Grinding-hardening with liquid nitrogen: Mechanisms and technology

This paper studies an innovative development of a steel grinding–hardening technology using an inert cryogen—liquid nitrogen. It was found that phase transformations took place during grinding with the application of liquid nitrogen and resulted in hardened surface layer in a ground component. The layer had a fine laths martensite structure which gave rise to a remarkably high hardness. It was also shown that the treatment can produce superior surface integrity, with compressive surface residual stresses and without surface oxidation. Due to the inert nature of the liquid nitrogen, the grinding process becomes environmentally conscious.     

Fluorescent Brightener 28 Removal by Ozonation or Advanced Oxidation Processes (O3/H2O2)

The aim of this work is to study the reaction of ozone and combined ozone/hydrogen peroxide mixtures with the fluorescent brightener 28 in dilute aqueous solution using controlled experimental conditions. The kinetics were also evaluated under various experimental conditions. The main ozonation by-products have been identified by High Pressure Anionic Exchange Chromatography (HPAEC) and Gas Chromatography coupled with Mass Spectrometry (GC-MS) techniques and a reaction pathway is proposed. In order to confirm this mechanism, melamine and s-triazine have been treated under the same reaction conditions and their decomposition pathways were studied.     

环己烷液相无催化剂的氧化动力学研究

采用搅拌釜反应器,在确认已排除传质因素对反应速率影响的情况下,研究了环己烷液相无催化剂的氧化反应动力学。应用自由基理论及最优化计算技术,从导出的8个候选动力学模型中,确定了最佳的动力学模型,它能满意地描述环已烷氧化过程。该动力学可为环己烷氧化工业生产操作条件的优化、反应器的选型及工业设计提供依据。     

Oxidative functionalization of carbon nanotubes in atmospheric pressure filamentary dielectric barrier discharge (APDBD)

The surface compositional and any structural changes that occur on carbon nanotubes using air-atmospheric pressure dielectric barrier discharge (APDBD) for functionalization are investigated employing Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), thermal gravimetric analysis (TGA), X-ray diffraction (XRD), and neutron diffraction techniques. Atmospheric pressure plasmas (APP) are suggested to be particularly suitable for functionalization of aligned nanotubes, where wet chemical manipulation could damage or even destroy the highly desirable vertical alignment. In this work a detailed experimental study elucidating the effects of APDBD plasma treatment parameters (e.g. power density, discharge composition, inter-electrode gap and treatment time) on the electronic structure, physical, and chemical behaviour of carbon nanotubes has been conducted. In an atmospheric air we find an optimal oxidative functionalization of CNTs in our DBD system within few seconds (<5 s) at a discharge power of ∼0.5 kW. This investigation may find useful application as functionalization technique for CNT engineered devices and sensors.     

用于甲烷选择性氧化反应制甲醇的膜催化技术

研究了将甲烷选择性地一次氧化制取甲醇的膜催化技术。采用ZrO2－Y2O3陶瓷膜，在较温和的反应条件下（常压，460℃左右），可以将甲烷选择性地一次氧化成为甲醇。     

Effects Of Ozone On The Production Of Biodegradable Dissolved Organic Carbon (BDOC) During Water Treatment

This article deals with the oxidation effect of ozone on the increasing fraction of biodegradable organic matter with the “ozotest” method, a laboratory technique which simulates the effect of ozonation and allows a complete oxidation assessment. Ozone treatment was performed on river water samples and sand filter effluent samples. Ozone consumption, reduction of UV absorbance and BDOC formation were monitored with applied ozone doses from 0 to 10 mg/L and with contact times from 0 to 60 min. The BDOC formation was optimum at an applied ozone dose of 0.25-0.5 mg O₃ per mg DOC (contact time = 5 min) corresponding to apparition of traces of residual ozone and maximum UV reduction. Maximum ozone consumption, UV reduction and BDOC formation occurred simultaneously during the first two minutes of treatment. Concerning BDOC formation, applied ozone dose showed a greater effectiveness than contact time. For the same quantity of consumed ozone, a short contact time associated with a high ozone dose was preferable to a long contact time and a low ozone dose.     

O3/H2O2 Treatment of Methyl-terf-Butyl Ether in Contaminated Waters: Effect of Background COD on the O3-Dose

The destruction of methyl-tert-butyl ether (MTBE) in contaminated waters by O₃/H₂0₂ process was studied and the influence background COD, alkalinity, and hydrogen peroxide and MTBE concentrations on process treatment efficiency and ozone dosage was investigated. The treatment efficiency was evaluated by an Efficiency Index, which is based on electrical energy requirement for ozone production. It was found that the treatment efficiency decreases linearly with increasing concentrations of MTBE at constant background COD and with background COD at constant MTBE concentration. A simplified kinetic scheme was presented to account for these observations.     

Kinetics of 1,3,6-naphthalenetrisulphonic acid ozonation in presence of activated carbon

Processes based on the simultaneous use of ozone and activated carbon have proven very effective for removing contaminants of high toxicity and low biodegradability. The present study is aimed to determine the kinetic constants involved in this purification process and their relationship with the surface chemistry of the activated carbon. For this purpose, the ozonation of 1,3,6-naphthalenetrisulphonic acid (NTS), selected as model compound, was carried out in the presence of different activated carbons. Determination of the Weisz-Prater parameter (C_WP) revealed that intraparticular diffusion limitations exist in the system for particles >500 μm. The degradation kinetics of NTS in the presence of activated carbon depends on the concentrations of both, the contaminant and the dissolved ozone, with a global reaction order of 2. The heterogeneous reaction constants were determined using a model that allowed quantification of the capacity of the activated carbon to increase the NTS degradation rate and of the chemical surface properties responsible for this increase. The basicity of the activated carbon is mainly responsible for the catalytic activity of the carbon in NTS ozonation, even though, mineral matter contributes positively to the catalytic activity.     

Pyrolysed carbon supported cobalt porphyrin: a potent catalyst for oxidation of hydrogen sulfide

Pyrolysed carbon supported cobalt porphyrin, an electrocatalyst that is frequently used for oxygen reduction in fuel cells, is evaluated for catalytic oxidation of hydrogen sulfide by dissolved dioxygen. The catalyst performs best after heat treatment at 880 °C_, at pH 8. Analysis of the reaction products reveals that sulfur is the dominant product throughout the investigated pH range 5–10. The catalyst performs much better than powdered activated carbon, granular activated carbon and different other forms of unmodified carbon catalysts. This is as far as we know the first time that heat treated cobalt porphyrins are evaluated for non-electrocatalytic applications.     

Effects of Admixtures on the Anti—oxidation Property of MgO／Si3N4 Composite Refractory

The effect of the admixtures of Al and Si metals and B4C and MgAlON compounds on the oxideation of MgO/Si3N4 composite refractory has been studied,which is a promising carbon free refractory for steel-making applicatlon.The four kinds of admixtures can be used as anti-oxidants for Si3N4,ut the mixture of Al and Si achieved the best result .The mixture can not only play the role as antioxidant,but also assist the sintering process and help form dense sintering layer,improving the property of the composite.