黑河干流中游地区耗水量变化的历史分析

黑河流域水资源极其匮乏，加之地区上的配置不均衡和中游地区水土资源的过度开发，导致黑河下游出现了严重的生态环境问题，已影响到我国北方广大地区生态环境质量，受到国家的高度重视和全社会的广泛关注。黑河水资源开发利用主要集中在中游地区，该区是全国重要的商品粮、蔬菜和经济作物生产基地之一，耗水量占流域耗水量的85％以上，是黑河的主要耗水区和径流利用区。利用黑河上游控制站莺落峡站和中游控制站正义峡站水文资料，分析了黑河中游耗水量的变化，结果表明：20世纪80年代以前黑河中游耗水量在4．4亿m^3左右，比较稳定；进入20世纪80年代以后，耗水量明显增加，80年代耗水量比70年代以前增加了1．97亿－2.49亿m^3;90年代耗水量又比80年代增加了1.64亿m^3左右；80年代以来流域耗水量呈明显增加的趋势，这是以人类活动影响为主的结果。     

南水北调中线总干渠水头优化分配

南水北调中线总干渠渠道线路长,建筑物数量大、类型多,进行水头优化分配对于节省工程投资,合理的进行总干渠工程布置有着重要的意义.通过优化计算,提出了总干渠水头优化分配方案,确定了3个渠段之间的水头分配值以及各段内分段渠道和各个建筑物的水头分配值,并对方案进行了验证.     

三峡永久船闸结构缝渗漏处理技术

在三峡永久船闸结构缝处理过程中，认真分析了结构缝渗漏的原因，通过止水检查槽进行压水检查，确定了渗漏部位。结合渗漏具体情况，采取了结构缝表面嵌填止水材料和廊道周边止水检查槽灌浆相结合的处理方法。在实施过程中，采用了多种新材料和新工艺，取得了良好的效果。     

三峡工程临时船闸坝段4.5 m升层混凝土施工

三峡临时船闸2号坝段甲块混凝土因大坝蓄水验收要求，须在50d内完成28．5m高的混凝土浇筑，如按常规大坝混凝土施工是无法完成的。工程实施中，采用了4．5m大升层混凝土施工方案，通过加快混凝土入仓速度，改进混凝土施工工艺，加强混凝土模板设计，注重混凝土初期冷却，缩短混凝土间歇期等一系列措施，提前7d完成了目标计划。临时船闸2号坝段4．5m升层混凝土的施工经验，可供大体积混凝土施工借鉴。     

黄浦江上游水源地突发性水污染事故应急处置预案探讨

阐述了水源地突发污染事件的概念、特点及其对于供水安全和城市经济社会系统安全运行的重要意义.论述了城市水源地突发污染事件应急研究的主要内容;以上海市黄浦江上游水源地为例,探讨了突发性污染事件应急处置体系的构建,并提出了相应的政策建议。     

Estimation of Aeroelastic Parameters of Bridge Decks Using Neural Networks

A new method of estimating flutter derivatives using artificial neural networks is proposed. Unlike other computational fluid dynamics based numerical analyses, the proposed method estimates flutter derivatives utilizing previously measured experimental data. One of the advantages of the neural networks approach is that they can approximate a function of many dimensions. An efficient method has been developed to quantify the geometry of deck sections for neural network input. The output of the neural network is flutter derivatives. The flutter derivatives estimation network, which has been trained by the proposed methodology, is tested both for training sets and novel testing sets. The network shows reasonable performance for the novel sets, as well as outstanding performance for the training sets. Two variations of the proposed network are also presented, along with their estimation capability. The paper shows the potential of applying neural networks to wind force approximations.     

三峡工地高压供电线路故障判断方法的探讨

高压供电设备故障特别是输电线路的高压接地故障对工地的影响是相当大的。由于接地故障为隐性故障，没有明显的物理现象，且若是长期接地可能会发展成较为严重的两相或三相短路故障，使系统解列运行直至崩溃；由于工地流动人员较多，还易造成电击事故。利用高压一相接地时在线路中产生零序电压这一特性来迅速判断和切除接地的用电设备，可以保证各项施工的顺利进行。     

三峡永久船闸工程混凝土表面缺陷处理技术

三峡永久船闸混凝土缺陷处理是严格按照标准要求进行的，处理前的混凝土缺陷素描是其中的一个重要组成部分，对查清缺陷的数量、分布、性质起到了重要作用。在此基础上制定的处理原则及分区，使混凝土缺陷处理工作做到了有的放矢、重点突出。在处理过程中采用了大量的新工艺、新材料，施工质量良好。     

Routine Highway Bridge Inspection Condition Documentation Accuracy and Reliability

Routine inspection is the most common form of highway bridge inspection to satisfy the requirements of the National Bridge Inspection Standards. The accuracy and reliability of documentation generated during these inspections are critical to the allocation of Department of Transportation construction, maintenance, and rehabilitation resources. Routine inspections are typically completed using only the visual inspection technique and rely heavily on subjective assessments made by bridge inspectors. In light of this, and given the fact that visual inspection may have other limitations that influence its reliability, the Federal Highway Administration initiated an investigation to examine the reliability of visual inspection as it is currently applied to bridges in the United States. This paper will summarize results from this study related to the accuracy and reliability of routine inspection documentation. A number of important conclusions were developed from the experimental study. Generally, it was found that all structural condition documentation is collected with significant variability. Specifically, 95% of primary element condition ratings for individual bridge components will vary within two rating points of the average and only 68% will vary within one point. Documentation generally collected to support condition ratings also has significant variability as exemplified by the number and types of field notes and photographs taken by inspectors. With respect to the use of element-level inspections, it was found that element usage was generally consistent with the Commonly Recognized Element Guide. However, there is significant variability in the condition state assignments of those elements and in some cases the condition states are not applied correctly to particular elements.     

Water quality surveys: A statistical method based on determinism, quantiles and the binomial distribution

A statistical method for surveying water quality and analysing the results in terms of quantiles is described. The value of a water quality variable in a grab-sample is taken as a deterministic function of the temporal and spatial coordinates of the sampling point. Quantiles can then be defined for any specified region in time and space as unique, fixed values, and randomly located grab-samples may be used to estimate them for the purposes of describing or regulating water quality. Robust statistical inferences are possible using the binomial distribution. Properties of the quantiles, confidence limits, comparisons with fixed values or between regions, assessment of trends, simultaneous inferences and estimation of sample sizes are discussed. Two examples of water quality surveys, one of Port Phillip Bay, the other of the Maribyrnong River, Victoria, are used to illustrate the theory, paying particular attention to practical problems which arose. The proposed method is compared with others based on stochastic models, and is claimed to be simpler and more reliable.