理学SMX-10/11型X荧光光谱仪的改进

对理学SMX-10／ll型X荧光光谱仪真空系统、样品定位系统及热交换器冷却水循环路径等易发生故障部位进行改进，并在11型仪器上增加了S元素分析通道。生产应用表明，改进效果良好，简化了分析工艺。降低了分析成本，提高了仪器的稳定性。     

二厘米微波衰减标准装置不确定度的验证

采用传递比较法对二厘米微波衰减标准装置不确定度进行了验证。测量标准装置的重复性以组内实验标准偏差sn(A)定量表征，测量标准装置的稳定性用组间实验标准偏差sm定量表征。     

Bioeffects of Low Energy Ion-Beam Implantation and Vacuum Treatment on M1 Arabidopsis Thaliana

Vacuum treatment and ion-beam bombardment are two major processes in the low energy ion-beam implantation. To accurately study the contributions of these two major factors to the bioeffects separately, the M1 generation variation of Arabidopsis thaliana with ion-beam implantation and vacuum treatment were compared through a series of key plant development parameters including morphological observation, biochemical assay and RAPD （random amplified polymorphic DNA） analysis. The results showed that ion-beam implantation had obvious effect on almost all of these parameters, and the vacuum treatment had some impacts on several morphological parameters such as the bolting time and the length of the primary stem. Taking the results together, the indication is that vacuum treatment has some slight contributions to the bioeffects of ion-beam implantation while ion-beam bombardment itself is the major creator of the bioeffects.     

Copolymerization of bromophenylmaleimide with ethyl or butyl methacrylate

N‐p‐Bromophenylmaleimide (BrPMI) does not polymerize in solution by conventional free radical mechanism. However, it readily polymerized in bulk when mixed with a free radical initiator and heated in a microwave oven for 7–8 min. Copolymerization of ethyl methacrylate or butyl methacrylate with BrPMI was conducted in dioxane. The copolymers were characterized by IR and ¹H NMR spectroscopy and gel permeation chromatography. The monomer reactivity ratios were calculated by a non‐linear least‐square analysis. Thermal analysis indicated a great improvement in thermal stability of the copolymers compared with the methacrylate homopolymers. BrPMI was also polymerized in bulk in the DSC pan, which allowed the calculation of the activation energy of its polymerization. Copyright © 2003 Society of Chemical Industry     

微波消解-ICP-AES法测定菜油中P、S

采用微波加热,在高温高压下酸消解样品,运用电感耦合等离子体原子发射光谱法(ICP-AES)同时测定菜油中P、S。本法选用紫外区谱线P178.221nm、S180.669nm,避免了基体中存在的Fe、Zn、Al、Cu、Mn、Ca等元素的光谱干扰。实验通过用纯氮吹扫光谱仪光路的方法消减空气中氧对紫外线的吸收,获得了足够的灵敏度。该方法简便、快速,稳定可靠,P、S检出限分别为0.067、0.078μg/ml,RSD为1.35%～5.05%,回收率为89.0%～100.9%。     

铸造Ti—0.2Pd合金SF—1000双级风机叶轮的研制

Ｔｉ－０．２Ｐｄ合金ＳＦ－１０００双级风机叶轮是大型盐酸再生设备的主要部件，采用整体铸造方法制造，无论在技术上还是经济上都是十分有利的。本文主要介绍采用加工石墨，铸铁组合型，真空电弧凝壳熔炼铸造工艺，成功地研制出整体铸造风机叶轮。     

非接触式半导体少子寿命测试方法——微波反射法

介绍了一种非接触式用于测量少子寿命的微波反射法，并与通常的光电导衰退法进行了比较。     

Ba（Mg1／3Ta2／3）O3微波陶瓷的损耗研究

本工作用ＸＲＤ，ＥＰＭＡ，ＳＥＭ等测试技术计算和示出了用不同活性粉料制备的Ｂａ（Ｍｇ１／３Ｔａ２／３）Ｏ３微波陶瓷晶格中Ｂ位离子有序度和元素的面分布情况，对它们在Ｘ面下的电行为作了探讨。实验结果表明，ＢＭＴ陶瓷的微波损耗主要与其密度有序度和微观结构的均一度有关。     

Evaluation of Textile Bobbins Drying Processes: Experimental and Modelling Studies

Drying of textile bobbins was carried out on two kinds of laboratory-scale dryers: in a cross circulation drying rig, atmospheric pressure heating air is used, while in the through circulation drying apparatus, the heating air is pressurized before the drying process takes place. In both cases, a bobbin was fitted with seven thermocouples, placed in a plane normal to the bobbin axis but at different radial distances, in order to provide temperature data during the drying process. In cross circulation drying, plots of temperature against time indicated the presence of two moving fronts, one starting from inside the bobbin, another from the outside, while in through circulation drying, similar plots showed the presence of an evaporation front, moving from inside the bobbin to the outside. In both canes, numerical models were developed to simulate the drying processes.     

Fluorine analysis of nuclear waste glasses

A method for analyzing the fluorine content of glass using a microwave oven to digest the glass is presented. Analysis time and secondary waste generation are reduced using this method, without sacrificing accuracy.