Site occupations and ordering behaviour of O phase in Ti2AlNb—based intermetallics

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｏｒｔｈｏｒｈｏｍｂｉｃａｌｌｏｙｓａｒｅｏｆｇｒｅａｔｔｅｃｈ ｎｏｌｏｇ ｉｃａｌｉｎｔｅｒｅｓｔｉｎｈｉｇｈｔｅｍｐｅｒａｔｕｒｅａｐｐｌｉｃａｔｉｏｎｓｓｉｎｃｅｔｈｅｙｈａｖｅａｇｏｏｄｂａｌａｎｃｅａｍｏｎｇｓｔ     

石英砂的相变与换向器套筒铸件的变形

用呋喃树脂石英砂工艺生产牵引电机换向器套筒出现变形、裂纹等铸造缺陷,是由石英砂相变膨胀引起,后用高铬刚玉砂代替石英砂得到解决.     

Conductivity enhancement in transparetn ZnO films via Al-dopping produced by CW-CO2 laser-induced evaporation

Highly conductive transparent aluminium-doped ZnO (ZnO:A1) films were successfully deposited by CW-CO₂ laser-induced evaporation. Optimisation of evaporation parameters was based on laser power, substrate temperature, O₂ partial pressure in the vacuum chamber and amount of Al in the ZnO source pellet. ZnO:A1 films with an electrical resistivity as low as 6.6 × 10⁻²Ω·cm and an optical transmission of 80% at 500nm were obtained at laser power of 15 W, substrate temperature of about 200°C, O₂ partial pressure of 6—7 × 10⁻⁴ Torr and 5wt.% Al. Conductivity of ZnO films can be increased one order via Al-doping in ZnO films. The films obtained by laser-induced evaporation have compared quite favorably with the high quality films obtained by sputtering.     

AlF3贮仓料位计在线监控系统开发与应用

针对铝电解原材料中AlF3与Al2O3自动配料不准和难于观察及控制的现象，我厂开发应用了AlF3贮仓料位计，并与微机网络相连，实现了远程测量与在线监控，使AlF3配料更准确更均匀，电解质分子比更稳定，电解槽生产低耗高效。     

稳定态二氧化氯杀菌剂的制备及应用

稳定态二氧化氯(C1O2)是一新型杀菌消毒剂，具有高效、广谱、安全的特性，适用范围广，不产生对人体有害物质。介绍了稳定态ClO2的性质、检测、制备条件及其在有关领域的应用。     

百菌清及其三氟衍生物对番茄早疫病菌的室内抑菌活性比较

采用生长速率法测定了不同浓度的百菌清及其三氟衍生物对番茄早疫病菌Alternaria solani(Ell,et Mart.)Jones es Gmut的室内杀菌毒力。试验结果表明，百菌清及其三氟衍生物的ED50值分别为6089．89mg／L和156．43mg/L。，前者是后者的38．93倍。百菌清三氟衍生物的毒力明显高于百菌清。     

双波长分光光度法测定自来水中Fe2+和Fe3+的含量

采用双波长分光光度法测定 Fe2 和 Fe3 的方法 ,结果表明 ,在 λ1 =4 0 0 nm,λ2 =5 4 2 nm处 ,显色时间在 6 0 min～ 80 min,p H =4～ 5时能联合测定水中 Fe2 和 Fe3 ,其结果具有较高的精密度和准确度。     

5—烃基—2,3—二甲基吡嗪的合成

2,3-二基-5,6-二氢吡嗪与醛或酮在氢氧化钠的乙醇溶液中反应制得16种5-烃基-2,3-二甲基吡嗪。产率66%～90%。其中6种为新合成的化合物。产率17%～87.9%。     

CO2压缩机强烈振动的频谱诊断与治理对策

通过对安庆石化总厂化肥厂ＣＯ＿２压缩机多起强烈振动信号的频谱分析，找出了谱图上的一些规律性特征，并在理论上加以解释，文章还提出了现场应急处理的对策以及根治办法。     

Poly(N-vinyl-2-pyrrolidone) hydrogel production by ultraviolet radiation: new methodologies to accelerate crosslinking

Poly(N-vinyl-2-pyrrolidone) hydrogels produced by high-energy radiation relies on water radiolysis as a primary process leading to crosslinks. Conversely, ultraviolet direct irradiation into PVP leads to crosslinking trough pyrrolidinone moiety photolysis. However, this process showed to be rather inefficient. This work describes the crosslinking of poly(N-vinyl-2-pyrrolidone) based on hydrogen peroxide photolysis, therefore mimicking water radiolysis, using UV-C (e.g. low pressure Hg lamp) or UV-A radiation sources. The process efficiency and the properties of the hydrogel formed are discussed and compared with other methods of hydrogel production.