Prediction of evaporation heat transfer coefficient and pressure drop of refrigerant mixtures

A study on the prediction of heat transfer coefficient (HTC) and pressure drop of refrigerant mixtures is reported. HTCs and pressure drops of prospective mixtures to replace R12 and R22 are predicted on the same cooling capacity basis. Results indicate that nucleate boiling is suppressed at qualities greater than 20.0% for all mixtures and evaporation becomes the main heat transfer mechanism. For the same capacity, some mixtures containing R32 and R152a show 8.0–10.0% increase in HTCs. Some mixtures with large volatility difference exhibit as much as 55.0% reduction compared with R12 and R22, caused by mass transfer resistance and property degradation due to mixing (32.0%) and reduced mass flow rates (23.0%). Other mixtures with moderate volatility difference exhibit 20.0–30.0% degradation due mainly to reduced mass flow rates. The overall impact of heat transfer degradation, however, is insignificant if major heat transfer resistance exists in the heat transfer fluid side (air system). If the resistance in the heat transfer fluid side is of the same order of magnitude as that on the refrigerant side (water system), considerable reduction in overall HTC of up to 20% is expected. A study of the effect of uncertainties in transport properties on heat transfer shows that transport properties of liquid affect heat transfer more than other properties. Uncertainty of 10.0% in transport properties causes a change of less than 6% in heat transfer prediction.     

Performance of absorption refrigeration cycle at maximum cooling rate

The influence of irreversibility of finite-rate heat transfer on the performance of an absorption refrigerator is investigated using an endoreversible cycle model with continuous flow. The cooling rate is adopted as an objective function for refrigerator optimization. The maximum cooling rate and the corresponding coefficient of performance are derived. The optimal performance with respect to heat transfer areas of the refrigerator is analysed. In addition, certain significant conclusions are reached.     

高功率CO2激光器换热性能的研究

高功率CO2气体激光器的换热性能好坏是器件长期稳定运行的关键环节之一。本文以板翅式热交换器为例阐明了热交换器的计算和设计方法。     

Radiation transmission through a composite pure water layer of uniform and depth-dependent extinction characteristics

The paper describes the calculation of the beam solar radiation transmission across the uniform salinity upper convecting zone (UCZ) and the salinity stratified gradient zone (GZ), when the extinction coefficient is not only wavelength but also salinity-concentration dependent, assuming that the effect of scattering to be negligible. The results are useful in determining the effects of dissolved salt ions on pure water transmission, at least according to the existing measured data in the literature.     

Investigation of the Interaction of Sodium Chloride and Two Amino Sulfonic Acids,HEPES and MOPSO,by EMF Measurements

Ionic interactions in the two systems NaCl-HEPES (N-2-hydroxyethylpiperazine-N′-2-ethanesulfonic acid) and NaCl-MOPSO (3-(N-Morpholino)-2-hydroxypropanesulfonic acid) have been studied in terms of their mutual influence on the respective activity coefficients of each component. Activity coefficients for each component of the two systems and for corresponding buffers are calculated from emf measurements of solutions containing NaCl, the aminosulfonic acid, and its conjugate base in a NalSE/solution/AgCl-Ag cell at 5, 15, 25, and 37 °C.     

Compact equivalent circuit model of two‐layer spiral inductors

A compact lumped‐element equivalent circuit model of two‐layer integrated spiral inductors on silicon substrates is developed in this article. Based on this proposed model, excellent agreements are achieved between the measured and simulated S‐parameters for different inductors. Also, both self‐ and mutual inductances of two‐layer inductors are accurately extracted, and their overall performances are understood clearly. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 13: 148–153, 2003.     

Modeling of Moisture Behavior of Wood Planks in Nonvented Flat Roofs

A computer model was extended and adapted to simulate the hygrothermal behavior of building envelope-wood components. The model was used to predict moisture movement in wood planks forming the decks of nonvented flat roofs insulated with cellulose. The gradient of water potential was considered as the driving force for moisture movement in wood. The model required the determination of convective heat- and mass-transfer coefficients, the sorption curves, the effective water conductivity for different wood species, and the hygrothermal conditions within the assembly to characterize the mass-conservation equation. Once these parameters were integrated in the computer model, this approach was then validated by carrying a simulation of the drying process of wood planks using experimental data from a large-scale test.     

岩石龟裂系数法在火山岩裂缝储集层预测中的应用

 本文针对辽河东部凹陷油燕沟中生界火山岩的具体特征，采用纵波波速的比值——“龟裂系数”裂缝分析法［1,2,3］，研究了火山岩裂隙发育程度。综合龟裂系数裂缝分析及其他方法发现，该区中生界火山岩有效储集层的测井相特征主要表现为低密度、低中子、高声波时差和高伽马值等特征。此法的关键在于根据不同火山岩的岩性，选用合适的岩石骨架参数，在此基础上利用测井约束地震反演计算火山岩的层速度，进而计算出龟裂系数，然后根据已钻至火山岩井孔的测井相特征编制出火山岩预测厚度图。     

钻井液波信号处理方法比较

无线随钻测量系统中的脉冲信号受各种噪声的干扰,在井口需要还原脉冲信号,实时监测井底的情况。采用傅立叶变换和小波变换2种方法对钻井液波信号进行了处理,并尝试性地采用相关系数来评判去噪效果的优劣。对巴特沃斯、切比雪夫和小波变换3种处理方法的结果进行了比较。结果表明:小波变换对这种信号的噪声抑制效果较好;对于钻井液波信号噪声的处理,小波变换明显地优于傅里叶变换;相关系数能够用来评判钻井液波信号处理结果的优劣。     

新型电潜螺杆泵减速器齿轮干涉问题的研究

为保证齿轮设计的正确性，介绍了新型电潜螺杆泵减速器齿轮传动中存在的各种干涉现象及产生的原因和避免的条件，通过分析计算给出了避免各种干涉的变位系数的取值范围和措施。