羟丙基糯米粉糊的特性及应用初探

研究了羟丙基糯米粉糊的性质，以及流变特性和温度影响流变特性的规律，并对其在蚝油食品中作为增稠稳定剂的应用做了初步研究。结果表明，糯米粉经羟丙基化后，凝沉性更弱，受热易于成糊和分散，糊的粘度提高，冻融稳定性极佳，透明度大为提高，但是抗剪切稳定性反而降低。在实验测定的温度下，羟丙基糯米粉糊呈现假塑性流体的特征且假塑性随醚化程度的提高而增强。应用试验表明其增稠效果好、稳定性高，可用做增稠稳定剂。     

麦田草害及其化学防除

麦田杂草不仅种类多而且适应性广，抗逆性强，严重威胁着大，小麦生产。麦田化学除草，首先要正确选用对口除草剂品种，提高整地和施药质量。     

Phosphate sorption approach for determining phosphorus requirements of wheat in calcareous soils

Five field experiments involving P application rates from 0 to 66 kg P ha^–1 were conducted on irrigated wheat at Tandojam, Pakistan. The soils belonged to two great soil groups, Torrifluvent and Camborthid. All soils were calcareous. Olsen-P contents ranged from 3.5 to 6.3 mg P kg^–1. Phosphate sorption curves were developed for soils from control (no P) plots at each site. Concentrations of P in solution established by fertilization in the field as estimated from the sorption curves ranged from 0.008 to 0.16mg P L^–1. Actual grain yields were converted to relative grain yields and plotted against corresponding concentrations of P in solution. Yield response to P application was obtained in each experiment. Control plot yields ranged from 57 to 89% of maximum yield of respective experiments. Phosphorus requirements of wheat were 0.032 mg L^–1 for 95% yield as determined from a composite yield response curve. Predicted quantities of P required to attain 0.032 mg P L^–1 ranged from 18 to 29 kg P ha^–1. The results of the study suggest that the P sorption approach can be used as a rational basis for making P fertilizer recommendations for various soil-crop combinations.     

PVC／OMMT／WF纳米复合材料性能研究

对蒙脱土进行有机改性制得有机蒙脱土（OMMT），并制备了聚氯乙烯侑机蒙脱土／木粉（PVC／OMMT／WF）纳米复合材料。采用硅烷偶联剂对木粉表面进行改性，有效提高了聚氯乙烯／木粉（PVC／WF）复合材料的力学性能，其中加入1．5％（质量含量，下同）硅烷偶联剂可使复合材料的冲击强度和拉伸强度分别提高14．8％和18．5％。研究了OMMT的加入对木粉改性前后的PVC／WF复合材料力学性能、耐热性能及阻燃性能的影响，结果表明，木粉未经改性时，OMMT加入无助于PVC／OMMT／WF复合材料力学性能的提高；木粉用硅烷偶联剂改性后，添加少量的OMMT，可使PVC／OMMT／WF复合材料的冲击强度和拉伸强度明显提高。研究表明，添加OMMT可显著延迟复合材料的点燃时间，燃烧残余率也明显增加，OMMT是PVC／WF复合材料的高效阻燃剂。     

Ultra-high pressure sterilization of powdery food stuff—a new application of a roller compactor

A new non-heating technique was developed for the sterilization of food stuff. Applying a roller compactor, ultra-high pressure sterilization has experimentally demonstrated its ability to sterilize dry powders, such as corn flour and Chinese herbs, with little quality deterioration. Also, the degree of food sterilization was found correlated well with the linear press forces between the rollers, roller gaps, and number of compaction passes. In comparison to the conventional high pressure sterilization technique, the new dry continuous processing method has the advantage of lower investment cost and is more versatile for sterilizing various food powders.     

