薄浆 位置检测出来进行修补或直接剔除板材均是合理的处理方式。 然而由于薄浆缺陷尺寸不定、光照不均致使图像灰度分布不均 匀、走线区域与背景纵横交错等问题,使得走线上薄浆的检测具有一定难度。 针对该问题,在对薄浆纹理及 FPC 走线形态特征 进行详细分析的基础上,提出了一种基于自适应方向模板(ADT)和灰度差分法的检测方案。 首先,使用定义的 ADT 模板按照 骨架跟踪流程对预处理所得图像的走线区域进行遍历,分别搜索相对于该 ADT 模板尺寸而定义的大、小尺度薄浆纹理的端部 和全部候选像素,从而将预处理图像分割成若干小区域;然后,根据各小区域的能量倾向值与预设阈值的数值关系对其中的边 缘噪声区域加以排除;最后,采用灰度差分法对上述两个步骤处理所得结果中的非缺陷区域进行再次筛查,从中提取出大尺度 薄浆纹理的中间区域,至此实现全部薄浆纹理的检测。 在自建图库 SUT-F2 上进行了测试,结果显示本文方法对薄浆缺陷检测 的等误率仅为 3. 92%,相对于其他典型纹理特征提取和薄浆检测方法其等误率至少降低了 5. 28%,表明了本文方法的高效性, 具有实际应用价值。     

界面聚合-原位制备聚吡咯/CdS纳米复合材料及其非线性光学性能

为了提高聚吡咯(PPy)的光电性能,通过界面聚合-原位法制备了PPy/Cd S复合薄膜材料,用红外光谱、X射线衍射、扫描电镜、热重分析等方法对产物进行了表征。制备的PPy/Cd S薄膜结构平整,投料比对Cd S纳米棒尺度有明显影响。用紫外吸收、Z-扫描技术初步研究了PPy/Cd S的非线性光学(NLO)性质。PPy/Cd S具有明显的饱和吸收和非线性负折射。PPy/Cd S(摩尔比10∶1)薄膜的非线性折射率是PPy薄膜的2.4倍,三阶非线性极化率是PPy的2.1倍,说明PPy/Cd S薄膜具有良好的三阶NLO性能。该复合材料在光限幅等光电领域具有潜在的应用价值。     

Hierarchical CdS Nanorod@SnO2 Nanobowl Arrays for Efficient and Stable Photoelectrochemical Hydrogen Generation

An efficient photoanode based on CdS nanorod@SnO₂ nanobowl (CdS NR@SnO₂ NB) arrays is designed and fabricated by the preparation of SnO₂ nanobowl arrays via nanosphere lithography followed by hydrothermal growth of CdS nanorods on the inner surface of the SnO₂ nanobowls. A photoelectrochemical (PEC) device constructed by using this hierarchical CdS NR@SnO₂ NB photoanode presents significantly enhanced performance with a photocurrent density of 3.8 mA cm^?2 at 1.23 V versus a reversible hydrogen electrode (RHE) under AM1.5G solar light irradiation, which is about 2.5 times higher than that of CdS nanorod arrays. After coating with a thin layer of SiO₂, the photostability of the CdS NR@SnO₂ NB arrays is greatly enhanced, resulting in a stable photoanode with a photocurrent density of 3.0 mA cm^?2 retained at 1.23 V versus the RHE. The much improved performance of the CdS NR@SnO₂ NB arrays toward PEC hydrogen generation can be ascribed to enlarged surface area arising from the hierarchical nanostructures, improved light harvesting owing to the NR@NB architecture containing multiple scattering centers, and enhanced charge separation/collection efficiency due to the favorable CdS–SnO₂ heterojunction.     

Two‐phase trace‐driven simulation (TPTS): a fast multicore processor architecture simulation approach

Simulation is indispensable in computer architecture research. Researchers increasingly resort to detailed architecture simulators to identify performance bottlenecks, analyze interactions among different hardware and software components, and measure the impact of new design ideas on the system performance. However, the slow speed of conventional execution‐driven architecture simulators is a serious impediment to obtaining desirable research productivity. This paper describes a novel fast multicore processor architecture simulation framework called Two‐Phase Trace‐driven Simulation (TPTS), which splits detailed timing simulation into a trace generation phase and a trace simulation phase. Much of the simulation overhead caused by uninteresting architectural events is only incurred once during the cycle‐accurate simulation‐based trace generation phase and can be omitted in the repeated trace‐driven simulations. We report our experiences with tsim, an event‐driven multicore processor architecture simulator that models detailed memory hierarchy, interconnect, and coherence protocol based on the TPTS framework. By applying aggressive event filtering, tsim achieves an impressive simulation speed of 146 millions of simulated instructions per second, when running 16‐thread parallel applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Modelling concurrency with comtraces and generalized comtraces

Comtraces (combined traces) are extensions of Mazurkiewicz traces that can model the “not later than” relationship. In this paper, we first introduce the novel notion of generalized comtraces, extensions of comtraces that can additionally model the “non-simultaneously” relationship. Then we study some basic algebraic properties and canonical representations of comtraces and generalized comtraces. Finally we analyze the relationship between generalized comtraces and generalized stratified order structures. The major technical contribution of this paper is a proof showing that generalized comtraces can be represented by generalized stratified order structures.     

Least trace extended set-membership filter

To improve the consistency of estimation result, a least-trace extended set-membership filter (LTESMF) is presented for a class of nonlinear stochastic systems, which has linear output and unknown- but-bounded noise. Feedback technique is used instead of the intersection of ellipsoid-sets in the measurement update. The feedback parameter is optimized in order to minimize the trace of error bounded ellipsoid’s envelop matrix. A new stability analysis method was developed to prove the stochastic system’s stab...     

一种支持历史航迹和预查询的动目标索引方法

随着目标检测技术和传感器网络技术的发展,高效的目标信息索引方法可以提高系统性能和稳定性.因此,提出了一种动目标索引方法SSTR-tree,能将历史索引和预测索引结合,实现全时态查询,具有较高的更新、查询效率;通过设置有效时间段索引,对无效时间段内信息只记录目标突变信息,提高了动目标航迹管理的效率.通过实验证明,与传统的哈希存储和3 DR-tree索引方法相比较,SSTR-tree动目标索引方法更新和查询效率更优.     

嵌入式Linux内核运行态性能可视化分析方法的设计与实现

介绍了嵌入式Linux操作系统下的一种内核运行态可视化性能分析方法.它采用Linux的字符设备驱动技术,Linux内核源代码内的探针嵌入以及内核补丁技术,基于Socket的Linux端与Windows端的TCP通信技术和Windows端的图形化显示技术,以模块化方式实现了在Windows宿主操作系统下对Linux操作系统运行时系统事件状态变化的图形化地观察手段,从而辅助软件开发人员方便地去诊断和解决嵌入式Linux系统中存在的调度问题、性能问题以及定时问题等.