Synthesis and characterization of aerogel-like mesoporous nickel oxide for electrochemical supercapacitors

Highly porous NiO was prepared via a combination of sol-gel process with supercritical drying method in this paper. The as-synthesized NiO samples exhibit 80–90% porosity and high surface area, ie, 180.5–325.6 m²g⁻¹. Cyclic voltammetric and chronopotentiometric measurements indicated the aerogel-like NiO in 1 mol.L⁻¹ KOH solution to behave capacitive well due to its uniform mesoporous microstructure. It was also observed that post-heating temperature plays a critical role in the mesoporous nature of the aerogel-like materials. An optimal heating temperature of 300^∘C was found to favor the formation of mesopores, which account for the large specific capacitance of as high as 125 F.g⁻¹. The average specific capacitance of the aerogel-like NiO was observed to be about 75–125 F.g⁻¹ between a potential window of 0–0.35 V vs. SCE.     

Thermal properties measurements of renatured gelatin using conventional and temperature modulated differential scanning calorimetry

The thermal properties of amorphous gelatin films and gelatin films with renatured structural order were measured by using conventional and temperature modulated differential scanning calorimetry (DSC). Different amounts of gelatin structural order associated with a melting enthalpic change in the DSC measurement were prepared based on different gelatin drying conditions. Two consecutive heating and cooling DSC measurements on the gelatin films showed that there was no change in the glass‐transition temperature (T_g) for the amorphous gelatin but there was a decrease in the T_g for the structural gelatin on the second DSC scan. This decrease was attributed to the plasticizing effect from the release of originally hydrogen‐bonded water associated with the structural gelatin. In addition, a reversing endotherm observed upon melting of the structural gelatin during a temperature modulated DSC measurement indicated that the transition of bound water to free water occurred as the partial triple‐helix gelatin melted. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1795–1801, 2006     

Effect of Reactor Ambient Pressure on the Morphology of Spray Dried Magnesium Sulphate Powders

The effect of reducing the reactor air pressure on the morphology of spray dried magnesium sulphate powders is investigated, experimentally. A reactor, capable of drying and pyrolyzing solution sprays at low pressures, is designed and manufactured. A vibrating mesh nebulizer is employed to generate the spray. Four different pressures, starting from 60 Torr to the atmospheric pressure, and two different reactor air temperatures of 130°C and 420°C, are considered. In addition, two different concentrations of magnesium sulphate solutions are tested. The results are explained based on the effect of reactor air pressure on the droplet evaporation rate.     

NMR imaging and differential scanning calorimetry study on drying of pine,birch, and reed pulps and their mixtures

Drying, water fractions, and water distribution were investigated for pine, birch, and reed pulps and pine–birch, pine–reed, and pine–birch–reed pulp mixtures. Gravimetrically determined drying times showed that the drying rates of the pulps decreased at two to four inflection points. Characterizations of the dried pulps by differential scanning calorimetry (DSC) showed a faster removal of free water than freezing and nonfreezing bound waters; all decreased simultaneously, however. DSC also revealed the critical water contents at which the free water and freezing bound water disappeared. The gravimetrically determined inflection points of the drying curves corresponded with the critical points determined by DSC. NMR line widths and images produced by ¹H‐NMR imaging revealed the nature and regions of the pulp drying. The constant growth rate of the NMR line widths with decreasing water content appeared to change at two inflection points, which fell approximately in the same water content regions as the inflection points of the drying curves. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 937–945, 2006     

蒸发二段真空度不稳定原因分析

对斯那姆尿素工艺二段蒸发真空度不稳定原因进行了较详细的分析，并提出相应的操作处理措施     

Syntheses of long-chain quaternary ammonium salts from fatty alcohols by microwave irradiation

The phase-transfer catalysts, long-chain quaternary ammonium salts, were rapidly synthesized from fatty alcohols by the reactions with hydrogen halides in the presence of trialkyl amines under microwave irradiation. The catalysts could be widely applied in a variety of quick and new organic reactions, whether by conventional heating or under microwave irradiation. The reaction efficiencies under microwave irradiation were higher than those obtained with conventional heating.     

Batch drying kinetics of corn in a novel rotating jet spouted bed

The batch drying kinetics of corn as a test material were investigated experimentally in a novel rotating jet spouted bed (RJSB) using both continuous and intermittent (on/off) spouting and heating schemes. The parameters investigated include inlet air temperature, bed height, superficial air velocity, nozzle diameter, distributor rotational speed and intermittency of spouting and heat input. The results indicate that the drying kinetics are comparable with conventional spouted and fluidized beds for slow drying materials and that intermittent drying can save up to 40% of the thermal energy as well as air consumption with better quality product.     

PDC钻头真空扩散焊接工艺正交试验研究

对PDC钻头钎焊工艺存在的问题,提出用真空扩散焊接代替钎焊制造PDC钻头.采用正交试验法,通过极差分析和方差分析,研究了PDC钻头真空扩散焊接温度、焊接压力和焊接时间等工艺参数对焊接接头抗剪强度的影响,以得出其扩散焊接的最佳工艺参数.结果表明,当采用焊接温度700℃、焊接压力150 MPa和焊接时间6h的参数组合时,可获得高强度高致密性的焊接接头,其接头抗剪强度≥500MPa.     

微波辅助NaNO2氧化降解壳聚糖的影响因素研究

在微波辐照下,采用NaNO2氧化降解壳聚糖,研究了反应时间、反应温度、 NaNO2用量等不同条件对壳聚糖解速率的影响情况。实验结果表明微波辅助能明显促进壳聚糖的降解,适当增加NaNO2用量和提高反应温度均能加快壳聚糖的氧化降解速率。     

Maximizing the Retention of Ganoderic Acids and Water-Soluble Polysaccharides Content of Ganoderma lucidum Using Two-Stage Dehydration Method

Ganoderic acids and water-soluble polysaccharides are the main bioactive ingredients of Ganoderma lucidum and are heat sensitive. Hence, it is crucial to apply a suitable drying method for the drying of G. lucidum to minimize the loss of these bioactive ingredients. In this study, a two-stage drying method was applied to enhance the drying kinetics, as well as the retention of both ganoderic acids and water-soluble polysaccharides in dried G. lucidum fruiting bodies and slices compared to other single-stage-dried products. The results showed that two-stage drying enhanced the overall drying rate, which consequently shortened the total drying time up to 61 and 330% for fruiting bodies and slices, respectively, compared to single-stage drying methods. Furthermore, two-stage drying of Ganoderma fruiting bodies, which involves 18-h vacuum drying followed by 5-h heat pump drying, maximized the retention of ganoderic acids and water-soluble polysaccharides, with the retention of 97.90% of water-soluble polysaccharides and 4.2% more ganoderic acids than freeze-dried products. On the other hand, drying of Ganoderma slices within the shortest total drying time, which is 10-min heat pump drying followed by 50-min oven drying, also retained most of the ganoderic acids and water-soluble polysaccharides in the dried products; that is, about 80% of water-soluble polysaccharides and 11% more ganoderic acids than freeze-dried slices.