线材轧制技术的新进展

介绍了ＤａｎｉｅｌｉＭｏｒｇａｒｄｓｈａｍｍａｒ公司与Ｍｏｒｇａｎ公司提供的线材生产的新设备、新技术。并对其做了分析比较，特别对实现无序轧制多品种生产进行了讨论，指出新型高效线材轧机、高速切头飞剪和相关技术的采用，将推进线材轧制技术的新进展。     

Accelerated electrospark deposition and the wear behavior of coatings

Electrospark deposition (ESD) is a coating process that is featured by low heat input to the substrate. Low coating efficiency and other limitations influence its wider application. The present paper introduces newly designed ESD equipment, by which a higher coating rate can be reached. The relationship among coating thickness, surface roughness, and process parameters such as pulse energy, pulse frequency, and deposition time are presented. Electrospark deposition coating by the new equipment on AISI 1045 steel (with WC-8% Co as electrode) increases the wear resistance by 5 to 8 times. The micromechanism is investigated by scanning electron microscopy observation.     

研究合金定向凝固组织的脉冲磁场设备的研制

介绍了脉冲电磁场发生设备的工作原理 ,设计等。并介绍了其如何与合金的定向凝固设备结合 ,以实现对合金的定向凝固组织在脉冲电磁场作用下的研究。     

ANALYSIS OF DISSIPATIVE STRUCTURE IN MATERIAL COMMINUTION

ＡＮＡＬＹＳＩＳＯＦＤＩＳＳＩＰＡＴＩＶＥＳＴＲＵＣＴＵＲＥＩＮＭＡＴＥＲＩＡＬ　ＣＯＭＭＩＮＵＴＩＯＮＺｈａｎｇ；Ｚｈｉｔｉｅ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｉｃａｌＥｎｇｉｎｅｅｒｉｎｇ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆＴｅ...     

"THERMO": COMPUTER PROGRAM FOR SIMULATION OF SURFACE PULSE HEATING

1.IntroductionTheoneofthemostimportantparametersofthethermalcycleduringsurfacepulseheatingistherateofheatingandcooling.Knowledgeofthesevaluesinparticulartemperatureintervalshelpstoprognosticatephasestructureintheheataffectedzones(HAZ),toanalyzecausesofthestructuretransformations.Todaythereisavoluminousliteratureoncalculationofthethermalconditionsforasolidduringsurfaceprocessing.Butthetemperaturevariationsareusuallyexaminedasafunctionoftimeorspacecoordinates.Sometimesthefirstderivativeofthete…     

基于MATLAB的热定型机PID张力控制器设计

文章介绍了热定型机的工作原理,及其定型过程中张力系统控制结构图,并以此为基础建立了张力控制系统的数学模型.基于比例积分微分(PID)控制器的原理,利用MATLAB软件设计了张力控制器,其编写的PID参数整定函数能作为MATLAB函数进行直接调用.实验和仿真结果表明:该控制器完全满足张力控制系统的性能要求,降低了超调量,提高了系统的动静态性能;同时设计简单、易于实现.     

Corrosion resistance of austenitic stainless steel separator for molten carbonate fuel cell

STS310S and SC-STS310S (simultaneously co-deposited chromium and aluminum onto 310S austenitic stainless steel substrate by pack-cementation process) were used as separator materials on the cathode side of a molten carbonate fuel cell. With the STS310S, corrosion proceeded via three steps; a formation step of unstable corrosion product, a protection step against corrosion until breakaway, and an advance step of corrosion after breakaway. The final corrosion product was LiFeO₂ and the loss of mass was 6.5 mg/cm² after a corrosion test of 480 hr at 650°C. The SC-STS310S showed more effective corrosion resistance, however, than did common STS310S. There was especially no corrosion loss on the SC-STS310S after the 480 hr corrosion test. It is anticipated that it will be very useful as an alternative separator on the cathode side off the MCFC in the future.     

混凝土尿素池的腐蚀及防腐蚀措施

本文对混凝土尿素池的腐蚀原因、规律及影响因素进行了阐述，提出了混凝土尿素池的腐蚀及防腐蚀措施，延长了设备的寿命，保证了尿素生产的正常运转。     

巧用Vlookup函数完成信息核对--在招生工作中学生信息核对的应用

Excel软件功能强大,操作简便,其提供的函数可用于处理和分析复杂的数据。介绍了Excel中查找函数Vlookup的语法格式及功能,并通过工作中的具体实例来阐述利用Vlookup函数解决核对数据匹配问题,提高了工作效率,节省了大量的人力。     

青年馆员的力量

21世纪是一个信息化的知识经济时代,以计算机为代表的现代信息技术的开发利用,使图书馆发生了巨大的变革。青年馆员作为图书馆行业的新生力量,为图书馆带来了生机与活力。作为满足读者需求的重要保证,新时代的图书馆员既要拥有熟练应用图书馆相关信息技术的能力,还要拥有复合型知识结构。