Web应用分层与开发框架设计研究

对Web应用进行了合理的分层，介绍了3种主流开源框架Struts、Spring和Hibernate，应用它们作为Web应用各层的相应实现，进行了有效整合，设计了一个优秀的、完整的开发框架，给出了该框架在实践中的成功应用。     

一种轻量级的J2EE解决方案及其应用

在J2EE项目的开发过程中,开发人员多采用传统的方法,即采用EJB这种重量级的组件模型。然而在很多情况下,EJB并不是最佳的解决方案。本文提出一种轻量级的J2EE解决方案,即采用开源框架Spring、Struts和Hibernate的组合来开发企业级J2EE应用,并结合一个成功案例详细说明如何开发轻量级的J2EE企业级应用。     

60 t Consteel电弧炉-60 t LF(VD)冶炼60Si2CrVAT弹簧钢的工艺实践

西宁特钢采用60 t Consteel电弧炉-60 t LF(VD)-700 kg铸锭工艺生产60Si2CrVAT弹簧钢(%)0.56～0.64C,1.40～1.80Si,0.90～1.20Cr,0.10～0.19V,≤0.020P,≤0.020S.Consteel电弧炉偏心底出钢留渣作业,熔炼温度控制在1 560～1 590 ℃,冶炼全过程泡沫渣长弧操作,可使电弧炉出钢时钢水中磷含量≤0.015%,LF精炼时加铝脱氧,氩气搅拌,控制钢中全铝含量为0.025%～0.050%,并经VD处理使钢中氧含量达(9～12)×10-6,氢含量为(0.6～0.9)×10-6.检验结果表明,钢中A细类夹杂≤1.0级,B细类夹杂为0.5级,其余为0级.     

Low-velocity impact analysis of composite laminates using linearized contact law

Usually many researchers have used the modified Hertzian contact law or experimental static indentation law to analyze impact response of composite laminates subjected to low-velocity impact. In this study, physical meaning of the analytical method using the laws was investigated and the difference between the analytical results obtained using the two laws was also investigated. Furthermore parametric study on contact coefficient and exponent of the contact law was performed. Finally it could be shown that linearized contact law could be well applied to the low-velocity impact analysis of composite laminates. If this concept is used, any general-purpose finite element method software can be used to solve impact problem without direct developing any FEM code by each researcher. In this paper, some analytical results analyzed using a general-purpose commercial FEM software were also presented.     

基于疲劳理论的汽车空气悬架结构件的弯曲强度计算

针对某种型号客车的空气悬架，应用ANSYS软件对弹簧支架进行了有限元分析，计算了弹簧支架的应力、变形特性，在此基础上计算了弹簧支架的疲劳强度。     

Spring Maize Yield Estimation based on Radiation Use Efficiency and Multi-temporal Remotely Sensed Data

In order to develop highly accurate model for crop yield estimation,an approach of retrieving regional crop yield was studied by Radiation Use Efficiency (RUE) and remote sensing data,the Jifangzha irrigation is of Hetao irrigation district of Inner Mongolia Autonomous Region was selected as a research case.Based on this model,the difference of the Dry Matter Accumulation (DMA) between the maize’s different growing stages is made and a comparative analysis of the measured yields,and the predicted results based on this model.The results show that the DMA of the maize’s jointing stage is maximal,about 40% of total amount.The measured yield and the predicted ones based on the model has a greater correlation,the Correlation Coefficient was 0.853 and passed the reliability of 0.01.The difference of the DMA in different growing stages showed that the sensitive degree was displayed between main growing stages and yield,and that were some key aspects:the main limiting factor in growing stages and raising yield.These results indicate the model for spring maize yield estimation is feasible and effective based on the RUE and multi-temporal remotely sensing data.     

基于Java的高速公路收费管理系统的设计与实现

本文阐述了基于Struts2+Spring+Hibernate开源框架实现高速公路收费管理子系统的开发流程。本文首先对Struts2、Hibernate、Spring等框架进行论述,其次描述了系统的需求分析与总体架构设计,包括系统的功能需求、性能需求、功能结构设计和体系结构设计等;然后详细介绍了系统的各个模块的具体实现,主要模块有登陆模块、数据录入模块、维护模块等;最后,对系统进行的测试并对项目的主要工作和存在的不足做了论述。     

Development of a spring analogue approach for the study of pillars and shafts

In civil and mining operations that involve ground excavation and support, the loads are distributed between the ground and support depending on their relative stiffness. This paper presents the development of conceptual single-degree-of-freedom models, which are used to derive equations for estimating displacements and stresses for ground-support interaction problems encountered in pillars in room-andpillar mining(natural support system), and liners for circular vertical shafts(artificial support systems).For pillar assessment, mine-pillar interaction curves can be constructed using a double spring analogy.Additionally, the effectiveness of different support systems can be evaluated depending on their effect upon the mine-pillar system. For shaft design, an initial estimation of the required lining strength and thickness can be readily made based on a double ring analogue. For both problems, the results from the proposed approach compare well with those obtained by finite element numerical simulations.     

教师要学会“藏”的艺术——教学中“藏”的内涵、价值及策略

教学中“藏”的艺术主要指在教学中设置悬念、设置障碍、引而不发和境的营造。教学中经过教师精心设计的“藏”,有利于激发学生的想象力和探究欲望;有助于转变教学方式,发挥学生的主体作用;有利于活跃学生思维,促进深度学习;有利于调节课堂气氛。教师在教学中运用“藏”的艺术,需要处理好“藏”与“白”、“藏”与“时”、“藏”与“度”及“藏”与“境”的关系。     

RIA技术在学生宿舍管理系统中的应用研究

文章研究了Flex开发中常用的Remoting通信技术及Flash流媒体服务器技术,Java EE开发中常用的Spring与Hibernate框架,在此基础上,以RIA开发技术为基础,结合学生宿舍管理的实际需求,应用Flex、Spring及Hibernate开发技术,结合远程对象、数据库和Flash流媒体服务器等技术,采用B/S架构设计并实现一个功能完善、灵活性强、实用性强及界面美观的学生宿舍管理系统。该系统的上线,可减轻高校后勤人员、宿舍管理人员的工作负担,提高他们的工作效率。