Atomization of metal fluorides for enhanced flow characteristics of a multicomponent powder

The National Aeronautics and Space Administration's (NASA's) PS304 coating is a plasma spray deposited tribological coating with feedstock composed of NiCr, Cr₂O₃, Ag and BaF₂-CaF₂ powders. The effects of rounded BaF₂-CaF₂ particles on the gravity-fed flow characteristics of PS304 feedstock have been investigated. The BaF₂-CaF₂ powder was fabricated by water atomization using four sets of process parameters. Each of these powders was then characterized by microscopy and classified by screening to obtain 45-106 μm particles and added incrementally from 0-10 wt.% to the other constituents of the PS304 feedstock, namely nichrome, chromia and silver powders. The relationship between feedstock flow rate, measured with the Hall flowmeter, and concentration of fluorides was found to be linear in each case. The slopes of the lines were between those of the linear relationships previously reported using angular and spherical fluorides and were closer to the relationship predicted using the rule of mixtures. The results offer a fluoride fabrication technique potentially more cost-effective than gas atomization processes or traditional comminution processes.     

中国南方岩溶区岩溶地下河系统复杂水流运动特征

岩溶地下河系统水流运动多受控于岩溶多重介质环境,其主干空间展布、水体贮存、水流运动、水循环等规律的变化具多因多果性。在中国南方岩溶区岩溶地下河系统物质和能量转换的基础上,分析了其形成和演化等相关条件,研究和总结了其水流运动方向的多重性、速度的多变性、地表地下方式的转化性、时空配置的多样性及水流运动演变规律;根据维数、压力、流态等不同原则,将中国南方岩溶地下河系统水流运动方式进行分类。结合中国南方岩溶地下河系统研究现状,提出今后需加强与实践的重点。     

直流式低速风洞流动特性研究

针对新建的东北电力大学直流式低速风洞,介绍了其流场品质的测试方法和测试数据分析.包括:实验段风速、气流稳定性、流场均匀性、气流偏角、紊流度等五项,给出了测量的数值结果和相关参数的分布曲线,并确定了风机工作频率与气体流速之间的关系.     

一种基于自适应遗传算法的统一潮流控制器

提出一种自适应遗传算法的智能控制策略,并将其应用于统一潮流控制器的多变量控制中.对3个通用的标准测试函数进行了优化,将其测试结果与简单遗传算法进行了比较.仿真结果表明:自适应机制提高了算法的搜索性能,与传统PI控制相比具有更强的动态性和鲁棒性。     

科学发展观与国际共产主义运动

分析和论述了科学发展观的提出与形成过程,从"只有坚持科学发展,才能全面彰显执政能力;只有坚持以人为本,才能巩固执政基础;只有坚持全面、协调、可持续发展,才能体现社会主义制度的活力和生命力;只有坚持统筹兼顾,才能体现社会公平,最终实现共同富裕"4个方面,阐述了科学发展观对国际共产主义运动的新贡献。     

运载火箭六自由度仿真平台搭建与应用

研究运载火箭六自由度仿真系统设计问题,在传统火箭六自由度仿真平台设计中常以特定任务为导向,造成仿真系统碎片化严重,扩展重用性不足.同时,数值仿真与视景仿真的交互中存在实时驱动的问题.针对上述问题,采用面向对象的模块化设计方法,建立了运载火箭六自由度仿真模型,给出了三层结构的通用仿真框架.设计了仿真消息管理器,较好地解决了数值仿真与视景仿真的集成并保证了系统的实时性.仿真结果验证了模型建立的准确性以及仿真平台的可靠性和稳定性.仿真结果对于运载火箭设计和性能评估系统的建立有着良好的借鉴意义.     

基于分压配气和流量配气的隔爆型设备爆炸试验控制系统

综合分压配气和流量配气的特点和优势,设计了基于分压配气和流量配气原理的自动化配气控制系统,用于I类、II类隔爆型设备(d)和III类可燃性粉尘环境外壳保型设备(tD)的耐爆和传爆试验。经试验测试与比对:该系统可靠性、精确度、稳定性和重复性方面均满足GB 3836.2-2010防爆试验所规定的要求,并具有节省试验时间和试验气源的优点。     

A transient method for characterizing flow regimes in a circulating fluid bed

In recent years, although an increasing number of literature have been devoted to circulating fluidized bed (CFB), the prediction of velocities over which different fluidization regimes exist is still difficult. In this study, a transient method was applied which readily allows one to identify operational features and critical transitions. The method is based on stopping the solids flow rate into the riser when riser is operating in fully dense transport regime. The analysis of transient pressure drop data across the riser during a solids flow cut-off experiment against its time derivative demonstrate the three distinct operating regimes that exist as the gas deplete the solid out of the riser. The transient was compared to data taken under steady state operations using statistically designed experiments. Results indicated that although there were significant differences when comparing operations in dilute conditions, there were no significant differences between the two methods in the fast fluidized and dense transport regimes. The transient method was capable of reproducing the solids circulation dependence on riser solids holdup and on the axial pressure profile. This transient method offers an accurate, easy, rapid, and reproducible means of characterizing CFB operations over a wide range of flow conditions. The lack of accuracy in the dilute regime is conjectured to be due to the wide particle size distribution that resulted in segregation during the transient testing.     

基于ROC曲线的镜片舒适度眼动指标研究

基于眼动仪检测到的受试者眼动数据,提出一项新的眼动指标——眼睑间距变动百分比,并对比传统的眼跳次数、瞳孔直径等眼动指标,经过显著性和相关性分析后,最后利用受试者特征曲线（Receiver operating characteristic,ROC）曲线评价每个眼动指标对镜片舒适度的判别性能。实验结果表明,本文提出的眼睑间距变动百分比反映镜片舒适度的性能最好,瞳孔直径次之,眼跳次数和平均注视时长相仿。本实验结果证明可以通过检测患者的眼睑间距变动百分比,来准确快速地判断镜片的舒适程度。这项研究成果能帮助相关从业者从更加客观的角度评价镜片的舒适程度,也为中国当前日益严峻的近视防控形势提供了一定的技术理论帮助。     

基于离散元法的偏转型滑坡运动堆积特征分析

为了进一步认识山阳偏转型滑坡的运动特征,基于离散元数值方法对滑坡运动堆积过程进行模拟分析。结果表明:滑坡体前缘各监测点的岩土体的运动空间大小、能量传递效率及受到偏转阻止作用大小的不同是前缘岩土体运动速度表现出显著差异的主要原因;滑坡体中部各监测点的岩土体作为滑坡前、后缘岩土体能量传递的主要媒介,其运动速度表现出多次加速特征;滑坡体后缘各监测点的岩土体则主要经历加速和减速2个运动阶段。根据滑坡的运动速度和水平运程可将山阳滑坡划分为高速近程滑坡,其堆积体厚度分布总体表现为沿运动方向呈先增加后减小的变化趋势。