钢管机械扩径工艺研究

介绍了大口径直缝焊管机械扩径的优点，原理及扩径力的计算，找出影响扩径力及扩径头寿命的因素。     

Manipulating Deformable Linear Objects: Fuzzy-Based Active Vibration Damping Skill

Human can handle a deformable object and damp its vibration with recognized skill. However, for an industrial robot, handling a deformable object with acute vibration is often a difficult task. This paper addresses the problem of active damping skill for handling deformable linear objects (DLOs) by using a strategy inspired from human manipulation skills. The strategy is illustrated by several rules, which are explained by a fuzzy and a P controller. A proportional-integral-derivative (PID) controller is also employed to explain the rules as a comparison. The interpretations from controllers are translated into high level commands in a robotic language V+. A standard industrial robot with a force/torque sensor mounted on the wrist was employed to demonstrate the skill. Experimental results showed the fuzzy based damping skill is quite effective and stable even without any previous acknowledge of the deformable linear objects.Category (5)     

适用于稠油开采的游梁式抽油机设计分析

在稠油开采中,抽油杆在液体中运动时,所受到的摩擦阻尼力很大,有时高达几十千牛。上冲程时,该力有加大悬点载荷的作用;下冲程时,该力使抽油杆下行困难,甚至悬点载荷为零。为了开采稠油,必须根据其特点设计适应的游梁式抽油机。文章分析了稠油用抽油机的受力特点,提出了该类抽油机的设计要求。     

A new curvature technique calculation for surface tension contribution in PLIC-VOF method

The volume of fluid (VOF) methods have been used for numerous numerical simulations. Among these techniques used to define the moving interface, the piecewise linear interface reconstruction (PLIC-VOF) is one of the most accurate. A study of the superficial tension impact on two-phase flow with free surface is presented. A new method based on direct staggered grid is developped to include surface tension in PLIC-VOF. The new numerical curvature calculation method doesn't need smoothed colour function and leads to less “spurious current”. This technique is applied to the calculus of surface tension force in the case of the rise of air bubble in viscous liquid and the fall of liquid drop in the same liquid on free surface. Droplets, thin layer and capillarity waves are observed after the free surface rupture for different Bond number. The influence of surface tension calculus is then obvioused and when the drop hit the free surface, wavelets propagate toward the virtual boundaries imposed.     

无捻毛巾产品毛羽问题的分析与实践

对无捻毛巾产品毛羽问题进行了分析,对成因进行了初步探索.通过试验,制定了较为有效的改进措施和工艺.无捻毛巾制品的毛羽问题得到改善,并控制在一个较为合理的范围内.     

“新合纤”的研究开发

介绍了“新合纤”研究开发的历史过程以及“新合纤”的特征及其加工方法，讨论了“新合纤”研究开发的现状及其未来。     

Tearing, folding and deformation of a carbon-carbon sp-bonded network

A monolayer and a few layers of carbon sp²-bonded networks were torn and folded by the tip of an atomic force microscope at the steps on newly cleaved highly oriented pyrolytic graphite. It was found that the preferential breaking directions and folding axes are along the symmetry directions of the graphite hexagonal structure. Depending on the force exerted by the tip, breaking may occur along other directions. The torn part of the graphene sheet can even be stretched and deformed, and does not resume its original shape after release from the tip.     

Optical scattering in beef steak to predict tenderness using hyperspectral imaging in the VIS-NIR region

The objective of this research is to develop a non-destructive method for predicting cooked beef tenderness using optical scattering of light on fresh beef muscle tissue. A hyperspectral imaging system (λ = 496–1,036 nm) that consists of a CCD camera and an imaging spectrograph, was used to acquire beef steak images. The hyperspectral image consisted of 120 bands with spectral intervals of 4.54 nm. Sixty-one fresh beef steaks, including 44 strip loin and 17 tenderloin cuts, were collected. After imaging, the steaks were cooked and Warner-Bratzler shear (WBS) force values were collected as tenderness references. The optical scattering profiles were derived from the hyperspectral images and fitted to the modified Lorentzian function. Parameters, such as the peak height, full scattering width at half maximum (FWHM), and the slope around the FWHM were determined at each wavelength. Stepwise regression was used to identify 7 key wavelengths and parameters. The parameters were then used to predict the WBS scores. The model was able to predict WBS scores with an R = 0.67. Optical scattering implemented with hyperspectral imaging shows limited success for predicting current status of tenderness in beef steak.     

Interconnected power systems with superconducting magnetic energy storage

The objective of this work is to discuss the concept of back‐to‐back interconnection systems with energy storage, especially with a Superconducting Magnetic Energy Storage (SMES) incorporated into a back‐to‐back DC link. In this case, each converter of the back‐to‐back system is used as a power conditioning system for the SMES coils. Since the AC–DC converter can be designed independently of the frequency of the power system, a two‐way switch is connected to the AC side of each converter. This two‐way switch can select the interconnected power systems. By using the two‐way switches, this system can provide the stored energy in the SMES system to each interconnected power system through two AC–DC converters. For instance, lower‐cost power of each power network can be stored through two converters during the off‐peak hours and made available for dispatch to each power network during periods of demand peak. Then this system increases the reliability of electric power networks and enables the economical operations depending on the power demand. This paper describes the unique operations of the back‐to‐back interconnection with SMES and discuses the optimal SMES configuration for a 300‐MW‐class back‐to‐back interconnection. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(2): 37–43, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20482     

蚕蛹蛋白纤维染色性能的研究

由粘胶和蚕蛹蛋白混纺而成的蚕蛹蛋白纤维，采用双活性基活性染料染色，对染色工艺条件作了重点试验。结果表明，pH值和温度是最大的影响因素，该纤维适宜低温、pH值近中性条件下上染和碱性条件下固色。