表面处理对木粉增强PVC发泡复合板材性能的影响

研究表面处理的木粉对发泡聚氯乙烯(PVC)板材的增强改性效果。使用铝酸酯偶联剂、丙烯酸丁酯预聚物对木粉进行表面处理，将其混合到聚氯乙烯发泡板材配料中进行板材加工生产，结果表明，经处理的木粉能提高发泡PVC板材的拉伸强度和冲击强度。用铝酸酯偶联剂处理木粉的发泡板材力学性能好于用丙烯酸丁酯预聚物处理的板材；而用丙烯酸丁酯预聚物处理木粉的复合材料在流变加工性能优于用铝酸酯处理木粉的复合材料。     

木粉增强聚丙烯力学性能的改善方法

以废弃木粉为增强材料,制备了木粉增强聚丙烯复合材料,研究了改善废弃木粉增强聚丙烯复合材料力学性能的途径。结果表明,通过适当的处理方法对木粉进行表面处理、对基体树脂进行改性,可以有效地提高复合体系的界面粘接强度,能大幅度改善复合体系的力学性能;采用短切玻璃纤维及玻璃纤维毡与废弃木粉组合,可以获得力学性能很高、能作为结构材料使用的复合材料。     

Solvent extraction of oil from soybean flour II— pilot plant and two-solvent extractions

The process of grinding soybeans to a fine flour and extracting the flour with hexane was studied on a pilot plant scale. The crude oil from the pilot plant study had 15 ppm phosphorus and was suitable for physical refining after a light acid pretreatment and bleaching. The refined oil showed a Lovibond color of 1.4 yellow and 0.3 red. The pilot plant study also showed that grinding of the soybeans and the separation of solid from miscella were the most difficult steps in solvent extraction with fine flour. A laboratory study on separation of miscella from meal by aqueous ethanol reduced the hold-up volume, but it did not remove all the miscella. A test with betacarotene showed that only the miscella outside the flour particles was displaced. Aqueous ethanol solutions used as a second solvent extracted additional nontriglyceride materials (primarily phospholipids) from the meal. Also, the free fatty acid content of the oil was increased with aqueous ethanol solution wash. The quality of the extracted crude oil was lowered by using a second solvent, but it had the advantage of needing only one centrifugation to separate miscella from meal.     

The role of manganese and nitrogen nutrition in the susceptibility of wheat plants to take-all in Western Australia

Five field experiments are described which measured the effect of take-all on grain yield of wheat when 5 levels of manganese fertilizer were applied in a factorial combination with 5 different types of nitrogen fertilizer.Ammonium nitrogen fertilizer, either as ammonium sulphate or ammonium chloride, lowered the severity of take-all. By contrast, sodium nitrate had no effect on the incidence and severity of take-all. Ammonium chloride and ammonium sulphate were equally effective at controlling take-all, suggesting that the chloride or sulphate ion had little or no effect on the disease.Manganese sulphate decreased take-all severity at two trial sites. Where manganese was deficient, an application of manganese lowered the severity of take-all, had no effect on the incidence and increased the dry matter and grain yields of the wheat plants. There were no beneficial effects of applied manganese if the wheat plants were adequately supplied with soil manganese.The results suggest that take-all is more severe where plants are deficient in either manganese or nitrogen. The work also suggests that manganese deficiency is not necessarily the reason why the wheat plants grown on the acid soils of south-west Western Australia are prone to take-all.     

Preparation of HDPE/SEBS‐g‐MAH and its effect on mechanical properties of HDPE/wood flour composites

In this article, high density polyethylene/styrene‐ethylene‐butylene‐styrene block copolymer blends (HDPE/SEBS) grafted by maleic anhydride (HDPE/SEBS‐g‐MAH), which is an effective compatibilizer for HDPE/wood flour composites was prepared by means of torque rheometer with different contents of maleic anhydride (MAH). The experimental results indicated that MAH indeed grafted on HDPE/SEBS by FTIR analysis and the torque increased with increasing the content of maleic anhydride and dicumyl peroxide (DCP). Styrene may increase the graft reaction rate of MAH and HDPE/SEBS. When HDPE/SEBS MAH was added to HDPE/wood flour composites, tensile strength and flexural strength of composites can reach 25.9 and 34.8 MPa in comparison of 16.5 and 23.8 MPa (without HDPE/SEBS‐g‐MAH), increasing by 157 and 146%, respectively. Due to incorporation of thermoplastic elastomer in HDPE/SEBS‐g‐MAH, the Notched Izod impact strength reached 5.08 kJ m^?2, increasing by 145% in comparison of system without compatibilizer. That HDPE/SEBS‐g‐MAH improved the compatibility was also conformed by dynamic mechanical measurement. Scanning electron micrographs provided evidence for strong adhesion between wood flour and HDPE matrix with addition of HDPE/SEBS‐g‐MAH. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007