Second-order Wagner theory of wave impact

The paper deals with the two-dimensional unsteady problem of the impact of a liquid parabola onto a rigid flat plate at a constant velocity. The liquid is assumed ideal and incompressible and its flow potential. The initial stage of the impact is the main concern in this study. The non-dimensional half-width of the contact region between the impacting liquid and the plate plays the role of a small parameter in this problem. The flow region is subdivided into four parts: (i) the main flow region, the dimension of which is of the order of the contact-region width, (ii) the jet-root region, where the curvature of the free surface is very high and the flow is strongly nonlinear, (iii) the jet region, where the flow is approximately one-dimensional, (iv) the far-field region, where the flow is approximately uniform at the initial stage of impact. A second-order solution in the main flow region has been derived and matched to the first-order inner solution in the jet-root region. The matching conditions provide an estimate of the dimension of the contact region for small time. Pressure distributions in both the main flow region and the inner region are derived. The accuracy of the obtained asymptotic formulae is estimated. The second-order hydrodynamic force acting on the plate is obtained and compared with available experimental data. A fairly good agreement is reported.     

考虑次内力的桁架结构有限元分析

用有限元软件ANSYS对带式输送机栈桥的桁架结构进行了计算，结合实例着重探讨了考虑次内力时的桁架结构有限元分析在建模过程中需要解决的问题。     

波浪力计算中的一个新边界元方法

本文就波浪与结构物作用问题，提出了一个新的高阶边界元方法。较之Ｅａｔｏｃｋ Ｔｏｙｌｏｒ和Ｃｈａｕ的方法，本文在体内附助积分方程中应用了满足刚性水面条件和弱刚性底面条件的简单格林函数。计算速度相应地有所提高；漂浮结构的积分方程更为简洁；计算结果与Ｅａｔｏｃｋ Ｔａｙｌｏｒ和Ｃｈａｕ的方法具有几乎相同的精度和收敛速度。     

10000m^3内浮顶油罐双浮动吸油装置设计

介绍了某油库扩建工程中10 000 m3内浮顶油罐双DN500浮动吸油装置的结构设计,并对内浮顶罐浮动吸油装置的浮力进行了优化配置,此经验对我国内浮顶油罐浮动吸油装置的设计和使用具有一定的指导意义.     

单线循环客运索道设计参数研讨(续三)

论证客运索道设计中的几个重要参数,建立抱索器钳口夹紧力计算公式,第一次给出钳口夹紧力与钢索金属断面积的比值,并进行了钢索弯曲应力计算公式的推导.     

考虑渗流力的基坑涌砂分析

本文根据基坑防渗帷幕周围的地下水渗流特征，分析了渗流力对基坑流砂的影响，提出了按涌砂安全系数进行防渗帷幕埋入深度计算的方法。     

冷弯型钢纵向变形的理论分析及计算

对冷弯型钢的纵向变形过程进行了力学分析，得到了变形微分方程，求得了转动角的理论公式，并对其变形形状进行了分析计算。     

Equilibrium Studies of the System'(Fe,Co)O'–(Fe,Co)3O4 by Solid-State emf Measurements in the Temperature Range 970 to 1370 K

The equilibrium reaction 3'(Fe, Co)O'( ss ) +1/2O₂ ( g ) ⇄ (Fe, Co)₃O₄( ss ) was studied in the temperature range 970 to 1370 K for seven different total compositions of molar ratios 0.5 < Fe/(Fe + Co) ≤ 1.0. The equilibrium pressures of oxygen were determined by using galvanic cells incorporating calcia stabilized zirconia as solid electrolyte and the Fe/Co ratios in the solid-solution phases by wavelength dispersive spectrometry microprobe analyses. The activities of 'FeO' in the cobaltowüstite phase were then derived from the experimental results obtained.     

不能移动封隔器管柱变形受力分析——封隔器管柱受力分析系统讨论之五

不能移动封隔器管柱是油气井封隔器完井的一种常见类型 ,在井内压力、温度、流体 (井内压力、温度、流体简称井内条件 ,下同 )发生变化时 ,不能移动封隔器管柱受力分析是保证井下安全和完井作业成功的关键 ,同时该管柱受力分析与自由移动封隔器管柱受力分析有很大的差别。文中对不能移动封隔器管柱变形受力的有关问题进行了分析、推导和讨论 ,并给出了算例。     

�����޵�Ԫ�������Ż����������²�������

下部钻具组合力学性能分析中,稳定器与井壁的间隙是影响其性能的重要因素。对于多稳定器组合,事先设定稳定器与井壁接触情况既困难也不准确。本文从有限单元的基本总势能表达式出发,采用最优化理论中的罚函数法,分析了稳定器间隙对下部钻具力学性能的影响,为解决稳定器与井壁的接触问题找到了一个新方向。