浔江防洪堤对西江中下游洪水的归槽影响

基于河道洪水演算原理,建立符合河流水力特性及其变化规律的边滩滞洪水库调节法流量演算模型、校正因数法水位演算模型,利用实测洪水和防洪堤资料进行归槽或还原演算,综合分析防洪堤对洪水归槽的影响。保护区滞洪容积占次洪水总量9．50％的浔江防洪堤对西江中下游洪水过程的归槽影响大于对洪峰的归槽影响,而且洪水类型和干支流组合不同,影响的程度也不相同：对流量过程、洪峰流量影响的最大归槽流量、最大归槽流量比重分别为3680m^3／s、9．63％,2700m^3／s、5．90％,对水位过程、洪峰水位影响的最大变幅为0．60、0．22m。浔江防洪堤造成的洪水归槽并未显著改变西江中下游洪水特性,干支流洪水遭遇、区间降雨和雨洪重叠仍然是形成西江中下游大洪水的主要因素,西江中下游洪涝频繁是气候和流域环境变化综合影响的结果。     

埕岛油田馆上段沉积砂体及其夹层分布特征

通过岩矿特征、剖面结构、砂岩粒度和砂体形态分析,认为埕岛油田馆陶组上段为曲流河沉积。按砂体发育特点和成因类型划分出主河道连片砂体、河道边缘连续窄带状砂体、天然堤断续带状砂体、决口水道扇形席状砂体及废弃河道成因的透镜状砂体等5种类型。在研究区383口井精细地质研究的基础上,从不同成因储油砂体角度总结出夹层分布特征。建立了储油砂体内夹层的空间分布模式：主河道砂体内夹层分布复杂,一般底部发育钙质夹层,中部多发育物性夹层,上部为泥质夹层;河道边缘砂体主要发育泥质夹层;决口扇砂体内泥质夹层分布稳定;天然堤和废弃河道仅发育极少的钙质夹层。     

再生细骨料采用强度比作为技术指标的研究

抗压强度比能够反映再生细骨料的品质,可作为区别再生细骨料品质的技术指标.水泥品种和再生细骨料的细度模数会对强度比产生影响,在测定时需规定水泥品种并考虑细度模数的影响.笔者给出了强度比的概念和试验方法,并据此对再生细骨料进行了分类.     

高含硫气藏中元素硫沉积形态和微观分布研究

元素硫沉积是高含硫气藏开采过程中存在而又必须解决的难题之一.随着高含硫气藏储层压力不断下降,元素硫溶解度也不断下降,一旦元素硫溶解度低于元素硫含量,元素硫就会从地层中沉积下来.沉积的元素硫会堵塞地层孔隙,降低渗透率,严重影响气井产能.为了研究元素硫在地层中的沉积形态和沉积特征,利用自主设计的实验流程和实验方法,使TD5-1井高含硫气体通过岩芯,并降低压力让元素硫在岩芯中沉积下来,然后对沉积了元素硫的岩芯进行电镜扫描和能谱分析,首次得到了元素硫在岩芯中的沉积形态,即元素硫主要以膜状形式分布在岩芯孔隙壁面上.该研究结果为深入认识、掌握元素硫沉积规律以及指导高含硫气藏合理开发奠定了基础.     

风力发电机电磁场谐波分析及槽配合选择

在电机设计中槽配合的选择尤为重要,这其中就涉及到谐波分析,对双速交流电机电磁场谐波进行了数理分析,并建立了模型,其中齿谐波的分布成为准确分析谐波的关键所在,最后通过易语言实现了电磁分析的可视化编程,并在系列风力发电机的实际工程中,用此程序优化计算,最终确定了系列风力发电机的恰当定转子槽配合为72／82。     

Experimental Study on the Expansion Uniformity of Armature

A measurement system has been developed based on high-precision printed probes in printed circuit board (PCB) and steep rising-time probe adapters,which can be applied to study the expansion uniformity of armature in a helical magnetic flux compression generator (HFCG).The influences of wall thickness and initiation position on the expansion uniformity of armature in HFCG were experimentally investigated.The results show that the armature with thinner wall thickness will easily rupture due to the high pressure of detonation products inside,the armature with larger wall thickness will easily crack due to the tensile stress on the outer surface of the wall,the influence of the end effect on the expansion uniformity can be ignored if the distance between the first group of probe and the initiation point is more than 3 times the armature diameter.     

Coal Dust Explosions in a Large Scale Experimental Tube

Coal dust explosion conducted in a 200 mm diameter, 29.6 m long tube is prese nted in this paper. 40 dust dispersion system sets were used to disperse coal du st into the tube. A constant temperature hot wire anemometer was used to measure the gas velocity during the dispersion process. Kistler piezoelectric pressure sensors were used to measure the propagation of the pressure wave during the exp losion process. The overpressure of coal dust explosion in the tube was 70 kPa and the velocity of pressure wave...     

New Method of Manufacturing Micro Parts Using Thiobacillus Ferrooxidans

A new method of processing and manufacturing certain parts of instruments through biological approach is studied. Knowledge of feasibility of micro-manufacturing is obtained by comparing experimental results of etching surfaces of copper, aluminium alloy, brass, steel and stainless steel using strain of Thiobacillus ferrooxidans (T.f.). Our experimental results show that certain metals can be etched using T.f., the most feasible material is copper, followed by brass, etc., with stainless steel the least. The surface of the stainless steel material is nearly unchanged during surface-etching. Micro parts made of copper or brass can be satisfactorily processed with T.f. and the rate of processing on copper is about 14?μm/h. Furthermore, surface roughness and processing speed are controlled by pH value and temperature of etching liquid, in addition to swing rate of the the swing bed.     

木制品真空浸蜡实验研究

主要对在真空的条件下用液蜡作浸溃液、做木块被浸溃物的真空浸溃实验过程作了详细的介绍,分别介绍实验前的准备,实验中的现象及注意事项,试验结论等。然后说明在真空条件下的浸渍质量优于常规浸渍的质量,并得到一些浸渍质量与真空度和浸渍时间的定量关系,从而给出研究高质量浸渍结果的实验方法。     

浅谈风力发电机组基础的施工

风机施工点较为分散,单个基础挖方量大,钢筋制安工作量大,属大体积砼。基础砼采用现场集中拌料,分散浇筑。以内蒙古乌拉特中旗风电场为例,介绍风机基础的施工工艺和质量控制。