Surface segregation studied by low-energy ion scattering: experiment and numerical simulation

The changes in surface composition of metallic alloys caused by segregation can be very efficiently studied by low-energy ion scattering (LEIS) due to the specific surface sensitivity of this technique. Investigations of single-crystal surfaces of ordered alloys are of particular interest because they provide the possibility to investigate the interplay between segregation effects and the order-disorder phase transition when passing through the transition temperature. Exemplifying these effects for bimetallic alloys we consider in particular the CuAu-system.For the quantitative interpretation of energy and angle resolved LEIS intensity distributions we compare experimental results with those from numerical simulations using the MARLOWE code which we extended with a detailed trajectory analysis. This allows us to apply various discrimination criteria, such as number of collisions, distance of closest approach, identification of the scattering crystal layer, total path length, etc. On this basis structural effects, ion survival probabilities and the influence of thermal vibrations can be studied.We demonstrate this potential by using CuAu(1 0 0) as a special example. The scattering potential parameters were calibrated with elemental single crystals of known structures and the anisotropic Debye temperatures taken from the literature showed good agreement, neutralization was of minor importance in this case. Our procedure could be successfully used for the quantitative analysis of the composition of the first and second layer as a function of temperature. These results are in good agreement with theoretical predictions.     

The Difference in Turbulent Diffusion between the Active and Passive Scalars in a Thermally Stably Stratified Medium

The difference in the turbulent diffusion between the active (heat) and passive (mass) scalars in a thermally stably stratified medium is investigated. The axisymmetric problem is treated on the formation of a turbulent circulation flow above a heated disk and on the turbulent diffusion of a passive scalar (impurity) from a continuous surface source in a stably stratified medium. The results indicate that the thermal stratification causes appreciable differences in the coefficients of turbulent transfer between the active (heat) and passive (mass) scalars. This means that the assumption of the identity of the coefficient of turbulent diffusion of heat and mass, employed in conventional models of turbulence, produces significant errors in estimating the heat and mass transfer in a thermally stably stratified medium.     

Gleeble 3800热模拟试验机在宝钢的典型应用与功能开发

热模拟试验可研究成分与各工艺参数对组织和性能的影响，用于指导产品设计和实际生产工艺的制定，还有助于建立数学模型。文章介绍了Gleeble 3800热／力模拟试验机在宝钢实际应用中的几个典型试验，包括高温热塑性试验、多道次变形试验、冷轧薄板相转变点试验和HAZ焊接热影响区热模拟试验等。这些试验可用来解决连铸、轧钢和冷轧产品热处理生产中存在的一些问题。     

催化重整装置的扩能改造

介绍湛江东兴炼油厂的重整装置由200kt／a扩能至300kt／a中有关催化重整反应动力学模拟计算软件的应用、反应工艺技术的改造、装置标定的情况。结合装置实际情况，采用两段装填、两段混氢技术提升了装置的技术水平。标定结果表明，改造后的装置达到了预期目的。     

Numerical solution for shape optimization of an impactor penetrating into a semi-infinite target

The shape of the impactor with the maximum depth of penetration (DOP) for a given impact velocity is found using a numerical procedure for solving a corresponding non-classical variational problem. It is shown that the optimum shape in a general case is close to a blunt cone. The variation of the optimal shape of the impactor and the dependence of the DOP vs. the initial (impact) velocity and friction coefficient is studied. The analysis is performed also for optimal conical impactors.     

粉尘薄膜爆轰

与普通爆轰不同，粉尘薄膜爆轰波前氧化剂与燃料处于分离状态．由于激波作用下壁面燃料的注入才于壁面附近形成燃烧的粉尘云，燃烧释放的热使激波自持形成粉尘薄膜爆轰。本文在长2、8m，横截面20mm×20mm的方型水平激波管中对此类爆轰进行了实验研究．并根据作者建立的模型对其二维结构进行了数值模拟。     

熔窑玻璃液流数值模拟的新发展

熔窑玻璃液流数值模拟的新发展赵国昌（清华大学核能技术设计研究院，１０００８４）ＮｅｗＤｅｖｅｌｏｐｍｅｎｔｏｆｔｈｅＮｕｍｅｒｉｃａｌＳｉｍｕｌａｔｉｏｎｆｏｒＦｌｏｗａｎｄＨｅａｔＴｒａｎｓｆｅｒｏｆＧｌａｓｓＭｅｌｔｉｎＴａｎｋＦｕｒｎａｃｅ￥Ｚ...     

NUMERICAL SIMULATIONS OF WHOLE FIELD BEHAVIOR FOR ROUND BUOYANT JET

ＮＵＭＥＲＩＣＡＬＳＩＭＵＬＡＴＩＯＮＳＯＦＷＨＯＬＥＦＩＥＬＤＢＥＨＡＶＩＯＲＦＯＲＲＯＵＮＤＢＵＯＹＡＮＴＪＥＴＬｉＷｅｉ，ＨｕａｉＷｅｎ－ｘｉｎ（ＷｕｈａｎＵｎｉｖｅｒｓｉｔｙｏｆＨｙｄｒａｕｌｉｃａｎｄＥｌｅｃｔｒｉｃＥｎｇｉｎｅｅｒｉｎｇ，...