机组油膜振荡故障的诊断和处理

通过对广州发电厂1号机组3号轴承突发剧烈振动的现象和测试结果的分析，对振动故障进行诊断并提出解决办法，对3号轴承轴瓦进行处理后，机组恢复正常运行状态。     

An analytical expression for the power coefficient of an ideal horizontal-axis wind turbine

The paper shows that an analytical evaluation of the power coefficient C_p for an ideal horizontal-axis wind turbine can be made via an expression giving the direct relationship of C_p and the axial induction factor a. The results obtained agree closely with those obtained numerically from the usual integral expression involving several variables.     

Use of oxygen for the cleaning, passivation, and preservation of power-generating equipment at the Kharanorskaya SAPP

Studies conducted on two power-generating units at the Kharanorskaya SAPP relative to the steam-water-oxygen passivation, preservation, and partial cleaning of all boiler-heating surfaces, including the surfaces of the reheater, and passivation of the surfaces of the high-pressure heaters on the steam and water sides by the steam-oxygen method, as well as partial passivation, preservation, and cleaning of turbine blading are presented. __________ Translated from élektricheskie Stantsii, No. 6, pp. 56–64, May, 2006.     

Technical risk involved in long-term operation of steam turbines

The scope of the paper is the assessment of the technical risk involved in long-term operation of power units. Detailed analyses have been conducted for steam turbine components. The sources and consequences of risk have been identified and the probability of turbine components failure calculated. The quantitative assessment of the risk has been made and possibilities of its reduction discussed.     

外高桥900MW超临界汽轮机的合作制造概况

简述了上海汽轮机有限公司(STC)与西门子公司首次合作制造的目前国内最大容量的外高桥900MW超临界机组的一些基本情况，介绍了在合作制造中为保证生产进度和质量而采取的工艺改进、技术攻关等措施，以及通过合作制造提升了我公司的制造能力和管理水平。     

电液控制器在汽轮机控制系统中的应用

介绍了WOODWARD505电液控制器原理、功能及在包钢热电厂汽轮鼓风机控制系统的成功应用，大大改善了汽轮机的调节控制品质。     

K418B合金细晶铸造整体涡轮真空热处理工艺研究

通过力学性能评估和金相组织观察，研究五种热处理制度，两个周期的试验结果，确定了Ｋ４１８Ｂ合金细晶铸造整体涡轮的真空热处理工艺。     

计算机辅助技术在水轮机调节中的应用

将计算机辅助系统中的ＣＡＡ、ＣＡＤ、ＣＡＭ及ＣＡＴ等技术移植到水轮机调节系统中，以求在水轮机调节系统中建立一套科学的工程设计方法     

汽轮机转子热应力在线计算灰色数学模型

热应力计算中边界条件、物性参数和初始条件等模型输入参数的灰色特性，使得以近似点值为输入得到的计算结果缺乏准确性依据和度量，该文提出的灰色数学模型，用区间数代替近似点值建立灰色数学模型，得出热应力在线计算值的灰色描述，可以更好地符合工程计算需要。文中针对模型应用的复杂程度，以汽轮机转子为对象，对单纯灰边界问题给出了简单的端点计算法及其依据；对复合灰边界灰物性问题建立了差分格式的数学模型，应用区间高斯迭代算法，结合模型结构特点推导了简易的基于内包含不等式的算法，并且给出两种算法的数值算例对比。     

联合循环机组汽封系统的设计改进

介绍了联合循环汽轮机原汽封系统存在的问题以及改进后汽封系统的工作原理和运行控制过程。