多棒高功率固体激光器动态模匹配研究

采用光学矩阵分析了多元热透镜谐振腔内模式的动态匹配特征,给出了平平腔参数调整的关系式,实验结果与理论分析相符,并在两棒连续Nd:YAG系统上得到0W～530W功率范围的稳定输出.     

分子振动态及其跃迁的激光相干控制

讨论了激光合成相干叠加态的原理及其性质 ,针对 XY2 型分子 ,证明了合成局域模振动的可行性 ,然后给出相干叠加态的跃迁几率特征 ,发现它仍表现出相干的特性 ,对之进行分析研究表明 ,分子的振动态具有可控性 ,态跃迁几率具有可控性。     

Measurements of Stress Intensity Factors of an Interface Crack Under Mixed Mode Loading

The optical method of caustics has been utilised to measure both the stress intensity factor for a crack lying along the interface of an aluminium/epoxy bimaterial specimen, and the mode mixity arising from the difference in the elastic properties across the interface. Measurements were carried out by using a novel modification to the method whereby caustics are produced and measured from both sides of the specimen, so compensating automatically for the distortion induced in the specimen due to misaligned loading fixtures. A flat reflective surface across the interface was obtained by adhering a reflective coating to the specimen. Verification that this coating does not affect measurement accuracy was obtained by comparing stress intensity factors measured from coated and uncoated monolithic aluminium specimens where good agreement was found to exist between both measurements.     

一种独立于被管系统的网络性能管理系统

本文提出了一种在广播信道上基于倾听机制的独立网络性能管理系统。这种系统适用于用物理广播信道连接，但存在多种协议体系结构的网络系统，例如ＣＩＭＳ网络。     

美籍华裔专家讲通信工程技术新动态

本文扼要介绍１９９５年北京中美工程技术研讨会通信组五位美籍华裔专家关于通信技术新动态的专题报告。一是宽带综合业务数字网的同步数字系列（ＳＤＨ）和异步转移模式（ＡＴＭ）；二是光纤通信系统的光放大器（ＯＦＡ）、波分多路（ＷＤＭ）、光电子集成（ＯＥＩＣ）、色散补偿和新型光纤；三是蜂窝网车载移动通信和全国性个人通信业务（ＰＣＳ）、时分多址（ＴＤＭＡ）和码分多址（ＣＤＭＡ），四是智能网（ＩＮ）体系结构、概念模型和业务管理系统（ＳＭＳ）；五是数字传输网的恢复（ＦＡＳＴＡＲ）、维护（ＴＭＰ）和供应（ＴＳＮＯＷ）三种管理平台，及综合网络管理系统（ＩＮＭＳ）。     

SMS——智能网的业务管理系统

本文叙述了智能网的业务管理系统所实现的３种功能：业务管理功能，网络管理功能和业务管理访问功能，还介绍了业务管理和网络管理之间的关系，ＳＭＳ的集中式和分布式两种体系结构及业务管理功能的设计方法和进一步研究方向。     

Selecting a waste management option using a life-cycle analysis approach

Solid-waste management, and in particular the disposal of used packaging, is currently the subject of much topical debate. This is driven by both consumer and legislative pressures. Consumers see used packaging as a highly visible element of municipal solid waste, complaining of excessive packaging and low levels of recycling. Legislators, perhaps in pandering to the views expressed by consumer bodies, have been active within the CEC and individual Member States by introducing (or proposing) legislation or similar regulatory tools and targets to facilitate a greater diversion of used packaging from disposal by landfill to alternative solid-waste management practices, in particular recycling, which are widely accepted to have a lower impact on the environment. In this paper the relative environmental profiles of pursuing alternative solid-waste management practices to disposal by landfill are explored, focusing not just on solid waste per se but also on associated considerations of energy consumption and emissions, which are invariably overlooked as factors contributing to the environmental impact of solid-waste management practices.     

Electronic data acquisition forms in construction management

Effective management of construction projects depends on good access to and control of data, especially data pertaining to cost and schedule control functions. However, the proper design and development of automated mechanisms have not had the facility to acquire and store quality data in a timely manner. The purpose of this paper, then, is to discuss a prototype, automated data acquisition system that was developed to support an integrated project management system. The data acquisition system is composed of an integrated set of electronic forms used in conjunction with a bar coding data-entry tool.     

耦合腔行波管慢波结构的工作模式及其特性

耦合腔行波管慢波结构可工作于三种不同模式：正常模、简并模和反向模。应用改进的等效电路法计算了正常模腔通带和槽通带。求得的简并模耦合槽张角与实验值相符。最后讨论了反向模耦合腔行波管诱人的特点。     

米塔尔钢铁集团的全球并购发展战略

概述了米塔尔的并购经过和并购特点,着重探讨了米塔尔的管理模式、人员情况、钢铁厂布局、生产经营、主要战略伙伴、研发机构及其生产、采购与销售策略。系统地分析了米塔尔在中国的发展,指出米塔尔在全球钢铁业整合中处于领先地位,米塔尔来中国投资看中的是中国的原料和市场,且运作步伐明显加快,会对中国钢铁企业构成很大的威胁。