Improved methods for evaluating the molar mass distributions of cellulose in kraft pulp

Multi‐angle laser light scattering (MALLS) was used to characterize birch kraft pulps with respect to their absolute molecular mass distributions (MMDs). The pulps were dissolved in lithium chloride/N,N‐dimethylacetamide and separated by size exclusion chromatography (SEC). The weight‐average and number‐average molecular masses of the cellulose fractions of the pulps obtained from the absolute MALLS measurements were compared with the molar masses obtained by direct‐standard‐calibration relative pullulan standards. Discrepancies between the two detection methods were found, and two ways of correlating the relative pullulan molar masses to the absolute molar masses were examined. In the first method, the correlation was made over a large range of molecular masses. The second method correlated the molecular masses of the standards to the molecular masses of samples by the calculation of fictitious, cellulose‐equivalent molar masses of the standards. With the preferred second method, a more correct MMD of kraft pulp samples could, therefore, be obtained from an SEC system calibrated with narrow standards. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1170–1179, 2003     

Polymer/surfactant interaction—Its relevance to detergent systems

The field of polymer/surfactant interaction is reviewed in this work. Results from two investigative methods,viz., dialysis and surface tension, are discussed, illustrating the main behavioral patterns and outlining the principles of the interactions. Next, aspects of the interaction phenomena that appear to have relevance to detergent formulation are presented. These include solution rheology, solubility control and surface conditioning. Lastly, the importance of surface activity of the polymer itself is stressed, culminating in a discussion of the properties of hydrophobically modified water-soluble polymers (“polymeric surfactants”), both alone and in the presence of conventional surfactants. Based on the Samuel Rosen Memorial Award lecture, given at the AOCS Annual Meeting, Anaheim, CA, April 1993.     

Enzyme catalyzed durable and authentic oriental lacquer: a natural microgel-printable coating by polysaccharide–glycoprotein–phenolic lipid complexes

The chemistry and technology of oriental lacquer, proof of long-term durability by a laboratory test, and morphological features of the closely packed shell (polysaccharides–glycoproteins)–core (polymerized urushiol) microgel particles, which are chiefly responsible for degradation due to efflorescence outdoors, are described. The dimerization mechanism of urushiol was demonstrated by separation of over 20 urushiol dimer derivatives. Physiological dimerization of urushiol in the lacquer is very much influenced by the humidity in drying, and the interaction of semiquinone radicals with metal ions, hydrophilic polysaccharides and amphipathic glycoproteins contained in the lacquer. A mechanism for renewable oriental lacquer is proposed, involving harmony of technology and nature within the lacquer tree plantations in south-east Asia. A brief review of studies of lacquer chemistry and synthetic coatings is given.     

Characterization of konjac glucomannan–quaternized poly(4‐vinyl‐N‐butyl) pyridine blend films and their preservation effect

Novel polymer blends were prepared from a mixture of 2 wt % konjac glucomannan and 4 wt % quaternized poly(4‐vinyl‐N‐butyl) pyridine (QPVP) in aqueous solution and dried at room temperature for 72 h. Their structure and properties were studied by infrared, wide‐angle X‐ray diffraction, scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry. Thermal stability in the dry state was reduced with increasing content of QPVP. Compared with QPVP film, the tensile strength of the films was improved in the dry state. The maximum value of 12.74% tensile break elongation was reached when the content of QPVP was 30%. Structural analysis indicated that clear phase separation was observed when the content of QPVP was only 50%. Results from the filmcoating preservation experiments with lychee showed that this blend film had water‐holding ability. The fruit weight loss rate and rot rate both decreased in various degrees. The potential uses of these novel polymer films could be as preservative films. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1868–1875, 2004     

高支纯亚麻嵌入式复合纱的工艺探讨

探究了利用嵌入式复合纺纱技术纺制高支纯亚麻纱.通过改造多功能纺纱小样机以实现嵌入式复合纺纱技术并对雨露沤麻过后的亚麻纤维进行化学脱胶和剪切处理,以70/30的比例和水溶性维纶短纤维混合制条做成粗纱后,在细纱机上纺制了嵌入式亚麻水溶性维纶复合纱,通过对成纱的强伸性、毛羽、条干均匀度的测试与比较进行了纺纱工艺的优化.结果表明,纺制20.7 tex亚麻水溶性维纶嵌入式复合纱的工艺最佳值为捻系数420、长丝预加张力7.5 cN、长丝与长丝间距8 mm、长丝与粗纱间距1.5 mm;经优化工艺试纺的20.7 tex亚麻水溶性维纶嵌入式复合纱,经退维处理后的纱线细度为8.9 tex;亚麻水溶性维纶嵌入式复合纱结构稳定、强力较高、条干均匀、毛羽少,为开发高档亚麻类面料提供了新的途径.     

