玻璃钢缓弯弯头模具的设计和制作

本文详细叙述了φ２００×９０°玻璃钢弯头模具的设计和制作方法。     

乳液聚合螺旋半园管夹套反应釜

本文将螺旋半园管夹套反应釜与传统的夹套反应釜进行了对比 ,并介绍了螺旋半园管夹套釜在乳液聚合中的应用     

Direct atomic scale analysis of the distribution of Cu valence states in Cu/γ-Al2O3 catalysts

In this paper, the microstructure of a 1 wt.% Cu/γ-Al₂O₃ catalyst that was reduced in a 4% hydrogen/argon atmosphere at temperatures of 523, 773 and 1073 K, is studied by Z-contrast imaging and electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM). Results show that the copper species are well dispersed when the catalyst is reduced below 523 K. At 773 K, separated Cu(I) and Cu(0) species are found existing as ring-like and bulk-like particles. This appears to indicate that the copper has not been reduced to its metallic form due to the interaction between the copper oxide and the support. Large spherical particles having core-shell structures with Cu(I) in the shells and Cu(0) in the cores are generated when the catalyst is reduced at 1073 K. The formation of partially oxidized copper species upon reduction at 1073 K is attributed to the metallic copper interaction with the alumina support. This study also demonstrates that high-spatial resolution Z-contrast imaging and EELS performed simultaneously can provide unique information on the morphology and chemistry of metal species in supported metal catalysts.     

高密度聚乙烯6300M和2480的耐环境应力开裂性能研究

研究了成型塑料管材的两种牌号的高密度聚乙烯(HDPE)6300M和2480的耐环境应力开裂(ESCR)性能。研究中采用的测试方法为一般弯曲试片法、在管上取样的弯曲试片法和恒定压应变法-压缩环法。根据两种材料测试结果及与其他牌号HDPE测试数据比较,对他们的ESCR进行评价,并讨论和解释了HDPE结构参数,ESCR与韧性形变和脆性断裂之间的联系。     

张家口市煤气管网防腐调研

通过对煤气管道调查,掌握了管道机体腐蚀状况并查明原因,提出了加强管道防腐蚀的建议.     

Cu/ZrO2催化剂的研究进展及其应用

综述了催化剂Cu／ZrO2的制备方法及其在CO／H2、CO2／H2合成甲醇、NOx的分解、醇胺脱氢合成氨基酸、CO的氧化及CO＋NO反应等方面的应用。     

Gravity pipe flow of polymeric bulk solids in pneumatic conveying system

Various physical parameters of gravity pipes such as gravity pipe diameter, the inclination of the gravity pipe, the cone angle, temperature of the discharged material and the rate of air counter flow into the gravity pipe were studied. The results obtained from the pipe diameter and cone angle experiments showed that the mass flow rate was proportional to (D-1.4d)^2.5 and also to θ^-0.5. The results from the pipe inclination experiment showed the existence of an angle of inclination for maximum flow, which was also reported by Wieghardt [Uber einige versuche an stromungen in sand. Ingenieur Archived 20, 109-115]. The air flow experiment also showed that the mass flow rate was inversely proportional to the air counter-flow rate, and strongly influenced by the material properties. Results from the temperature experiment showed that the temperature of the material had slight effect on the mass flow rate for the temperature range that was used in the experiment. Flow visualization images showed formation of solid plugs in the pipe that played a part in influencing the behaviour and mass flow rate of solids in the system.     

��������������˲��������̽��

四川目前生产的天然气中含硫天然气占７１％，而含硫天然气对高强度钻杆会产生硫化物应力腐蚀玻裂，因此，在含硫气井进行钻杆测试时，应重视钻杆的安全问题。文章探讨了高强度钻杆硫化物应力腐蚀玻裂的机理和影响钻杆脆断时间的各种因素，并提出在一定的条件下，高强度钻杆在含硫气并中进行测试是安全的。采用向钻杆内加缓蚀剂或内涂层钻杆，防硫油管测试，钻杆测试更加安全。建议继续开展高强度钻杆硫化物应力腐蚀玻裂时间的试验研究，以确定合理的钻杆测试安全时间。     

倒虹吸管管径计算的迭代法

本文先将倒虹吸管的管径计算公式整理成等式左边只含管径的一次方法，右边含有管径高阶非线性的迭代函数，然后证明该迭代函数收敛，最后利用数学迭代原理给迭代函数右边赋初值，计算左边的管径。继续迭代下去，就能求出倒虹吸管的管径。     

聚乙烯管材的国内外发展及应用

介绍国内外PE管材的现状和发展前景、以及管材专用料的生产、研究情况