BINELOCA 程序与广东岭澳核电站大破口失水事故分析

ＢＩＮＥＬＯＣＡ程序是在吸收国外先进大破口失水事故分析计算机程序的基础上，针对我国现有大破口失水事故分析程序的不足和工程应用方面的问题，采用了一些成熟的、新型的和当今国际公认的瞬态热工水力数学物理模型以及水和蒸汽性质参数计算公式改编而成的大破口失水事故分析程序。通过对广东岭澳核电站大破口失水事故的计算表明，ＢＩＮＥＬＯＣＡ程序计算的结果与法国计算的结果是一致的。     

基于模糊修正熵权TOPSIS的战时装备供应链风险评估

针对战时装备供应链的特点,以远程精确打击、敌特后方袭扰和恶劣天气等三个因素为主要风险指标,运用修正的模糊信息熵权对TOPSIS法进行改进,提出了一种新的战时装备供应链风险评估方法。首先利用原始数据产生的模糊信息熵权进行客观赋权,并引入专家因素对权重进行主观修正,利用逼近理想解排序方法进行运算,最后通过实例计算与分析,验证该评估方法简便易行,结论合理,有效降低了指挥员决策的主观随意性。     

叶片数对超低比转速斜流式水轮机的影响

叶片数是影响超低比转速斜流式水轮机水力性能的因素之一。文章利用Fluent 16.0软件,研究分析了不同叶片数模型在不同流量工况下,外特性曲线以及内部流场分布图。结果表明:不同叶片数时,流量从最高效率点向小流量变化时效率下降的速度要比从最高效率点向大流量变化时的快。对于具体参数组合的超低比转速斜流式水轮机,存在最优的叶片数使得其水力性能最优。     

Layout Optimization for Greenhouse WSN Based on Path Loss Analysis

When wireless sensor networks (WSN) are deployed in the vegetable greenhouse with dynamic connectivity and interference environment, it is necessary to increase the node transmit power to ensure the communication quality, which leads to serious network interference. To offset the negative impact, the transmit power of other nodes must also be increased. The result is that the network becomes worse and worse, and node energy is wasted a lot. Taking into account the irregular connection range in the cucumber greenhouse WSN, we measured the transmission characteristics of wireless signals under the 2.4 Ghz operating frequency. For improving network layout in the greenhouse, a semi-empirical prediction model of signal loss is then studied based on the measured data. Compared with other models, the average relative error of this semi-empirical signal loss model is only 2.3%. Finally, by combining the improved network topology algorithm and tabu search, this paper studies a greenhouse WSN layout that can reduce path loss, save energy, and ensure communication quality. Given the limitation of node-degree constraint in traditional network layout algorithms, the improved algorithm applies the forwarding constraint to balance network energy consumption and constructs asymmetric network communication links. Experimental results show that this research can realize the energy consumption optimization of WSN layout in the greenhouse.     

一种新的动态权重更新相关反馈方法*

提出了正负相关图像所占比例与特征值的标准方差相结合来调整对应权值的方法.为了避免相关反馈的权值调整陷入局部最优状态,引入一个干扰因子,使权值跳出局部最优区域.结果表明了该方法的优越性.     

电感电容损耗电阻的讨论

通过对电容电感阻抗的测量，发现实验值偏离理论值。定性地分析了误差的来源，得出的结论是电感电容内部的损耗电阻随着频率的变化而变化，变化方向相反而并非相同。     

Analysis of Intermetallic Phases Formed on Surface Vapor Oxidized H13 Hot Work Steels in Molten Aluminum

In this paper, the author dipped surface vapor oxidized H13 steel specimens into 700℃ molten aluminum liquid for a certain period of time. Analyze the intermetallic phases formed on the H13 samples surface with optical microscope and X-ray diffraction method. The observation of immersion test sample's cross-section shows that Fe3O4 film will protect die substrate from molten aluminum erosion. The identification of the intermetallic phases reveals that they consist of 2parts, which is named as the composite layer and the compact layer. Further investigations are made in order to know the phase constituents of the 2 layers, they are Al8Fe2Si (outer composite layer), (AlCuMg) and Al5Fe2 (compact layer),respectively. The experimental results show that on the same specimen, a convex surface with bigger radius of curvature is more likely to be molten and the melting loss speed is also faster than a flat and smooth surface. The thickness of compact layer on a smooth surface is much bigger than that of the convex surface. Therefore, the author supposes the compact layer is favorable in stabilizing the die surface material from further melting loss, as their formation on the die surface, the melting loss speed will decrease.     

聚酯的摩尔质量与机械性能研究——Ⅰ.动态力学性能

应用粘弹谱仪考察了不同摩尔质量的聚酯(PET、PBT、PBT/PET)的动态力学性能,结果表明摩尔质量增大将提高其模量,但亦导致结晶速度变慢,使测得的模量反而比摩尔质量较低的试样小.     

溶液缩聚物分子量分布及其控制的研究

本文根据溶液缩聚基本原理及反应过程的基本事实，用随机过程方法，得到缩聚产物分子量分布函数，并对分子量及其分布的控制作了讨论。     

充油S-SBR加工行为的研究

在中试装置上合成相对分子质量分布较宽的充油S-SBR，考察不同环烷油和芳烃油填充量的充油S-SBR的流变性能和混炼行为。结果表明，增大油的填充量能提高充油S-SBR的流动性能，充芳烃油S-SBR相对于充环烷油的S-SBR对温度更敏感，宽相对分子质量分布的充环烷油S-SBR的混炼性能优于S-SBR1204及E-SBRl778，竟相对分子质量分布的充芳烃油S-SBR的混炼性能优于S-SBR1204，Solprene380和E-SBR1712。