正交多项式的并行算法修正及其稳定性分析

通过修正求解Chebyshev多项式的Clenshaw和Forsythe算法。提出了求解一般正交多项式的两种并行算法。并通过讨论这两种并行算法矩阵形式的舍入误差，对它们的稳定性进行了分析。     

主动约束层阻尼板结构动力学建模研究

将有限元法和GHM法相结合，给出了建立主动约束层阻尼（ACLD）板结构动力学模型的新方法。建模时，考虑到粘弹材料（VEM）的纵向位移影响，采用GHM方法描述VEM的本构关系，解决了VEM的力学特性随温度和频率变化的难点，避免因VEM的复杂本构关系而产生的微分积分方程。算例表明本文给出的建模方法是准确的，ACLD结构能够有效控制结构振动。     

Coupling GIS with Hydrologic and Hydraulic Flood Modelling

Geographic Information Systems (GIS) have been recognised as a powerful means to integrate and analyse data from various sources in the context of comprehensive floodplain management. As part of this comprehensive approach to floodplain management, it is very important to be able to predict the consequences of different scenarios in terms of flooded areas and associated risk. Hydrologic and hydraulic modelling plays a crucial role and there is much to gain in incorporating these modelling capabilities in GIS. This is still a rather complex task and research is being done on the full integration of these models. Interfacing between these models and GIS may be a very efficient way of overcoming the difficulties and getting very good results in terms of engineering practice. This paper presents results based on the use of Intergraph GIS coupled with Idrisi GIS. Using these two systems substantially increased the flexibility of using GIS as a tool for flood studies. A lumped (XSRAIN) and a distributed (OMEGA) hydrologic models were used to simulate flood hydrographs. The well known HEC-2 Hydraulic model was used to compute flooded areas. These models were applied in the Livramento catchment with very good results. The computation of flooded areas for different flood scenarios, and its representation in GIS, can be used in the assessment of affected property and associated damages. This is a very useful GIS-based approach to floodplain management.     

三维漫射体真彩色合成似狭缝彩虹全息术

采用合成似狭缝彩虹全息术记录三维漫射体真彩色彩虹全息图，用单波长激光逆光路再现。在记录过程中，不同波长的参考光具有不同的入射角，从而使透镜孔径的有效利用率达到最高，并给出了理论分析和实验结果．     

Instability of zeolite Y supported cobalt sulfide hydrotreating catalysts in the absence of H2S

Ion exchanged CoNaY was sulfided at 473 and 673 K and subsequently heated in He at 673 and 773 K. The resulting samples were characterized by means of overall sulfur analysis, temperature programmed Ar treatment and Fourier transform infrared spectroscopy. It was shown that during He flushing at sufficiently high temperature a protolysis reaction occurs resulting in the decomposition of Co sulfide into Co²⁺ ions and H₂S.     

Finite elements in the analysis of pressure vessels and piping-a bibliography (1976–1996)

The paper gives a bibliographical review of the finite element methods (FEMs) applied for the analysis of pressure vessel structures/components and piping from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore the aim of this review is to give the reader an encyclopaedic view of the differnt possibilities that exist today for the finite element analysis in the fields of pressure vessels and piping. The bibliography at the end of the paper contains approximately 1900 references to papers, conference proceedings and theses/dissertations on the subject that were published in 1976–1996. These are classified in the following categories: linear and non-linear, static and dynamic, stress and deflection analysis; stability problems; thermal problems; fracture mechanics problems; contact problems; fluid-structure interaction problems; manufacturing of pipes and tubes; welded pipes and pressure vessel components; development of special finite elements for pressure vessels and pipes; finite element software; and other topics. Also finite element software, general purpose and special purpose codes, used for the analysis of pressure vessels and pipes are briefly discussed and presented.     

Full scale thermal testing of latent heat storage in wallboard

Full scale thermal storage tests were conducted in a room lined with PCM wallboard having latent heat storage capacity. The results were compared with those obtained from tests conducted in a similar room lined with ordinary wallboard. The research showed that PCM wallboard can function efficiently as a thermal storage medium which can be applied to peak load shifting, improved use of waste and solar heat as well as more efficient operation of heating and cooling equipment.     

On integral equation approaches to the mechanics of fibre-crack interaction

The paper examines the problem of a penny-shaped crack which is formed by the development of a crack in both the fibre and the matrix of a composite consisting of an isolated elastic fibre located in an elastic matrix of infinite extent. The composite region is subjected to a uniform strain field in the direction of the fibre. The paper presents two integral-equation based approaches for the analysis of the problem. The first approach considers the formulation of the complete integral equations governing the associated elasticity problem for a two material region. The second approach considers the boundary integral equation formulation of the problem. Both methods entail the numerical solution of the governing integral equations. The solutions to these integral equations are used to evaluate the stress intensity factor at the boundary of the penny-shaped crack.     

Implementation of multipoint connections in an ATM switching network

This paper presents the problems in the implementation of multipoint connections at switching level using the example of an ATM switching network. By choosing the proper routeing mechanism and the appropriate architecture of the switching element, a switching network can gradually be adapted to an increasing share of multipoint traffic. The first section describes the problems with the handling of multipoint connections within a multiple stage connection oriented switching network. In particular this refers to the routeing of the cells through the switching network. Several alternatives on this issue are discussed. Both, the selected approach based on a differentiated self-routeing mechanism and the corresponding cell format are introduced. In the second part of this article several switch architectures are compared in respect of their multipoint capability. It is demonstrated that at present the most promising solution are switching elements based on the principle of central buffering. A single chip solution using this concept is employed in the presented switching network.     

砖砌体双向受力单元非线性分析模式

本文借鉴了前人的试验研究,在假定砌体单元为材料主方向的正交各向异性体的基础上,建立了应力增量和应变增量关系式。并应用正交各向异性体弹性常数转换方法,推导出在应力主方向的切线刚度阵,并由此建立了砖砌体双向受力单元非线性分析模型,应用于墙梁结构计算,与试验结果比较吻合。