基于GM（1，1）校正模型的转折性电力负荷特性预测

电力负荷系统是典型的灰色系统，电力负荷特性指标的预测具有直接的经济意义．讨论了当预测对象系统存在转折性变化时，灰色预测校正模型在此方面的有效应用．该模型具有充分利用历史信息而且短期预测精度高的优点．     

对低压锅炉改造的探讨

本文针对贵溪冶炼厂 4 # 低压锅炉的现状 ,从技术、运行成本、改造费用等几个方面进行比较 ,提出了有针对性的改造方案。     

数控车床加工效率的优选研究

以齿轮零件为例,介绍了数控车床加工时对怎样合理安排加工顺序,走刀路线、刀具的选择及切削要素的确定进行了分析,对在数控车床上加工类似零件有一定的参考价值。     

热喷涂焊层车削加工工艺的探讨

本文针对轴类热喷涂焊层中喷涂层、喷焊层的车削加工工艺进行分析 ,从设备调整、刀具牌号选择、刀具几何参数选择三个方面进行研究 ,对加工工艺进行改进 ,在实际生产中具有一定的价值     

弹性宽刃精车刀与细长轴的加工

介绍了自制弹性宽刃精车刀对细长轴进行加工,以及加工工艺和加工中要注意的若干问题.     

铲齿成形铣刀“成形”问题的探讨

分析了铲齿成形铣刀用钝重磨后铣刀廓形的变化情况 ,推导了铲磨成形铣刀重磨后的齿形计算公式 ,指出此类铣刀重磨后其设计廓形将发生变化 ,并提出用调整刀具前角的方法对齿形重磨误差予以补偿     

Simulation and measurement of surface roughness via grey scale image of tool in finish turning

Study on the surface roughness of specimen is a significant field of research because this parameter affects the performance of the machined parts. Meanwhile, the evaluation of surface roughness of specimens using a vision system via the images captured from the specimen is an interesting method which is widely used. Although the effect of flank and crater wear has been investigated extensively in the past researches on surface profiles, some reports indicated that, in finish turning, the nose radius wear has a greater effect on the surface profile of specimen. Although, vibration can affect the surface profile of a specimen in rough turning, the final surface profile in the product used is usually shaped by finish turning that may not be affected by vibration using the robust machine tool. In this work, a machine vision was used to capture the images of the tool tip in-cycle. The 2-D images of the nose area of tool tips were used to simulate the surface profile of specimens in finish turning. The simulated images of specimens in a range of machining condition were detected using the algorithm of this work. The results showed that this method can be used successfully to simulate and evaluate the surface profile of a specimen in finish lathe machining as a fingerprint of the tool tip. This method can be used for forecasting the final surface profile in order to control the performance of products.     

The numerical calculation of topological turning points

We introduce the definition of topological turning point of a function ?(x, λ): ?×?→?, then we propose a numerical method for calculating it. This new definition does not require any regularity for ? but its continuity; moreover, topological turning point coincides with turning point when ? is sufficiently smooth. The numerical method that we introduce has linear rate of convergence, and it is of secure convergence.     

基于FANUC系统的双曲线宏程序编制与加工解析

建立双曲线函数变量表达式模型,探索双曲线宏程序的编制方法,并对基于FANUC系统的双曲线数控车削宏程序编制做了实例解析,为深入研究数控机床双曲线宏程序的编制与加工打下基础。     

The effect of minimum quantity lubrication in the intermittent turning of magnesium based on vibration signals

The present work shows an experimental investigation on intermittent turning based on vibration signals. The dependence of vibrations on the feed rate, minimum quantity lubrication (MQL) flow rate and the type of the interruption of the workpiece is evaluated. The results indicate that a part of the vibrations depends on the flow rate of the MQL system and its interaction with the feed rate, finding no dependency on the type of interruption. The influence of the MQL system is greater when machining at the lower feed rate. In addition, a strong relation between surface roughness and vibrations is identified. However, this relation is quite different depending on the environment used. In general, under dry conditions, the higher the vibrations the higher the surface roughness, while the opposite occurs when the MQL system is used.