Cr12钢的预处理工艺研究

本文研究了Ｃｒ１２钢经４种不同的预处理工艺处理后钢中碳化物的大小，数量，分布及钢的硬度，强度和韧性，试验结果表明，经调质处理，高温固溶淬火＋高温退火处理后，Ｃｒ１２钢中碳化物的大小，分布及其组织，性能均优于常规球化退火预处理的。通过扫描电镜对冲击断口的分析，初步探讨了新的预处理工艺提高韧性的原因。     

快速凝固高碳铁基合金脉冲激光非平衡热处理

利用脉冲Ｎｄ：ＹＡＧ激光辐照对快速凝固高碳铁基合金进行非平衡相变热处理，发现在高能脉冲激光辐照时，原快速凝固共晶碳化物（Ｆｅ３Ｃ）异常迅速地石墨化，获得了含超细石墨球和既含超细石墨球又含快速凝固共晶Ｆｅ３Ｃ的两种新材料，研究表明，这种快速石墨化及上述两类新型材料的形成主要归因于脉冲激光光速辐照产生强烈周期性起伏温度场的“微退火（ｍｉｃｒｏ－ａｎｎｅａｌｉｎｇ）效应。     

Responses of practicing psychologists to a web site developed to promote empirically supported treatments.

Increased adoption of empirically supported treatments (ESTs) has been hindered in part by inadequate and inconvenient access to EST information and training. To improve diffusion of ESTs, the authors developed a Web application to provide practitioners with concise information by disorder on ESTs. The resulting site, therapyadvisor.com, was evaluated by 239 practicing psychologists to assess the usefulness of the site and explore possible interactions of EST attitudes on ratings of usefulness and impact. Two thirds of participants indicated using ESTs in practice, and limited time and resources were cited as primary barriers to EST adoption. The Web application was rated positively by most participants and was reported to increase awareness of and commitment to try ESTs among approximately 60% of participants. The results of this project support the feasibility of a Web application to increase diffusion and promote further adoption of ESTs. Technological and e-learning advances are promising directions for encouraging the adoption of ESTs specifically and evidence-based practice generally, particularly among busy practitioners who have inadequate time and resources for more traditional forms of dissemination and training. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

-50℃用20MnMoD钢锻件及其焊接接头性能

研究了-50℃的20MnMoD钢锻件及其焊接接头在不同热处理状态时的综合力学性能。结果表明,-50℃的20MnMoD钢锻件具有良好的低温韧性,可与-50℃级正火型低温压力容器钢15MnNiNbDR配套使用。     

Predictors of outcome in LAAM, buprenorphine, and methadone treatment for opioid dependence.

This study examined (1) predictors of treatment outcome for opioid-dependent participants in a single-site controlled trial comparing methadone, buprenorphine, and LAAM treatments and (2) the extent to which various subpopulations of patients may have more successful outcomes with each medication. The relationships between patient demographics, drug use history, and psychological status and outcome measures of treatment retention, opiate use, and cocaine use were assessed. We believe this study to be the first to demonstrate that predictors of treatment success appear to be largely similar in LAAM, buprenorphine, and methadone treatment for opioid dependence. We did not find any factors that would strongly guide selection of one medication over others. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Evaluating Ozone as a Remedial Treatment for Removing RDX from Unsaturated Soils

Years of wastewater discharge at the Department of Energy’s Pantex Plant have contaminated the vadose zone and underlying perched aquifer with hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). Because the vadose zone is acting as a continual source of groundwater contamination, removing RDX from the unsaturated zone is paramount to prevent further contamination. We determined the efficacy of ozone to degrade and mineralize RDX. Solution experiments showed that ozone (27?mg?L?1; 150?mL?min?1) was effective in mineralizing 80% of the RDX (30?mg?RDX?L?1) provided that some Pantex soil was present to buffer the solution pH. Soil columns treated with ozone produced 50% RDX mineralization within 1 day and >80% within 7 day. Experiments designed to evaluate aerobic biodegradation following partial ozonation of a RDX solution showed that ozone-generated RDX products were much more biodegradable than untreated controls in aerobic microcosms (35 versus <0.3% cumulative mineralization). These results support the use of ozone as a remedial treatment for the contaminated vadose zone at the Pantex facility.     

Ultrasound‐activated Knoevenagel condensation of malononitrile with carbonylic compounds catalysed by alkaline‐doped saponites

α,β‐Unsaturated nitriles have been synthesized by Knoevenagel condensation of a carbonylic compound with malononitrile, assisted by sonochemical irradiation. Two alkaline‐promoted clays (Li⁺‐ and Cs⁺‐exchanged saponites) have been employed as catalysts. The influence of the carbonylic compound (benzaldehyde or cyclohexanone) and the use of a solvent on the catalytic activity have been studied. Remarkable increase in the conversion values has been found when the reaction is activated by ultrasound, as compared with the thermal activation. In this green, solvent‐free procedure, α,β‐unsaturated nitriles have been produced in very high yields (97%) when the Cs⁺‐saponite is used as catalyst. Copyright © 2004 Society of Chemical Industry     

基于数字运算的PSD调理电路设计

介绍了基于数字运算的PSD调理电路思想及具体线路构造,该电路避免了模拟运算的缺陷,提高了精度和可靠性.     

真空技术在污水处理中的若干典型应用

介绍了真空技术在污水处理中的几种典型应用，真空结晶法在以分离污水中具有结晶性能的固体溶剂；真空过滤脱水用于初沉池和消化池污泥脱水，真空浮选法通过制造负压条件加速浮选过程；还有真空搅拌、真空脱气等等。这些足以说明真空技术在污水处理乃至环境保护中占有重要的一席之地。     

可节约生产成本的湿处理工艺技术

从传统意义上来讲，针织物及对张力敏感的梭织物的湿处理生产线（包括漂白、染色、柒色后水洗）通常是利用染缸来完成的，而这正是高水耗、高蒸汽消耗和高能源消耗的症结所在，同时带来一些质量问题（如折痕、起毛球和刮印等）。随着现代连续式平幅湿处理线技术的发展，整体生产成本可以下降到最多这50％。介绍了德国欧宝泰克生产的敏感织物连续式平幅湿处理线设备。