Iodine-loaded poly(silicic acid) gellan nanocomposite mucoadhesive film for antibacterial application

Iodine-loaded poly(silicic acid) gellan nanocomposite film was fabricated and evaluated for antibacterial properties. Poly(silicic acid) nanoparticles were synthesized by condensation of silicic acid under alkaline conditions in the presence of polyvinyl pyrrolidone, phosphate ions, and molecular iodine. The nanoparticles were incorporated into gellan dispersion to prepare gellan nanocomposite film using the solvent casting method. The nanocomposite films were characterized by Fourier transformed infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction studies. The results of characterization studies indicated improved thermal stability and an increase in the degree of crystallinity. The scanning electron micrographs and energy dispersive X-ray spectrum confirmed the uniform dispersion of silica and iodine in the nanocomposite films. The analysis of physical and mechanical properties revealed the enhanced tensile strength, moisture resistance, and higher folding endurance of poly(silicic acid) gellan nanocomposite films as compared to gellan film. Further, the iodine-loaded poly(silicic acid) gellan nanocomposite films showed good antibacterial activity against Staphylococcus aureus and Escherichia coli and effective mucoadhesive strength. The results indicate that iodine-loaded poly(silicic acid) gellan nanocomposite mucoadhesive film can be used for potential antibacterial applications in pharmaceuticals.     

Preparation of treelike and rodlike carboxymethylated nanocellulose and their effect on carboxymethyl cellulose films

In this work, carboxymethyl cellulose (CMC) with low substitution degree, followed by different posttreatments, was applied to prepare treelike CMC nanofibrils (CMCNFs) and rodlike CMC nanocrystals (CMCNCs), and their performance in CMC composite film was evaluated simultaneously. From transmission electron microscopy results, it was found that the treelike CMCNCFs exhibited a lager aspect ratio compared to the rodlike CMCNCs. As for reinforcing CMC film, 4 wt% was the best adding amount, at this time, the tensile strength of CMC/CMCNFs and CMC/CMCNCs composite films was increased by 72.1% and 47.3%, respectively. Moreover, adding these nanofillers to CMC also could enhance the thermal stability of composite films slightly, while the transmittance of composite films was reduced at the same time. In addition, CMC/CMCNFs film was designed as a packaging box to determine its performance. Therefore, this study could reveal the differences of properties for composites with different types of nanocellulose and provide a foundation for further application of nanocellulose.     

Bio-based sustainable films from the Algerian Opuntia ficus-indica cladodes powder: Effect of plasticizer content

The present study investigated the fabrication and characterization of bio-based sustainable films composed of a terrestrial plant raw material, namely Opuntia ficus-indica (OFI) cladodes powder (CP) and a marine seaweed derivative, namely agar (A). The effect of glycerol concentration on the properties of the casted films was evaluated at four different contents, namely 30, 40, 50 and 60 wt%. The films present UV-blocking properties, as well as moderate mechanical performance, thermal stability, and water vapor transmission rate (WVTR). The results point to an increase in thickness, elongation at break, moisture content, water solubility, and WVTR with increasing glycerol content. On the contrary, Young's modulus, tensile strength, and water contact angle decreased as glycerol concentration increased. The best combination is obtained for the film with 30% glycerol, based on an intermediate compromise between physical, mechanical, thermal, and barrier properties. All these outcomes express the potentiality of the powder obtained from grinding the OFI cladodes as raw material to produce low-cost films for the development of sustainable packaging materials.     

Fabrication and characterization of electrospun psyllium husk-based nanofibers for tissue regeneration

The present study reports for first time the blending of psyllium husk (PH) powder/gelatin (G) in the polymer-rich composition of polyvinyl alcohol (PVA) to make an electrospinnable solution. The composite was prepared in 3 different ratios viz., 100% (wt/wt) (PVA + PH), 75% + 25% (PVA + 75PH + 25G) (wt/wt) and 50% + 50% (PVA + 50PH + 50G) (wt/wt) in 6% PVA solution. Optimum electrospinning parameters were evaluated for all the prepared blends. The fabricated nanofibers were characterized by scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared, differential scanning calorimetry, porosity percentage, and fiber orientation using ImageJ software. A qualitative in vitro degradation study at room temperature is supported by SEM images. The cellular interactions were characterized by MTT assay of NIH-3T3 fibroblast cells for 2 and 4 days with an optimum cell growth of >50% by fourth day of culture and long-term cultivation of L929-RFP cells was observed for 10 days. The nanofibers were formed in the range of 49–600 nm. PVA + 75PH + 25G when cultured with L929-RFP cells exhibited highest fluorescence intensity and thus supported cellular proliferation significantly. Based on the results obtained from various analyses, we anticipate that fabricated psyllium-based nanofiber can be used as a promising candidate for wound healing and other biomedical applications.     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.